Biomedical subjects

Jun Jiao

Publications and source records attributed to Jun Jiao.

9 recordsLinked to original sources

PubMed2005

Floating-potential dielectrophoresis-controlled fabrication of single-carbon-nanotube transistors and their electrical properties.

We present a floating-potential dielectrophoresis method used for the first time to achieve controlled alignment of an individual semiconducting or metallic single-walled carbon nanotube (SWCNT) between two electrical contacts with high repeatability. This result is significantly different from previous reports, in which bundles of SWCNTs were aligned between electrode arrays by a conventional dielectrophoresis process where the results were only collected from the control electrode regions. In this study, our alignment focus is not only on the regions of the control electrodes but also on those of the floating electrodes. Our results indicate that bundles of carbon nanotubes along with impurities were first moved into the region between two control electrodes while individual nanotubes without impurities were straightened and aligned between two floating electrodes. The measurements for the back-gated nanotube transistors made by this method displayed an on-off ratio and transconductance of 10(5) and 0.3 microS, respectively. These output and transport properties are comparable with those of nanotube transistors made by other methods. Most importantly, the findings in this study show an effective way to separate individual nanotubes from bundles and impurities and advance the processes for site-selective fabrication of single-SWCNT transistors and related electrical devices.

Journal Article↗

PubMed2005

Electron microscopy study of exotic nanostructures of cadmium sulfide.

In this article, two simple methods, evaporation-condensation and catalytic thermal evaporation, were used to investigate the synthesis of CdS nanostructures for nanoscale optoelectronic applications. To understand their growth mechanisms, various electron microscopy and microanalysis techniques were utilized in characterizing their morphologies, internal structures, growth directions and elemental compositions. The electron microscopy study reveals that when using the evaporation-condensation method, branched CdS nanorods and self-assembled arrays of CdS nanorods were synthesized at 800 degrees C and 1000 degrees C, respectively. Instead of morphological differences, both types of CdS nanorods grew along the [0001] direction. However, when using the catalytic thermal evaporation method (Au as the catalyst), patterned CdS nanowires and nanobelts were formed at the temperature region of 500-600 degrees C and 600-750 degrees C, respectively. Their growth direction was along the direction [1010] instead of [0001]. Based on the microscopy and microanalysis results, we propose some growth mechanisms in relation to the growth processes of those exotic CdS nanostructures.

Journal Article↗

PubMed2005

Dielectrophoretically controlled fabrication of single-crystal nickel silicide nanowire interconnects.

We report here on applying electric fields and dielectric media to achieve controlled alignment of single-crystal nickel silicide nanowires between two electrodes. Depending on the concentration of nanowire suspension and the distribution of electrical field, various configurations of nanowire interconnects, such as single, chained, and branched nanowires were aligned between the electrodes. Several alignment mechanisms, including the induced charge layer on the electrode surface, nanowire dipole-dipole interactions, and an enhanced local electrical field surrounding the aligned nanowires are proposed to explain these novel dielectrophoretic phenomena of one-dimensional nanostructures. This study demonstrates the promising potential of dielectrophoresis for constructing nanoscale interconnects using metallic nanowires as building blocks.

Journal Article↗

PubMed2005

Biosynthesis of silicon-germanium oxide nanocomposites by the marine diatom Nitzschia frustulum.

The biomineralization capacity of the photosynthetic marine diatom Nitzschia frustulum was harnessed to fabricate Si-Ge oxide nanocomposite materials. Germanium was incorporated into the diatom cell by a two-stage cultivation process. In stage 1, the N. frustulum cell suspension was grown up to cell density of 3 x 10(6) cells/mL in 0.35 mM silicic acid within a bubble-column photobioreactor. In stage 2, when all of the soluble silicon was consumed, 0.10 mM Ge(OH)4 or a mixture of 0.020 mM Ge(OH)4 and 0.25 mM Si(OH)4 were added to Si-starved cells. The cells assimilated soluble germanium by a surge uptake mechanism. The cell mass was thermally annealed in air at 800 degrees C for 6 h to oxidize carbonaceous materials. The thermally annealed cell biomass was characterized by TEM-EDS, FT-IR, and XRD. These measurements confirmed the formation nanostructured Ge-Si oxides composed of CaSiO3 and Ca3GeO5.

Calcium Compounds↗

PubMed2004

Using silver nanoparticle to enhance current response of biosensor.

In this paper, we present a simple procedure to increase the sensitivity of a glucose biosensor. The feasibility of an amperometric glucose biosensor based on immobilization of glucose oxidase (GOx) in silver (Ag) sol was investigated for the first time. GOx was simply mixed with Ag nanoparticles and cross-linked with a polyvinyl butyral (PVB) medium by glutaraldehyde. Then a platinum electrode was coated with the mixed solution. The effects of the amount of the Ag particles used, with respect to the current response for enzyme electrodes, were studied. A set of experimental results indicate that the current response for the enzyme electrode containing hydrophobic Ag sol increased from 0.531 to 31.17 microA in the solution of 10 mmol/L beta-D glucose. The time reaching the steady-state current response reduced from 60 to 20s, three times less than those without Ag particles involved.

Biosensing Techniques↗

PubMed2003

Selected-area growth of carbon nanotubes by the combination of focused ion beam and chemical vapor deposition techniques.

In this article, we report a technique for growing carbon nanotubes in a more controllable fashion, which enables us to synthesize nanotubes directly in various forms of designed patterns. This nanofabrication process is based on a combination of focused ion beam (FIB) and chemical vapor deposition (CVD) techniques. In this process, arrays of conductive patterns were first deposited on silicon substrates by directing a gaseous compound (C(9)H(16)Pt) via the capillary needle-sized nozzles within a FIB system. The substrates were then coated with catalyst and further modified by the FIB to localize the position of the catalyst. Finally, the growth of carbon nanotubes on the designed substrates was carried out by CVD of hydrocarbon gases. This fabrication technique has the advantage of positioning carbon nanotubes in selected locations. This may open up opportunities for the direct synthesis of carbon nanotubes onto almost any substrate material, thus allowing fabrication of carbon nanotube-based devices.

Gases↗

PubMed2003

Set-up and preliminary performance of a digital radiology conference system.

OBJECTIVE: To investigate the set-up and preliminary performance of a digital radiology conference system and its characteristics. METHODS: The imaging system included a dual-screen image-text workstation with a Matrox G450 demonstration dual-head card, two multimedia projectors, a large screen, and a line-pair and grey scale test card. Patient information on radiology information system (RIS) and images on picture archiving and communication system (PACS) were fetched with GE Radworks software based on Intranet and PACS. The fetching velocity and resolution and grey scale of the images were measured. RESULTS: Patient information in the form of texts and images were demonstrated successfully on two screens with Matrox G450 demonstration dual-head card and switched rapidly between text-image two-screen and image two-screen. The image fetching velocity was fast, the resolution was high, and the grey scale was good. CONCLUSION: The digital conference radiology system is good, and should be popularized.

Audiovisual Aids↗

PubMed2002

Effects of hydrogen on the formation of aligned carbon nanotubes by chemical vapor deposition.

Well-aligned carbon nanotubes with controllable properties were grown on porous silicon substrates by thermal chemical vapor deposition. The morphologies of the carbon nanotubes were varied with the introduction of H2 during the catalyst activation and/or carbon nanotube growth processes. It was found that H2 promotes the growth of carbon nanotubes while preventing the formation of spherical amorphous carbon particles. Without the introduction of H2 during the C2H2 thermal decomposition, aligned carbon nanotubes mixed with spherical carbon particles were formed on the substrate. However, with the introduction of H2, pure carbon nanotubes were synthesized. These nanotubes also had uniform diameters of 10-20 nm, which is much smaller than nanotubes synthesized without H2. The average growth rate of nanotubes was also affected by the introduction of hydrogen into the reaction chamber during nanotube growth. With the addition of hydrogen, the average growth rate changed from 78 nm/s to 145 nm/s. A possible growth mechanism, including the effect of a high ratio of H2 to C2H2, is suggested for the growth of these well-aligned carbon nanotubes with uniform diameters.

Carbon↗

PubMed2001

Dendron-Controlled Nucleation and Growth of Gold Nanoparticles We thank the University of Arizona and the Research Corporation for financial support. Acknowledgement is also made to the donors of the Petroleum Research Fund, administered by the American Chemical Society, for partial support of this research. The X-ray diffractometer was purchased with support from the U.S. National Science Foundation (CHEM-9610374). We thank Dr. K. Nebesny for help with the XPS experiments.

Explore the source record for details and available documents.

Journal Article↗