PubMed Health⌕ Search

Biomedical subjects

Julie V Macpherson

Publications and source records attributed to Julie V Macpherson.

At least 19 recordsLinked to original sources
PubMed2007

Factors controlling the electrodeposition of metal nanoparticles on pristine single walled carbon nanotubes.

The electrodeposition of metal (Pd and Pt) nanoparticles on networks of pristine single walled carbon nanotubes (SWNTs) has been investigated using a microelectrochemical cell. A microcapillary containing electrolyte solution and a reference electrode is contacted with a silicon oxide substrate bearing a SWNT network, connected as the working electrode. Electrodeposition is promoted by applying a potential between the SWNT network and the reference electrode. By combination of analysis of the resulting current-time curves with atomic force microscopy and field emission scanning electron microscopy imaging of the network surfaces after electrodeposition, the nature of metal nanoparticle formation on SWNTs has been elucidated. In particular, the parameters controlling nanoparticle number density, distribution, and size have been identified, with short deposition times and high driving forces favoring the formation of ultrasmall particles at high density. Capacitance and network resistance effects are minimized in the microcapillary configuration, making it possible to accurately analyze short time-scale deposition processes (millisecond time scale). Furthermore, it is also possible to make many measurements on a pristine sample, simply by moving the position of the microcapillary to a new location on the substrate.

Electrochemistry↗
PubMed2006

Scanning electrochemical microscopy: principles and applications to biophysical systems.

This review highlights numerous and wide ranging biophysical and biochemical applications of scanning electrochemical microscopy (SECM). SECM instrumentation and theoretical modelling, necessary for experimental interpretation, are outlined, followed by a detailed discussion of the diverse applications of this technique. These include the measurement of flow through membranes, the determination of kinetic parameters of reactions, the investigation of the permeability of small molecules in tissues and monitoring biological processes, such as the production of oxygen or nitric oxide by cells. The significant impact of micro-electrochemical techniques on our understanding of basic physicochemical processes at biologically relevant interfaces is also considered. Studies reviewed include transport across and within bilayers and monolayers. Recent advances in SECM include the combination of SECM with other techniques, such as atomic force microscopy and optical microscopy. These developments are highlighted, along with prospects for the future.

Algorithms↗
PubMed2006

Evanescent wave cavity ring-down spectroscopy in a thin-layer electrochemical cell.

The application of evanescent wave cavity ring-down spectroscopy (EW-CRDS) in monitoring electrogenerated species within a thin-layer electrochemical cell is demonstrated. In the proof-of-concept experiments described, ferricyanide, Fe(CN)6(3-), was produced by the transport-limited oxidation of ferrocyanide, Fe(CN)6(4-), in a thin-layer solution cell (25-250 microm) formed between an electrode and the hypotenuse of a fused-silica prism. The prism constituted one element of a high-finesse optical cavity arranged in a triangular ring geometry with light being totally internally reflected at the silica/solution interface. The cavity was pumped with the output (approximately 417 nm) of a single-mode external cavity diode laser, which was continuously scanned across the cavity modes. The presence of electrogenerated ferricyanide within the resulting evanescent field, beyond the optical interface, was detected by the enhanced loss of light trapped within the cavity, as measured by the characteristic cavity ring down. In this way, the EW-CRDS technique is sensitive to absorption in only the first few hundred nanometers of solution above the silica surface. The cavity ring-down response accompanying both cyclic voltammetric and step potential chronoamperometry experiments at a variety of electrode-surface distances is presented, and the results are shown to be well reproduced in modeling by finite element methods. The studies herein thus provide a foundation for further applications of EW-CRDS combined with electrochemistry.

Journal Article↗
PubMed2006

Assessment of the electrochemical behavior of two-dimensional networks of single-walled carbon nanotubes.

Scanning electrochemical microscopy (SECM) has been employed in the feedback mode to assess the electrochemical behavior of two-dimensional networks of single-walled carbon nanotubes (SWNTs). It is shown that, even though the network comprises both metallic and semiconducting SWNTs, at high density (well above the percolation threshold for metallic SWNTs) and with approximately millimolar concentrations of redox species the network behaves as a thin metallic film, irrespective of the formal potential of the redox couple. This result is particularly striking since the fractional surface coverage of SWNTs is only approximately 1% and SECM delivers high mass transport rates to the network. Finite element simulations demonstrate that under these conditions diffusional overlap between neighboring SWNTs is significant so that planar diffusion prevails in the gap between the SECM tip and the underlying SWNT substrate. The SECM feedback response diminishes at higher concentrations of the redox species. However, wet gate measurements show that at the solution potentials of interest the conductivity is sufficiently high that lateral conductivity is not expected to be limiting. This suggests that reaction kinetics may be a limiting factor, especially since the low surface coverage of the SWNT network results in large fluxes to the SWNTs, which are characterized by a low density of electronic states. For electroanalytical purposes, significantly, two-dimensional SWNT networks can be considered as metallic films for typical millimolar concentrations employed in amperometry and voltammetry. Moreover, SWNT networks can be inexpensively and easily formed over large scales, opening up the possibility of further electroanalytical applications.

Journal Article↗
PubMed2006

Effect of composition on the conductivity and morphology of poly(3-hexylthiophene)/gold nanoparticle composite Langmuir-Schaeffer films.

Ultrathin Langmuir-Schaeffer (LS) films were fabricated from blends of regioregular poly(3-hexylthiophene) (P3HT) and highly monodispersed dodecanethiolate-capped gold nanoparticles (Au NPs) mixed in varying weight ratios. The morphology of the ultrathin films was investigated by UV-visible absorption spectroscopy, atomic force microscopy (AFM) and field-emission scanning electron microscopy (FE-SEM). The results of the structural investigations were correlated with the lateral conductivity of the films, with P3HT in its unintentionally doped state, probed by scanning electrochemical microscopy (SECM), which proved to be a very sensitive technique. Control over the P3HT/Au NP ratio led to remarkable changes in the morphology and lateral conductivity of the films. Inclusion of Au NPs into P3HT was found to influence the ordering of P3HT, which ultimately determined the macroscopic charge transport characteristics of the films. Composite films with ca. 33% by weight of Au NPs were found to be the most ordered and exhibited the highest conductivity, substantially higher than P3HT alone. To provide insight into the film formation process, LS composite films comprising equal quantities of P3HT and Au NPs (by weight) were transferred at several surface pressures and investigated by SECM, AFM and FE-SEM.

Electrochemistry↗
PubMed2006

Examination of the spatially heterogeneous electroactivity of boron-doped diamond microarray electrodes.

Spatial variations in the electrical and electrochemical activity of microarray electrodes, fabricated entirely from diamond, have been investigated. The arrays contain approximately 50-mum-diameter boron-doped diamond (BDD) disks spaced 250 mum apart (center to center) in insulating intrinsic diamond supports, such that the BDD regions are coplanar with the intrinsic diamond. Atomic force microscopy (AFM) imaging of the surface reveals a roughness of no more than +/-10 nm over the array. Each BDD microdisk within the array contains polycrystalline BDD with a variety of different grains exposed. Using conducting-AFM, the conductivity of the different grains was found to vary within a BDD microdisk. Electrochemical imaging of the electroactivity of the microdisk electrodes using scanning electrochemical microscopy operating in substrate generation-tip collection mode revealed that, under apparently diffusion-limited steady-state conditions, there was a small variation in the response between electrodes. However, the majority of electrodes in the array appeared to show predominantly metallic behavior. For the electrodes that showed a lower activity, all grains within the microdisk supported electron transfer, albeit at different rates, as evidenced by studies on the electrodeposition of metallic silver, at potentials far negative of the flat band potential of oxygen-terminated polycrystalline diamond. The possibility of using these array electrodes for steady-state diffusion-limited measurements in electroanalytical applications is far-reaching. However, caution should be exercised in the kinetic analysis of voltammetric measurements, since wide variations in the electroactivity of individual grains are apparent when the potential is below the diffusion-limited value.

Journal Article↗
PubMed2006

Impact of grain-dependent boron uptake on the electrochemical and electrical properties of polycrystalline boron doped diamond electrodes.

A combination of high-resolution electrical and electrochemical imaging techniques, in conjunction with cathodoluminescence (CL), is used to investigate the electrochemical behavior of oxygen-terminated highly doped polycrystalline boron doped diamond (BDD). The BDD has a dopant density approximately 5 x 10(20) atoms cm(-3), grain size ca. 5-40 microm, and thickness 500 microm. CL imaging demonstrates that boron uptake is nonuniform across the surface of BDD, and conducting atomic force microscopy (C-AFM) highlights how this impacts on the local conductivity. While C-AFM shows no evidence for enhanced grain boundary conductivity, two characteristic conductivity domains are found with resistances of ca. 100 kOmega and ca. 50 MOmega. With the use of scanning electrochemical microscopy (SECM), local heterogeneities are also observed in the electroactivity of the BDD surface, consistent with the two different types of conducting regions. Local currents of the magnitude expected for metal-like behavior are observed in some regions, suggesting degenerative doping of the grains (supported by CL studies). In other regions, slower electron transfer is apparent. However, even for the reduction of Ru(NH(3))(6)(3+), which occurs at potentials far negative of the flat-band potential for oxygen-terminated BDD, all areas of the surface show some electroactivity. This study highlights that the spatially heterogeneous conductivity and corresponding electroactivity of BDD are readily resolved using a combination of C-AFM, SECM, and CL.

Journal Article↗
PubMed2005

Molecular ordering and 2D conductivity in ultrathin poly(3-hexylthiophene)/gold nanoparticle composite films.

This paper reports the first comparison of the structure and electrical conductivity properties of spin cast (SC) and Langmuir-Schaeffer (LS) films of regioregular poly(3-hexylthiophene) (P3HT). In addition, the effect of incorporating highly monodisperse Au nanoparticles (NPs), with a core diameter of approximately 5 nm, into SC and LS P3HT films is described. A detailed picture of molecular organization in the films has been obtained using ultraviolet-visible absorption spectroscopy, atomic force microscopy, field-emission scanning electron microscopy, X-ray diffraction, and X-ray reflectivity. Film morphology was correlated with pseudo-two-dimensional conductivity measured using scanning electrochemical microscopy, with P3HT in the semiconducting regime. It was found that SC films, which were slightly thicker than those formed with the LS technique, exhibited greater organization. This resulted in an order of magnitude higher lateral conductivity for the SC films. Inclusion of Au NPs (50 wt %) into both SC and LS films resulted in the formation of uniform and relatively flat (rms roughness approximately 1 nm) composite films. Surprisingly, the addition of NPs did not disrupt the characteristic crystal structure found for the native P3HT films. The effect of Au NPs on film lateral conductivity was found to be determined by the distribution of Au NPs within the polymer, which varied significantly between SC and LS films. Whereas Au NPs aggregated into hexagonally packed clusters in SC films, NPs in LS films were predominantly uniformly distributed between the lamella bilayer. It was found that, while the inclusion of Au NPs caused the lateral conductivity to decrease in SC films, in LS films, the lateral conductivity increased by a factor of 2.

Journal Article↗
PubMed2005

Electrochemical templating of metal nanoparticles and nanowires on single-walled carbon nanotube networks.

The use of single-walled carbon nanotube (SWNT) networks as templates for the electrodeposition of metal (Ag and Pt) nanostructures is described. Pristine SWNTs, grown on insulating SiO2 surfaces using catalyzed chemical vapor deposition, served as the working electrode. In the simplest case, electrical contact was made by depositing a gold strip on the SWNT substrate (device 1). Deposition of Ag and Pt over extensive periods (30 s) resulted in a high density of particles on the SWNTs, with almost contiguous nanowire formation from the Au/SWNT boundary moving to isolated nanoparticles at further distances from the contact. For direct electrochemical studies of Ag and Pt nucleation, the assembly was coated in a resist layer and a small window opened up to expose only the electrically connected SWNTs to solution (device 2). In this case, the electrochemical signature in voltammetric and amperometric studies of metal deposition was due solely to processes at the SWNTs. Coupled with high-resolution microscopy measurements (atomic force microscopy and field emission scanning electron microscopy), this approach provided detail on the nucleation and growth mechanisms of Ag and Pt on SWNTs under electrochemical control. In particular, Ag growth was found to be rapid and progressive with an increasing nanoparticle density with time, whereas Pt deposition was characterized by lower nucleation densities and slower growth rates with a tendency for larger particles to be produced over long times.

Journal Article↗
PubMed2005

Scanning electrochemical microscopy as a probe of Ag+ binding kinetics at Langmuir phospholipid monolayers.

A new method has been developed for measuring local adsorption rates of metal ions at interfaces based on scanning electrochemical microscopy (SECM). The technique is illustrated with the example of Ag+ binding at Langmuir phospholipid monolayers formed at the water/air interface. Specifically, an inverted 25 microm diameter silver disc ultramicroelectrode (UME) was positioned in the subphase of a Langmuir trough, close to a dipalmitoyl phosphatidic acid (DPPA) monolayer, and used to generate Ag+ via Ag electro-oxidation. The method involved measuring the transient current-time response at the UME when the electrode was switched to a potential to electrogenerate Ag+. Since the Ag+/Ag couple is reversible, the response is highly sensitive to local mass transfer of Ag+ away from the electrode, which, in turn, is governed by the interaction of Ag+ with the monolayer. The methodology has been used to determine the influence of surface pressure on the adsorption of Ag+ ions at a phospholipid (dipalmitoyl phosphatidic acid) Langmuir monolayer. It is shown that the capacity for metal ion adsorption at the monolayer increased as the density of surface adsorption sites increased (by increasing the surface pressure). A model for mass transport and adsorption in this geometry has been developed to explain and characterise the adsorption process.

Adsorption↗
PubMed2005

An unusual soluble beta-turn-rich conformation of prion is involved in fibril formation and toxic to neuronal cells.

A key molecular event in prion diseases is the conversion of the prion protein (PrP) from its normal cellular form (PrPC) to the disease-specific form (PrPSc). The transition from PrPC to PrPSc involves a major conformational change, resulting in amorphous protein aggregates and fibrillar amyloid deposits with increased beta-sheet structure. Using recombinant PrP refolded into a beta-sheet-rich form (beta-PrP) we have studied the fibrillization of beta-PrP both in solution and in association with raft membranes. In low ionic strength thick dense fibrils form large networks, which coexist with amorphous aggregates. High ionic strength results in less compact fibrils, that assemble in large sheets packed with globular PrP particles, resembling diffuse aggregates found in ex vivo preparations of PrPSc. Here we report on the finding of a beta-turn-rich conformation involved in prion fibrillization that is toxic to neuronal cells in culture. This is the first account of an intermediate in prion fibril formation that is toxic to neuronal cells. We propose that this unusual beta-turn-rich form of PrP may be a precursor of PrPSc and a candidate for the neurotoxic molecule in prion pathogenesis.

Animals↗
PubMed2005

Atomic force microscopy investigation of the mechanism of calcite microcrystal growth under Kitano conditions.

A combined atomic force microscopy (AFM)-inverted optical microscopy technique has been used to image the surface of calcite single microcrystals, with dimensions of 10-20 microm, at high resolution. The microcrystals were grown on a glass substrate using the Kitano method, a process that involves the outgassing of carbon dioxide from a saturated solution of calcium carbonate. The resulting increase in the supersaturation of the solution, with respect to calcium carbonate, induces crystallization. It is demonstrated, for the first time, that calcite microcrystals formed in this way exhibit a single spiral growth hillock on the (104) surface, as evidenced by a spiral step pattern, indicating that growth occurs at steps arising from an individual screw dislocation. The subsequent reactivity of these crystals under Kitano conditions has been followed in situ using AFM imaging.

Journal Article↗
PubMed2005

Characterization of batch-microfabricated scanning electrochemical-atomic force microscopy probes.

A procedure for the batch microfabrication of scanning electrochemical-atomic force microscopy (SECM-AFM) probes is described. The process yields sharp AFM tips, incorporating a triangular-shaped electrode (base width 1 microm, height 0.65 microm) at the apex. Microfabrication was typically carried out on (1)/(4) 3-in. wafers, yielding 60 probes in each run. The measured spring constant of the probes was in the range 1-1.5 N m(-1). To date, processing has been carried out twice successfully, with an estimated success rate for the fabrication process in excess of 80%, based on field emission-scanning electron microscopy imaging of all probes and current-voltage measurements on a random selection of approximately 30 probes. Steady-state voltammetric measurements for the reduction of Ru(NH(3))(6)(3+) in aqueous solution indicate that the electrode response is well-defined, reproducible, and quantitative, based on a comparison of the experimental diffusion-limited current with finite element simulations of the corresponding mass transport (diffusion) problem. Topographical imaging of a sputtered Au film with the SECM-AFM probes demonstrates lateral resolution comparable to that of conventional Si(3)N(4) AFM probes. Combined electrochemical-topographical imaging studies have been carried out on two model substrates: a 10-microm-diameter disk ultramicroelectrode (UME) and an array of 1-microm-diameter UMEs, spaced 12.5 microm apart (center to center). In both cases, an SECM-AFM probe was first employed to image the topography of the substrates. The tip was then moved back a defined distance from the surface and use to detect Ru(NH(3))(6)(2+) produced at the substrate, biased at a potential to reduce Ru(NH(3))(6)(3+), present in bulk solution, at a diffusion-controlled rate (substrate generation-tip collection mode). These studies establish the success of the batch process for the mass microfabrication of SECM-AFM tips.

Journal Article↗
PubMed2005

Nanowire probes for high resolution combined scanning electrochemical microscopy - atomic force microscopy.

We describe a method for the production of nanoelectrodes at the apex of atomic force microscopy (AFM) probes. The nanoelectrodes are formed from single-walled carbon nanotube AFM tips which act as the template for the formation of nanowire tips through sputter coating with metal. Subsequent deposition of a conformal insulating coating, and cutting of the probe end, yields a disk-shaped nanoelectrode at the AFM tip apex whose diameter is defined by the amount of metal deposited. We demonstrate that these probes are capable of high-resolution combined electrochemical and topographical imaging. The flexibility of this approach will allow the fabrication of nanoelectrodes of controllable size and composition, enabling the study of electrochemical activity at the nanoscale.

Journal Article↗
PubMed2004

Electrochemical and conductivity measurements of single-wall carbon nanotube network electrodes.

The electrochemical response of two-dimensional networks of pristine single-wall carbon nanotubes (SWNTs) has been investigated. SWNTs were grown by catalyzed chemical vapor deposition on an insulating SiO2 substrate, and then electrically contacted by lithographically defined Au electrodes. Subsequent insulation of the contact electrodes enabled the electrochemical properties of the SWNT network to be isolated and directly studied for the first time. The electrochemical activity of the SWNT network was found to be strongly dependent on the applied potential. For the same SWNT electrode, the limiting current for the oxidation of 5 mM Fe(phen)32+ was found to be much greater than expected based on the signal for the reduction of 5 mM Ru(NH3)63+. Simultaneous conductance and electrochemical measurements demonstrated decreasing conductance as the potential was scanned negative (versus Ag/AgCl) with the minimum conductance at around the reduction potential for Ru(NH3)63+. These results are consistent with the presence of both metallic and semiconducting SWNTs in the SWNT network electrode. Moreover, these results show that through appropriate choice of mediator and electrode potential, metallic SWNTs can be electrochemically addressed independently of semiconducting SWNTs.

Journal Article↗
PubMed2004

Production and properties of nanoelectrospray emitters used in Fourier transform ion cyclotron resonance mass spectrometry: implications for determination of association constants for noncovalent complexes.

Electrospray ionization (ESI) is extensively used in the analysis of biological compounds; yet some fundamental properties of this technique are not completely understood. It is widely recognized that care should be exercised when noncovalent complexes are being studied by ESI, since weak noncovalent binding can be broken or formed during the desolvation process. In the present work, spectra from the noncovalent complex, vancomycin/diacetyl-L-lysyl-D-alanyl-D-alanine, obtained from ESI and from nanoelectrospray ionization (nanoESI), have been compared. The results indicated that the milder desolvation conditions arising as a result of the smaller sizes of droplets produced in the nanoESI source attenuated effects upon weak bonds in the desolvation process. The association constant values calculated from the relative peak intensities suggest that, when using ESI, the analyzed noncovalent complex dissociated in the condensed phase during the spraying process. The influences of experimental parameters such as tip diameter and coating for nanoESI needles were investigated. Principal component analysis, a multivariate analysis method, was applied to achieve a better evaluation of the spectra obtained using different needle diameters and coatings for the analysis of the noncovalent complex vancomycin/diacetyl-L-lysyl-D-alanyl-D-alanine. It was found that 2-microm tip diameter resulted in more reproducible spectra than the larger tip diameters tested (6-20 microm).

Cyclotrons↗