Biomedical subjects

John Kuriyan

Publications and source records attributed to John Kuriyan.

At least 19 recordsLinked to original sources

PubMed2006

The replication factor C clamp loader requires arginine finger sensors to drive DNA binding and proliferating cell nuclear antigen loading.

Replication factor C (RFC) is an AAA+ heteropentamer that couples the energy of ATP binding and hydrolysis to the loading of the DNA polymerase processivity clamp, proliferating cell nuclear antigen (PCNA), onto DNA. RFC consists of five subunits in a spiral arrangement (RFC-A, -B, -C, -D, and -E, corresponding to subunits RFC1, RFC4, RFC3, RFC2, and RFC5, respectively). The RFC subunits are AAA+ family proteins and the complex contains four ATP sites (sites A, B, C, and D) located at subunit interfaces. In each ATP site, an arginine residue from one subunit is located near the gamma-phosphate of ATP bound in the adjacent subunit. These arginines act as "arginine fingers" that can potentially perform two functions: sensing that ATP is bound and catalyzing ATP hydrolysis. In this study, the arginine fingers in RFC were mutated to examine the steps in the PCNA loading mechanism that occur after RFC binds ATP. This report finds that the ATP sites of RFC function in distinct steps during loading of PCNA onto DNA. ATP binding to RFC powers recruitment and opening of PCNA and activates a gamma-phosphate sensor in ATP site C that promotes DNA association. ATP hydrolysis in site D is uniquely stimulated by PCNA, and we propose that this event is coupled to PCNA closure around DNA, which starts an ordered hydrolysis around the ring. PCNA closure severs contact to RFC subunits D and E (RFC2 and RFC5), and the gamma-phosphate sensor of ATP site C is switched off, resulting in low affinity of RFC for DNA and ejection of RFC from the site of PCNA loading.

Adenosine Triphosphate↗

PubMed2006

Crystal structure of the catalytic alpha subunit of E. coli replicative DNA polymerase III.

Bacterial replicative DNA polymerases such as Polymerase III (Pol III) share no sequence similarity with other polymerases. The crystal structure, determined at 2.3 A resolution, of a large fragment of Pol III (residues 1-917), reveals a unique chain fold with localized similarity in the catalytic domain to DNA polymerase beta and related nucleotidyltransferases. The structure of Pol III is strikingly different from those of members of the canonical DNA polymerase families, which include eukaryotic replicative polymerases, suggesting that the DNA replication machinery in bacteria arose independently. A structural element near the active site in Pol III that is not present in nucleotidyltransferases but which resembles an element at the active sites of some canonical DNA polymerases suggests that, at a more distant level, all DNA polymerases may share a common ancestor. The structure also suggests a model for interaction of Pol III with the sliding clamp and DNA.

Bacterial Proteins↗

PubMed2006

A dimeric kinase assembly underlying autophosphorylation in the p21 activated kinases.

The p21-activated kinases (PAKs) are serine/threonine kinases that are involved in a wide variety of cellular functions including cytoskeletal motility, apoptosis, and cell cycle regulation. PAKs are inactivated by blockage of the active site of the kinase domain by an N-terminal regulatory domain. GTP-bound forms of Cdc42 and Rac bind to the regulatory domain and displace it, thereby allowing phosphorylation of the kinase domain and maximal activation. A key step in the activation process is the phosphorylation of the activation loop of one PAK kinase domain by another, but little is known about the underlying recognition events that make this phosphorylation specific. We show that the phosphorylated kinase domain of PAK2 dimerizes in solution and that this association is prevented by addition of a substrate peptide. We have identified a crystallographic dimer in a previously determined crystal structure of activated PAK1 in which two kinase domains are arranged face to face and interact through a surface on the large lobe of the kinase domain that is exposed upon release of the auto-inhibitory domain. The crystallographic dimer is suggestive of an engagement that mediates trans-autophosphorylation. Mutations at the predicted dimerization interface block dimerization and reduce the rate of autophosphorylation, supporting the role of this interface in PAK activation.

Amino Acid Sequence↗

PubMed2006

An allosteric mechanism for activation of the kinase domain of epidermal growth factor receptor.

The mechanism by which the epidermal growth factor receptor (EGFR) is activated upon dimerization has eluded definition. We find that the EGFR kinase domain can be activated by increasing its local concentration or by mutating a leucine (L834R) in the activation loop, the phosphorylation of which is not required for activation. This suggests that the kinase domain is intrinsically autoinhibited, and an intermolecular interaction promotes its activation. Using further mutational analysis and crystallography we demonstrate that the autoinhibited conformation of the EGFR kinase domain resembles that of Src and cyclin-dependent kinases (CDKs). EGFR activation results from the formation of an asymmetric dimer in which the C-terminal lobe of one kinase domain plays a role analogous to that of cyclin in activated CDK/cyclin complexes. The CDK/cyclin-like complex formed by two kinase domains thus explains the activation of EGFR-family receptors by homo- or heterodimerization.

Allosteric Regulation↗

PubMed2006

A Src-like inactive conformation in the abl tyrosine kinase domain.

The improper activation of the Abl tyrosine kinase results in chronic myeloid leukemia (CML). The recognition of an inactive conformation of Abl, in which a catalytically important Asp-Phe-Gly (DFG) motif is flipped by approximately 180 degrees with respect to the active conformation, underlies the specificity of the cancer drug imatinib, which is used to treat CML. The DFG motif is not flipped in crystal structures of inactive forms of the closely related Src kinases, and imatinib does not inhibit c-Src. We present a structure of the kinase domain of Abl, determined in complex with an ATP-peptide conjugate, in which the protein adopts an inactive conformation that resembles closely that of the Src kinases. An interesting aspect of the Src-like inactive structure, suggested by molecular dynamics simulations and additional crystal structures, is the presence of features that might facilitate the flip of the DFG motif by providing room for the phenylalanine to move and by coordinating the aspartate side chain as it leaves the active site. One class of mutations in BCR-Abl that confers resistance to imatinib appears more likely to destabilize the inactive Src-like conformation than the active or imatinib-bound conformations. Our results suggest that interconversion between distinctly different inactive conformations is a characteristic feature of the Abl kinase domain.

Amino Acid Motifs↗

PubMed2006

Mechanism of proliferating cell nuclear antigen clamp opening by replication factor C.

The eukaryotic replication factor C (RFC) clamp loader is an AAA+ spiral-shaped heteropentamer that opens and closes the circular proliferating cell nuclear antigen (PCNA) clamp processivity factor on DNA. In this study, we examined the roles of individual RFC subunits in opening the PCNA clamp. Interestingly, Rfc1, which occupies the position analogous to the delta clamp-opening subunit in the Escherichia coli clamp loader, is not required to open PCNA. The Rfc5 subunit is required to open PCNA. Consistent with this result, Rfc2.3.4.5 and Rfc2.5 subassemblies are capable of opening and unloading PCNA from circular DNA. Rfc5 is positioned opposite the PCNA interface from Rfc1, and therefore, its action with Rfc2 in opening PCNA indicates that PCNA is opened from the opposite side of the interface that the E. coli delta wrench acts upon. This marks a significant departure in the mechanism of eukaryotic and prokaryotic clamp loaders. Interestingly, the Rad.RFC DNA damage checkpoint clamp loader unloads PCNA clamps from DNA. We propose that Rad.RFC may clear PCNA from DNA to facilitate shutdown of replication in the face of DNA damage.

Chromatography, Gel↗

PubMed2006

Organization of the SH3-SH2 unit in active and inactive forms of the c-Abl tyrosine kinase.

The tyrosine kinase c-Abl is inactivated by interactions made by its SH3 and SH2 domains with the distal surface of the kinase domain. We present a crystal structure of a fragment of c-Abl which reveals that a critical N-terminal cap segment, not visualized in previous structures, buttresses the SH3-SH2 substructure in the autoinhibited state and locks it onto the distal surface of the kinase domain. Surprisingly, the N-terminal cap is phosphorylated on a serine residue that interacts with the connector between the SH3 and SH2 domains. Small-angle X-ray scattering (SAXS) analysis shows that a mutated form of c-Abl, in which the N-terminal cap and two other key contacts in the autoinhibited state are deleted, exists in an extended array of the SH3, SH2, and kinase domains. This alternative conformation of Abl is likely to prolong the active state of the kinase by preventing it from returning to the autoinhibited state.

Amino Acid Sequence↗

PubMed2006

Directed evolution of the epidermal growth factor receptor extracellular domain for expression in yeast.

The extracellular domain of epidermal growth factor receptor (EGFR-ECD) has been engineered through directed evolution and yeast surface display using conformationally-specific monoclonal antibodies (mAbs) as screening probes for proper folding and functional expression in Saccharomyces cerevisiae. An EGFR mutant with four amino acid changes exhibited binding to the conformationally-specific mAbs and human epidermal growth factor, and showed increased soluble secretion efficiency compared with wild-type EGFR. Full-length EGFR containing the mutant EGFR-ECD was functional, as assayed by EGF-dependent autophosphorylation and intracellular MAPK signaling in mammalian cells, and was expressed and localized at the plasma membrane in yeast. This approach should enable engineering of other complex mammalian receptor glycoproteins in yeast for genetic, structural, and biophysical studies.

Amino Acid Substitution↗

PubMed2006

Structure of the kinase domain of an imatinib-resistant Abl mutant in complex with the Aurora kinase inhibitor VX-680.

We present a high-resolution (2.0 A) crystal structure of the catalytic domain of a mutant form of the Abl tyrosine kinase (H396P; Abl-1a numbering) that is resistant to the Abl inhibitor imatinib. The structure is determined in complex with the small-molecule inhibitor VX-680 (Vertex Pharmaceuticals, Cambridge, MA), which blocks the activity of various imatinib-resistant mutant forms of Abl, including one (T315I) that is resistant to both imatinib and BMS-354825 (dasatinib), a dual Src/Abl inhibitor that seems to be clinically effective against all other imatinib-resistant forms of BCR-Abl. VX-680 is shown to have significant inhibitory activity against BCR-Abl bearing the T315I mutation in patient-derived samples. The Abl kinase domain bound to VX-680 is not phosphorylated on the activation loop in the crystal structure but is nevertheless in an active conformation, previously unobserved for Abl and inconsistent with the binding of imatinib. The adoption of an active conformation is most likely the result of synergy between the His(396)Pro mutation, which destabilizes the inactive conformation required for imatinib binding, and the binding of VX-680, which favors the active conformation through hydrogen bonding and steric effects. VX-680 is bound to Abl in a mode that accommodates the substitution of isoleucine for threonine at residue 315 (the "gatekeeper" position). The avoidance of the innermost cavity of the Abl kinase domain by VX-680 and the specific recognition of the active conformation explain the effectiveness of this compound against mutant forms of BCR-Abl, including those with mutations at the gatekeeper position.

Aurora Kinases↗

PubMed2006

Clamp loaders and replication initiation.

Clamp loaders are ATP-driven multiprotein machines that couple ATP hydrolysis to the opening and closing of a circular protein ring around DNA. This ring-shaped clamp slides along DNA, and interacts with numerous proteins involved in DNA replication, DNA repair and cell cycle control. Recently determined structures of clamp loader complexes from prokaryotic and eukaryotic sources have revealed exciting new details of how these complex AAA+ machines perform this essential clamp loading function.

Adenosine Triphosphate↗

PubMed2006

Crystal structure of a DNA polymerase sliding clamp from a Gram-positive bacterium.

BACKGROUND: Sliding DNA clamps are processivity factors that are required for efficient DNA replication. DNA polymerases maintain proximity to nucleic acid templates by interacting with sliding clamps that encircle DNA and thereby link the polymerase enzyme to the DNA substrate. Although the structures of sliding clamps from Gram-negative bacteria (E. coli), eukaryotes, archaea, and T4-like bacteriophages are well-known, the structure of a sliding clamp from Gram-positive bacteria has not been reported previously. RESULTS: We have determined the crystal structure of the dimeric beta subunit of the DNA polymerase III holoenzyme of Streptococcus pyogenes. The sliding clamp from this Gram-positive organism forms a ring-shaped dimeric assembly that is similar in overall structure to that of the sliding clamps from Gram-negative bacteria, bacteriophage T4, eukaryotes and archaea. The dimer has overall dimensions of approximately 90 A x approximately 70 A x approximately 25 A with a central chamber that is large enough to accommodate duplex DNA. In comparison to the circular shape of other assemblies, the S. pyogenes clamp adopts a more elliptical structure. CONCLUSION: The sequences of sliding clamps from S. pyogenes and E. coli are only 23% identical, making the generation of structural models for the S. pyogenes clamp difficult in the absence of direct experimental information. Our structure of the S. pyogenes beta subunit completes the catalog of clamp structures from all the major sequence grouping of sliding clamps. The more elliptical rather than circular structure of the S. pyogenes clamp implies that the topological nature of encircling DNA, rather than a precise geometric shape, is the most conserved aspect for this family of proteins.

Amino Acid Sequence↗

PubMed2006

Oligomerization states of the association domain and the holoenyzme of Ca2+/CaM kinase II.

Ca2+/calmodulin activated protein kinase II (CaMKII) is an oligomeric protein kinase with a unique holoenyzme architecture. The subunits of CaMKII are bound together into the holoenzyme by the association domain, a C-terminal region of approximately 140 residues in the CaMKII polypeptide. Single particle analyses of electron micrographs have suggested previously that the holoenyzme forms a dodecamer that contains two stacked 6-fold symmetric rings. In contrast, a recent crystal structure of the isolated association domain of mouse CaMKIIalpha has revealed a tetradecameric assembly with two stacked 7-fold symmetric rings. In this study, we have determined the crystal structure of the Caenorhabditis elegans CaMKII association domain and it too forms a tetradecamer. We also show by electron microscopy that in its fully assembled form the CaMKII holoenzyme is a dodecamer but without the kinase domains, either from expression of the isolated association domain in bacteria or following their removal by proteolysis, the association domains form a tetradecamer. We speculate that the holoenzyme is held in its 6-fold symmetric state by the interactions of the N-terminal approximately 1-335 residues and that the removal of this region allows the association domain to convert into a more stable 7-fold symmetric form.

Animals↗

PubMed2005

Structure of the autoinhibited kinase domain of CaMKII and SAXS analysis of the holoenzyme.

Ca2+/calmodulin-dependent protein kinase-II (CaMKII) is unique among protein kinases for its dodecameric assembly and its complex response to Ca2+. The crystal structure of the autoinhibited kinase domain of CaMKII, determined at 1.8 A resolution, reveals an unexpected dimeric organization in which the calmodulin-responsive regulatory segments form a coiled-coil strut that blocks peptide and ATP binding to the otherwise intrinsically active kinase domains. A threonine residue in the regulatory segment, which when phosphorylated renders CaMKII calmodulin independent, is held apart from the catalytic sites by the organization of the dimer. This ensures a strict Ca2+ dependence for initial activation. The structure of the kinase dimer, when combined with small-angle X-ray scattering data for the holoenzyme, suggests that inactive CaMKII forms tightly packed autoinhibited assemblies that convert upon activation into clusters of loosely tethered and independent kinase domains.

Amino Acid Sequence↗

PubMed2005

Computational docking and solution x-ray scattering predict a membrane-interacting role for the histone domain of the Ras activator son of sevenless.

The Ras-specific nucleotide exchange factor son of sevenless (SOS) is a large, multidomain protein with complex regulation, including a Ras-dependent allosteric mechanism. The N-terminal segment of SOS, the histone domain, contains two histone folds, which is highly unusual for a cytoplasmic protein. Using a combination of computational docking, small-angle x-ray scattering, mutagenesis, and calorimetry, we show that the histone domain folds into the rest of SOS and docks onto a helical linker that connects the pleckstrin-homology (PH) and Dbl-homology (DH) domains of SOS to the catalytic domain. In this model, a positively charged surface region on the histone domain is positioned so as to provide a fourth potential anchorage site on the membrane for SOS in addition to the PH domain, the allosteric Ras molecule, and the C-terminal adapter-binding site. The histone domain in SOS interacts with the helical linker, using a region of the surface that in nucleosomes is involved in histone tetramerization. Adjacent surface elements on the histone domain that correspond to the DNA-binding surface of nucleosomes form the predicted interaction site with the membrane. The orientation and position of the histone domain in the SOS model implicates it as a potential mediator of membrane-dependent activation signals.

Allosteric Regulation↗

PubMed2005

High yield bacterial expression of active c-Abl and c-Src tyrosine kinases.

The Abl and Src tyrosine kinases are key signaling proteins that are of considerable interest as drug targets in cancer and many other diseases. The regulatory mechanisms that control the activity of these proteins are complex, and involve large-scale conformational changes in response to phosphorylation and other modulatory signals. The success of the Abl inhibitor imatinib in the treatment of chronic myelogenous leukemia has shown the potential of kinase inhibitors, but the rise of drug resistance in patients has also shown that drugs with alternative modes of binding to the kinase are needed. The detailed understanding of mechanisms of protein-drug interaction and drug resistance through biophysical methods demands a method for the production of active protein on the milligram scale. We have developed a bacterial expression system for the kinase domains of c-Abl and c-Src, which allows for the quick expression and purification of active wild-type and mutant kinase domains by coexpression with the YopH tyrosine phosphatase. This method makes practical the use of isotopic labeling of c-Abl and c-Src for NMR studies, and is also applicable for constructs containing the SH2 and SH3 domains of the kinases.

Animals↗

PubMed2005

Out-of-plane motions in open sliding clamps: molecular dynamics simulations of eukaryotic and archaeal proliferating cell nuclear antigen.

Sliding clamps are ring-like multimeric proteins that encircle duplex DNA and serve as mobile DNA-bound platforms that are essential for efficient DNA replication and repair. Sliding clamps are placed on DNA by clamp loader complexes, in which the clamp-interacting elements are organized in a right-handed spiral assembly. To understand how the flat, ring-like clamps might interact with the spiral interaction surface of the clamp loader complex, we have performed molecular dynamics simulations of sliding clamps (proliferating cell nuclear antigen from the budding yeast, humans, and an archaeal species) in which we have removed one of the three subunits so as to release the constraint of ring closure. The simulations reveal significant structural fluctuations corresponding to lateral opening and out-of-plane distortions of the clamp, which result principally from bending and twisting of the beta-sheets that span the intermolecular interfaces, with smaller but similar contributions from beta-sheets that span the intramolecular interfaces within each subunit. With the integrity of these beta-sheets intact, the predominant fluctuations seen in the simulations are oscillations between lateral openings and right-handed spirals. The tendency for clamps to adopt a right-handed spiral conformation implies that once opened, the conformation of the clamp can easily match the spiraling of clamp loader subunits, a feature that is intrinsic to the recognition of DNA and subsequent hydrolysis of ATP by the clamp-bound clamp loader complex.

Archaeal Proteins↗

PubMed2005

C2 can do it, too.

In this issue of Cell, report that the C2 domain of the serine/threonine protein kinase Cdelta is a phosphotyrosine binding domain and present the crystal structure of this C2 domain bound to a peptide containing phosphotyrosine. Prior to this work, C2 domains were thought to bind only to phospholipids or to unphosphorylated proteins, and the SH2 and PTB domains were the only signaling domains known to recognize phosphotyrosine. This new role for the C2 domain links phosphotyrosine recognition directly to serine/threonine kinase activity and reveals an unexpected mechanism for crosstalk between distinct signaling pathways.

Animals↗

PubMed2005

DNA polymerase clamp loaders and DNA recognition.

Clamp loaders are heteropentameric ATPase assemblies that load sliding clamps onto DNA and are critical for processive DNA replication. The DNA targets for clamp loading are double-stranded/single-stranded junctions with recessed 3' ends (primer-template junctions). Here, we briefly review the crystal structures of clamp loader complexes and the insights they have provided into the mechanism of the clamp loading process.

Adenosine Triphosphatases↗