PubMed Health⌕ Search

Biomedical subjects

John F Hartwig

Publications and source records attributed to John F Hartwig.

At least 55 records · Page 3Linked to original sources
PubMed2004

Regiospecific functionalization of methyl C-H bonds of alkyl groups in reagents with heteroatom functionality.

We report the regiospecific, rhodium-catalyzed borylation of saturated terminal C-H bonds in molecules with existing functionality. Moderate to good yields were obtained with the organic substrate in excess and as limiting reagent. The borylations of trialkylamines, protected alcohols, protected ketones, and fluoroalkanes occurred regiospecifically at the methyl group that is least sterically hindered. Reactions were also conducted that probed electronic effects on the alkyl borylation. These reactions showed that the borylation occurred preferentially at the methyl group that is most electron-deficient. Methods to conduct tandem borylation of C-H bonds and conversion of the resulting boronate esters to alcohols, alkylarenes, and alkyltrifluoroborates were also developed.

Alkanes↗
PubMed2004

Palladium-catalyzed addition of mono- and dicarbonyl compounds to conjugated dienes.

An intermolecular, palladium-catalyzed addition of the alpha-C-H bond of monocarbonyl and 1,3-dicarbonyl compounds to dienes has been developed, and an exploration of the scope of these reactions with a broad range of carbonyl compounds and nitriles was conducted. The combination of CpPd(allyl) and the commercially available 1,3-bis(dicyclohexylphosphino)propane (DCyPP) catalyzed the 1:1 addition of the C-H bonds of these substrates to dienes in high yields. These reactions included unusual additions of the C-H bonds of ketones, lactones, esters, and nitriles to dienes, as well as the more common additions of cyanoesters, malononitrile, and alpha-sulfonyl esters. Reactions of these substrates with both cyclic and acyclic dienes are reported. Reactions catalyzed by complexes of nonracemic chiral ligands were also conducted, and the first enantioselective version of this reaction was achieved with a Josiphos ligand with enantioselectivities up to 81%.

Journal Article↗
PubMed2004

Distinct electronic effects on reductive eliminations of symmetrical and unsymmetrical bis-aryl platinum complexes.

Symmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(2) (R = NMe(2), OMe, CH(3), H, Cl, CF(3)) and electronically unsymmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(C(6)H(4)-4-X) (R = CH(3), X = NMe(2), OMe, H, Cl, F, CF(3); R = OMe, X = NMe(2), H, Cl, F, CF(3); R = CF(3), X = H, Cl, NMe(2); and R = NMe(2), X = H, Cl) were prepared, and the rates of reductive elimination of these complexes in the presence of excess PPh(3) are reported. The platinum complexes reductively eliminated biaryl compounds in quantitative yields with first-order rate constants that were independent of the concentration of PPh(3). Plots of Log(k(obs)/k(obs(H))) vs Hammett substituent constants (sigma) of the para substituents R and X showed that the rates of reductive elimination reactions depended on two different electronic properties. The reductive elimination from symmetrical bis-aryl platinum complexes occurred faster from complexes with more electron-donating para substituents R. However, reductive elimination from a series of electronically unsymmetrical bis-aryl complexes was not faster from complexes with the more electron-donating substituents. Instead, reductive elimination was faster from complexes with a larger difference in the electronic properties of the substituents on the two platinum-bound aryl groups. The two electronic effects can complement or cancel each other. Thus, this combination of electronic effects gives rise to complex, but now more interpretable, free energy relationships for reductive elimination.

Journal Article↗
PubMed2004

Synthesis, structure, and reductive elimination chemistry of three-coordinate arylpalladium amido complexes.

Four three-coordinate arylpalladium amido complexes with a single hindered phosphine were isolated and structurally characterized. Each possessed a T-shaped geometry. Several of these complexes possessed true three-coordinate structures that lacked any additional coordination by ligand C-H bonds. All of the three-coordinate complexes underwent reductive elimination to form the corresponding triarylamine. A comparison of the rate of reaction of the three-coordinate compounds demonstrated that the rate of elimination from the pentaphenylferrocenyl di-tert-butylphosphine complex were the fastest. A comparison of the rates of reactions between three-coordinate and four-coordinate complexes showed that the rates were much faster from the three-coordinate complexes.

Amides↗
PubMed2004

Palladium-catalyzed arylation of trimethylsilyl enolates of esters and imides. High functional group tolerance and stereoselective synthesis of alpha-aryl carboxylic acid derivatives.

A general procedure for the palladium-catalyzed arylation of trimethylsilyl enolates of esters and imides is reported. In the presence of ZnF2 or Zn(O-t-Bu)2 as an additive, the trimethylsilyl enolates of esters, including those bearing alpha-alkoxy derivatives, underwent arylation in high yield with high functional group tolerance. This arylation chemistry was extended to ester derivatives bearing chiral auxiliaries to form new tertiary stereocenters. The arylation of imides bearing the Evans auxiliary proceeded with selectivities up to 90% de. Further, the arylation of the ketal developed by Ley provided alpha-aryl glycolates with excellent diastereoselectivities (90 to >98% de). This reaction provides a convenient route to the synthesis of enantiopure alpha-aryl-alpha-hydroxy esters. Reactions conducted with Zn(O-t-Bu)2 as an additive occurred at room temperature to give enhanced diastereoselectivities with both chiral reagents. Mechanistic studies showed that the reaction conditions are neutral enough that the observed diastereomeric ratios reflect kinetic selectivities.

Acetals↗
PubMed2004

Editing the stereochemical elements in an iridium catalyst for enantioselective allylic amination.

Individual diastereomeric phosphoramidites and mixtures of diastereomeric phosphoramidites were evaluated in the iridium-catalyzed amination of allylic carbonates. The original process was conducted with a phosphoramidite ligand containing a resolved 2,2-dihydroxy-1,1-binaphthyl (BINOL) group and a diastereomerically and enantiomerically pure bis(phenethyl)amino group. Evaluation of the structure of the active catalyst and relative rates for reactions in the presence of catalysts containing diastereomeric ligands led to the identification of a phosphoramidite that provided the amination product with enantiomeric excess similar to the original, more structurally and stereochemically complex ligand and that contains a racemic BINOLate and an N-benzylphenethylamino group on phosphorus.

Journal Article↗
PubMed2004

Ruthenium-catalyzed anti-Markovnikov hydroamination of vinylarenes.

A ruthenium-catalyzed intermolecular, anti-Markovnikov hydroamination of vinylarenes with secondary aliphatic and benzylic amines is reported. The combination of Ru(cod)(2-methylallyl)2, 1,5-bis(diphenylphosphino)pentane, and triflic acid was the most effective catalyst of those tested. Control reactions conducted without ligand or acid did not form the amine. The reaction of morpholine, piperidine, 4-phenylpiperazine, 4-BOC-piperazine, 4-piperidone ethylene ketal, and tetrahydroisoquinoline with styrene in the presence of 5 mol % of this catalyst formed the corresponding beta-phenethylamine products in 64-96% yield, with 99% regioselectivity, and without enamine side products. Acyclic amines such as n-hexylmethylamine and N-benzylmethylamine reacted with styrene in 63 and 50% yields, respectively. Alkyl-, methoxy-, and trifluoromethyl-substituted styrenes reacted with morpholine in the presence of this catalyst or a related one containing 1,1'-bis(diisopropylphosphino)ferrocene as ligand to give the products in 51-91%. Further, the hydroamination of alpha-methyl styrene was observed for the first time with a homogeneous transition metal catalyst. Preliminary mechanistic studies showed that the reaction occurred by direct, irreversible, anti-Markovnikov hydroamination and that the mechanism of the ruthenium-catalyzed hydroamination is likely to be distinct from that of the recently reported rhodium-catalyzed reaction.

Amination↗
PubMed2004

Imine insertion into a late metal-carbon bond to form a stable amido complex.

An arylrhodium(I) complex containing a labile dative ligand was prepared, and its reactivity toward aryl imines was investigated. The arylrhodium(I) complex (DPPE)Rh(C5H5N)(p-tol), 2, was isolated in 65% yield from [(DPPE)Rh(mu-Cl)]2, pyridine, and p-tolyllithium. Reaction of 2 with the aldimine (p-tol)CH=N(C6H4-p-CO2Me) (3a-Tol) gave the Rh amide insertion product 4 in 88% isolated yield. The solid-state structure of 4 was determined by single-crystal X-ray diffraction. The reaction of 2 with the electron-neutral and electron-rich aldimines (Ph)CH=NPh (3b) and (p-tol)CH=N(C6H4-p-OMe) (3c) also appeared to involve insertion, but the amido complexes formed from these insertions were not stable. Thus, reaction of 2 with 3b, followed by addition of Et3NHCl, gave the amine and ketimine products (Ph)(p-tol)CH-NHPh, 5, and (p-tol)(Ph)C=N(Ph), 6, in 25% and 50% yields. Several lines of data indicate that these products are formed by a sequence of transformations involving insertion of imine to give a Rh amide intermediate, beta-hydrogen elimination, cyclometalation to form a bound imine and H2, and protonolysis of the metallacycle upon addition of Et3NHCl. Consistent with this proposal, the proposed metallacycle containing the ortho-metalated ketimine ligand (p-tol)2C=N(C6H4-p-OMe) was isolated and characterized by single-crystal X-ray diffraction.

Journal Article↗
PubMed2004

Synthesis, structure, theoretical studies, and Ligand exchange reactions of monomeric, T-shaped arylpalladium(II) halide complexes with an additional, weak agostic interaction.

A series of monomeric arylpalladium(II) complexes LPd(Ph)X (L = 1-AdPtBu2, PtBu3, or Ph5FcPtBu2 (Q-phos); X = Br, I, OTf) containing a single phosphine ligand have been prepared. Oxidative addition of aryl bromide or aryl iodide to bis-ligated palladium(0) complexes of bulky, trialkylphosphines or to Pd(dba)2 (dba = dibenzylidene acetone) in the presence of 1 equiv of phosphine produced the corresponding arylpalladium(II) complexes in good yields. In contrast, oxidative addition of phenyl chloride to the bis-ligated palladium(0) complexes did not produce arylpalladium(II) complexes. The oxidative addition of phenyl triflate to PdL2 (L = 1-AdPtBu2, PtBu3, or Q-phos) also did not form arylpalladium(II) complexes. The reaction of silver triflate with (1-AdPtBu2)Pd(Ph)Br furnished the corresponding arylpalladium(II) triflate in good yield. The oxidative addition of phenyl bromide and iodide to Pd(Q-phos)2 was faster than oxidative addition to Pd(1-AdPtBu2)2 or Pd(PtBu3)2. Several of the arylpalladium complexes were characterized by X-ray diffraction. All of the arylpalladium(II) complexes are T-shaped monomers. The phenyl ligand, which has the largest trans influence, is located trans to the open coordination site. The complexes appear to be stabilized by a weak agostic interaction of the metal with a ligand C-H bond positioned at the fourth-coordination site of the palladium center. The strength of the Pd.H bond, as assessed by tools of density functional theory, depended upon the donating properties of the ancillary ligands on palladium.

Ferrous Compounds↗
PubMed2003

Trans influence on the rate of reductive elimination. Reductive elimination of amines from isomeric arylpalladium amides with unsymmetrical coordination spheres.

To determine the trans effect on the rates of reductive eliminations from arylpalladium(II) amido complexes, the reactions of arylpalladium amido complexes bearing symmetrical and unsymmetrical DPPF (DPPF = bis(diphenylphosphino)ferrocene) derivatives were studied. THF solutions of LPd(Ar)(NMeAr') (L = DPPF, DPPF-OMe, DPPF-CF3, DPPF-OMe,Ph, DPPF-Ph,CF3, and DPPF-OMe,CF3; Ar = C6H4-4-CF3; Ar' = C6H4-4-CH3, Ph, and C6H4-4-OMe) underwent C-N bond forming reductive elimination at -15 C to form the corresponding N-methyldiarylamine in high yield. Complexes ligated by symmetrical DPPF derivatives with electron-withdrawing substituents on the DPPF aryl groups underwent reductive elimination faster than complexes ligated by symmetrical DPPF derivatives with electron-donating substituents on the ligand aryl groups. Studies of arylpalladium amido complexes containing unsymmetrical DPPF ligands revealed several trends. First, the complex with the weaker donor trans to nitrogen and the stronger donor trans to the palladium-bound aryl group underwent reductive elimination faster than the regioisomeric complex with the stronger donor trans to nitrogen and the weaker donor trans to the palladium-bound aryl group. Second, the effect of varying the substituents on the phosphorus donor trans to the nitrogen was larger than the effect of varying the substituents on the phosphorus donor trans to the palladium-bound aryl group. Third, the difference in rate between the isomeric arylpalladium amido complexes was similar in magnitude to the differences in rates resulting from conventional variation of substituents on the symmetric phosphine ligands. This result suggests that the geometry of the complex is equal in importance to the donating ability of the dative ligands. The ratio of the differences in rates of reaction of the isomeric complexes was similar to the relative populations of the two geometric isomers. This result and consideration of transition state geometries suggest that the reaction rates are controlled more by substituent effects on ground state stability than on transition state energies. In addition, variation of the aryl group at the amido nitrogen showed systematically that complexes with more electron-donating groups at nitrogen undergo faster reductive elimination than those with less electron-donating groups at nitrogen.

Amides↗
PubMed2003

Room temperature borylation of arenes and heteroarenes using stoichiometric amounts of pinacolborane catalyzed by iridium complexes in an inert solvent.

Aromatic C-H borylation of arenes and heteroarenes using stoichiometric amounts of pinacolborane was catalyzed by an iridium complex generated from 1/2[Ir(OMe)(COD)]2 and 4,4'-di-tert-butyl-2,2'-bipyridine at room temperature in hexane and afforded the corresponding aryl- and heteroarylboronates in high yields with excellent regioselectivities.

Journal Article↗
PubMed2003

Intermolecular, markovnikov hydroamination of vinylarenes with alkylamines.

A transition metal-catalyzed intermolecular hydroamination of vinylarenes with alkylamines is reported. The combination of Pd(O2CCF3)4, DPPF, and TfOH was the most effective catalyst of those tested. Control experiments without palladium, acid, or ligand all occurred in low yield. The reaction of various vinylarenes with cyclic and acyclic alkylamines in the presence of 5 mol % of this catalyst formed the corresponding arylethylamine products in moderate to high yields. For example, reactions of morpholine, 4-phenylpiperazine, 4-Boc-piperazine, isoindoline, and tetrahydroisoquinoline with styrene all occurred in 58-75% yield. Acyclic amines such as N-benzylmethylamine and n-hexylmethylamine reacted with 2-vinylnaphthalene in 63% and 53% yields, respectively. Mechanistic investigations showed that the reaction occurred through an eta3-arylethyl palladium complex. The reactions of this complex with alkylamines generated product in combination with regenerating free vinylarene, Pd(0), and ammonium salt. Thus, one hurdle to developing hydroamination of vinylarenes with palladium complexes is the faster elimination of free vinylarene from the eta3-arylethyl complex than addition to form the C-N bond. The feasibility of conducting enantioselective hydroaminations with alkylamines was also examined. The product from addition of N-benzylmethylamine to 2-vinylnaphthalene was generated in 63% ee and 36% yield in the presence of Pd(OCOCF3)2, a ferrotane ligand, and TfOH cocatalyst.

Amination↗
PubMed2003

Identification of an activated catalyst in the iridium-catalyzed allylic amination and etherification. Increased rates, scope, and selectivity.

Studies were conducted to determine possible intermediates in the highly enantioselective, iridium-catalyzed amination and etherification of allylic carbonates, and these studies revealed that cyclometalation of the phosphoramidite ligand is likely to generate the active catalyst. The square-planar [Ir(COD)(L1)Cl] (L1 = P(BINOL)(bisphenethylamine)) did not react with cinnamyl carbonate, but did react with amine to generate an Ir(I) trigonal bipyramidal complex coordinated by COD, a cyclometalated kappa2-phosphoramidite, and a kappa1-phosphoramidite. This complex reacted with phosphines to generate products from replacement of the kappa1-phosphoramidite. These cyclometalated complexes were highly active catalysts for allylic amination and etherification and retained the high selectivity of the original catalyst system. In addition, these complexes combined with [Ir(cod)Cl]2 catalyzed reactions of amines with lower loadings, catalyzed reactions of alkylamines and aromatic amines that did not react with the original catalyst system, and catalyzed reactions of phenoxides under milder conditions.

Allyl Compounds↗
PubMed2003

Directly observed reductive elimination of aryl halides from monomeric arylpalladium(II) halide complexes.

Monomeric, three-coordinate arylpalladium(II) halide complexes undergo reductive elimination of aryl halide to form free haloarene and Pd(0). Reductive elimination of aryl chlorides, bromides, and iodides were observed upon the addition of P(t-Bu)3 to Pd[P(t-Bu)3](Ar)(X) (X = Cl, Br, I). Conditions to observe the equilibrium between reductive elimination and oxidative addition were established with five haloarenes. Reductive elimination of aryl chloride was most favored thermodynamically, and elimination of aryl iodide was the least favored. However, reductive elimination from the aryl chloride complex was the slowest, and reductive elimination from the aryl bromide complex was the fastest. These data show that the electronic properties of the halide, not the thermodynamic driving force for the addition of elimination reaction, control the rates for addition and elimination of haloarenes. Mechanistic data suggest that reversible reductive elimination of aryl bromide to form Pd[P(t-Bu)3] and free aryl bromide is followed by rate-limiting coordination of P(t-Bu)3 to form Pd[P(t-Bu)3]2.

Benzene Derivatives↗
PubMed2003

Distinct thermodynamics for the formation and cleavage of N-H bonds in aniline and ammonia. Directly-observed reductive elimination of ammonia from an isolated amido hydride complex.

The reactions of aryl and alkylamines with the (PCP)Ir fragment (PCP = 1,3-di-tert-butylphosphinobenzene) were studied to determine the reactivities and stabilities of amine and amido hydride complexes relative to C-H activation products. Reaction of aniline with the (PCP)Ir unit generated from (PCP)IrH2 and norbornene resulted in the N-H oxidative addition product (PhNH)(H)Ir(PCP) (1a). In contrast, reaction of this fragment with ammonia gave the ammonia complex (NH3)Ir(PCP) (2). The amido hydride complex that would be formed by oxidative addition of ammonia, (PCP)Ir(NH2)(H) (1b), was generated independently by deprotonation of the ammonia complex (NH3)Ir(H)(Cl)(PCP) (3) with KN(SiMe3)2 at low temperature. This amido hydride complex underwent reductive elimination at room temperature to form the ammonia complex 2. Addition of CO to anilide complex 1a gave (PCP)Ir(PhNH)(H)(CO) (4a). Addition of CNtBu to terminal amido complex 1b formed (PCP)Ir(NH2)(H)(CNtBu) (4b), the first structurally characterized iridium amido hydride. Complexes 4a and 4b underwent reductive elimination of aniline and ammonia; parent amido complex 4b reacted faster than anilide 4a. These observations suggest distinct thermodynamics for the formation and cleavage of N-H bonds in aniline and ammonia. Complexes 1a, 2, 4a, and 4b were characterized by single-crystal X-ray diffraction methods.

Journal Article↗