PubMed Health⌕ Search

Biomedical subjects

Karine Anselme

Publications and source records attributed to Karine Anselme.

10 recordsLinked to original sources

Quantitative kinetic analysis of gene expression during human osteoblastic adhesion on orthopaedic materials.

Little information was found in the literature about the expression on hydroxyapatite (HA) materials of genes specific of cellular adhesion molecules although more were found on titanium-based substrates. Hence, the goal of this work was to study by a kinetic approach from 30 min to 4 days the adhesion of Saos-2 cells on microporous (mHA) and non-microporous hydroxyapatite (pHA) in comparison to polished titanium. Our strategy associated the visualization of adhesion proteins inside the cells by immunohistochemistry and the quantitative expression of genes at mRNA level by real-time PCR. The cell morphology was assessed using scanning electron microscopy and the number of cells thanks to biochemical techniques. The cellular attachment was the highest on mHA from 30 min to 24 h although the cell growth on mHA was the lowest after 4 days. Generally, the Saos-2 osteoblastic cells morphology on mHA was radically different than on other surfaces with the particularity of the cytoplasmic edge, which appeared un-distinguishable from the surface. The revelation by specific antibodies of proteins of the cytoskeleton (actin) and the focal adhesions (FAK, phosphotyrosine) confirmed that adhesion and spreading were different on the 3 materials. The actin stress fibres were less numerous and shorter on mHA ceramics. Cells had more focal contacts after 4 h on mHA compared to other substrates but less after 24 h. The highest values of total proteins were extracted from mHA at 0.5 and 24 h and from pHA at 1, 4, and 96 h. The alphav and beta1 integrin, actin, FAK, and ERK gene expression were found to be different with adhesion time and with materials. C-jun expression was comparable on mHA, titanium and plastic but was largely higher than on pHA at 0.5 and 1 h. On the contrary, c-fos expression was the highest on pHA after 0.5 h and the lowest after 1h. This difference between c-fos and c-jun expression on pHA after 0.5 h could be related to the fact that these two genes may differ in their signalling pathways. The expression of the alkaline phosphatase gene after 4 days was lower on mHA compared to other materials demonstrating that the microstructure of the mHA ceramic was not favourable to Saos-2 cells differentiation. Finally, it was demonstrated in this study that HA and titanium surfaces influence as well gene expression at early times of adhesion as the synthesis of adhesion proteins but also proliferation and differentiation phases. Indeed, the signal transduction pathways involved in adhesion of Saos-2 cells on HA and titanium were confirmed by the sequential expression of alphav and beta1 integrins, FAK, and ERK genes followed by the expression of c-jun and c-fos genes for proliferation and alkaline phosphatase gene for differentiation.

Base Sequence↗

Influence of hydroxyapatite microstructure on human bone cell response.

Microstructure of calcium phosphate ceramics has been shown to influence long-term in vitro cellular events like proliferation and differentiation, and to favor bone integration in vivo. As long-term cellular events are known to be dependent of early cell adhesion events, we decided to study the in vitro influence of the microstructure of a microporous hydroxyapatite (mHA) and a nonmicroporous hydroxyapatite (pHA) ceramic on serum protein adsorption and SaOs-2 human bone cells attachment after 30 min, 1, 4, and 24 h and cell growth after 96 h. Plastic coverslips were used as controls. Hydroxyapatite composition of mHA and pHA was confirmed by X-ray diffraction and Fourier transform infra-red spectroscopy. The surface energies of ceramics were calculated from contact-angle measurements in di-iodomethane, water or complete culture medium. The total surface energy was 44.8 mJ/m(2) for pHA and 48.7 mJ/m(2) for plastic. The contact-angle measurement was impossible on mHA likely because they displayed 12% of open microporosity, pHA ceramic exhibiting only closed pores (2.5%). Moreover, the roughness amplitude was largely higher on mHA (Sa = 4.35 microm) than on pHA (Sa = 0.065 microm) and plastic (Sa = 0.042 microm). Three different techniques were used to evaluate protein adsorption on the ceramics. SDS-PAGE of desorbed proteins demonstrated that more proteins desorbed from mHA (66.02 microg/m(2)) than from pHA (17.2 microg/m(2)) or plastic (0.08 microg/m(2)). A new method was used to evaluate in situ the quantity of adsorbed total proteins: the temperature-programmed desorption (TPD) analysis coupled with mass spectrometry. The TPD analysis confirmed that 10-fold more proteins adsorbed on mHA compared with those on pHA. A direct immunolabeling on ceramics revealed than more fibronectin and serum albumin adsorbed on microporous ceramic than on dense ceramic. The morphology of SaOs-2 cells was the same on all the substrates after 30 min. At later time points, cell morphology on mHA was radically different than on other surfaces, with the particularity of the cytoplasmic edge that appeared undistinguishable from the surface. Only the extremity of the cells and lamellipodia were visible. Cells seemed like "adsorbed" by the mHA surface, whereas on plastic and pHA surfaces the cells displayed classical aspects of polygonal spreading. The cells displayed on mHA the highest initial attachment potential after 30 min, 1, 4, 24 h but the lower proliferation potential after four days. This study confirms that a microporous ceramic surface can modulate the adsorption of proteins and further the adhesion and proliferation of human bone cells.

Adsorption↗

Removal of surface by-products from sintered hydroxyapatite: effect of a chelation treatment on fibronectin adsorption and cell adhesion.

It was observed that fibronectin precipitates when deposited on hydroxyapatite (HA) ceramics. Fibronectin's known affinity for calcium and the composition of the ceramic itself suggested that calcium release could be the main cause of this aggregation effect. It was then decided to investigate the effect of a surface chelation treatment on fibronectin adsorption, and MG63 cell adhesion, onto porous ceramics of hydroxyapatite (HA), beta-tricalcium phosphate (beta-TCP), and HA/TCP biphasic material (BCP). Those ceramics were immersed in an EDTA solution and the effect of this treatment on the material composition was assayed. X-ray diffraction data showed the presence of alpha- and beta-TCP phases in HA and BCP materials, which were both completely removed by the chelation treatment in the case of HA. On BCP, alpha-TCP was removed and beta-TCP partially dissolved. The TCP material, which was pure beta-TCP, underwent a mass loss, but no change in composition was observed. Adhesion of MG63 cells was overall higher on the fibronectin-coated EDTA-treated HA material, but was especially enhanced on EDTA-treated HA. Changes in surface morphologies, as compared with the use of scanning electron microscopy, did not seem to be related to the effects observed. The EDTA treatment proved to be a very efficient way of removing by-products of HA sintered materials, and thus enhancing the biocompatibility of the material.

Adsorption↗

Modelling approach in cell/material interactions studies.

Based on our experiments, we propose a statistical modeling approach of the in vitro interactions between biological objects and materials. The objective of this paper is to provide basic principles for developing more ambitious experiments comparing the simultaneous influence of more than one or two parameters on various observations, taking advantage of convenient statistical and mathematical techniques for the treatment of measured data. Analyzing some examples of our own experiments, the essential features needed for modeling cell/material interaction studies are presented. Firstly, we describe the initial process of designing appropriate experiments that allow for comprehensive modeling. In the second part, we illustrate the different applications of a specific statistical modeling technique, the bootstrap protocol, on either the amplification of data, the elimination of correlation existing between measured parameters or, out of a set of parameters, identification of the most relevant parameter for further statistical analysis. Finally, based on recent statistical analysis tools such as the bootstrap, we illustrate the relative influence of biological and physical parameters in phenomenological studies of cell/material interactions.

Biocompatible Materials↗

Study of serum factors potentially involved in the pathogenesis of heterotopic bone formation after severe brain injury.

OBJECTIVE: To look for serum factors detectable early after head injury and predictive of heterotopic bone formation. PATIENTS AND METHODS: In this prospective study of a homogeneous population of 31 men with severe brain injury, blood samples were obtained 3 months after the accident, and levels of serum factors influenced by bone metabolism were compared between patients with and without heterotopic bone formation. As extensive fractures can influence serum factors, the patients without heterotopic bone formation were divided into two groups based on whether they had major fractures. Radionuclide bone scanning was used to validate patient classification. RESULTS: The group with heterotopic bone formation had significantly higher serum alkaline phosphatase levels (P < 0.01) and significantly lower serum leptin levels (P < 0.01), as compared to the other two groups. Body mass index and serum creatinine were comparable in the three groups. CONCLUSION: Leptin may be associated with the development of heterotopic bone formation. The antiosteogenic effect of leptin mediated by hypothalamic neurons may be impaired by hypothalamic damage related to severe brain injury.

Adult↗

Efficiency of hepatitis C virus screening strategies in general practice.

UNLABELLED: Hepatitis C viral infection (HCV) is a frequent and severe disease; screening strategies to-date remain insufficient. OBJECTIVE: To assess the efficiency of HCV screening of high-risk groups among patients consulting general practitioners. METHODS: A cost-effectiveness analysis was performed involving general medicine screening practices recorded during a survey of 127 practitioners (10,041 patients) conducted in 1997. A reference strategy, defined as HCV screening for illicit drug users and transfused patients, and five extended strategies, where the screening population was broadened to include other risk groups as well, were considered. Average cost and marginal cost-effectiveness ratios were determined for each extended strategy and compared with those observed for the reference strategy. The sensitivity of HCV screening to funding modalities, HCV seroprevalence and proportion of HCV high-risk groups among patients attending general practitioners was studied. RESULTS: The reference strategy was the most cost-effective method irrespective of the funding modality considered. Fixed practitioner payment was the least efficient funding modality. The average cost of one positive test was sensitive to variations of HCV seroprevalence in the high-risk group as well as the proportion of high-risk patients among the general practitioners' patients. CONCLUSION: Extension of hepatitis C screening to risk groups other than transfused patients and illicit drug users implies a substantial increase in healthcare costs as well as social consensus for such expenditures.

Adult↗

Relationship between bioceramics sintering and micro-particles-induced cellular damages.

We performed experimental studies to confirm the hypothesis that cellular damages occurring around implanted biphasic bioceramics could be related to a micro-particles release because of an insufficient sintering. First, an in vitro cytotoxicity study was performed on four biphasic ceramic (BCP) samples. Without treatment of the extraction medium, a cytotoxicity was observed, although after centrifugation this cytotoxicity disappeared in all samples. Second, micro-particles of hydroxyapatite (HA), beta-tricalcium phosphate (beta-TCP) and 40% beta-TCP/60%HA mixture were used for a cell inhibition study. A decrease of cell viability was observed with the increase in particles concentration. At 10000 particles per cell, the viability and proliferation were completely inhibited. Third, HA, beta-TCP and BCP ceramic granules were implanted in rabbit femoral cavities for 12 weeks. No degradation of HA granules was observed. The degradation was higher for beta-TCP (40%) than for BCP (5%). On the other hand, new bone formation was significantly higher for beta-TCP (21%) and HA (18%) than for BCP (12%). More micro-particles were formed around BCP granules than around beta-TCP, and phagocytised by macrophages. The release of ceramic micro-particles could be related to the sintering process. BCP ceramic have to be sintered at only 1160 degrees C. Consequently, HA micro-particles of BCP ceramic are incompletely sintered and easily released after immersion or implantation. The microparticles could be at the origin of local inflammation and cell damage and could perhaps modify osteogenesis. Attention must be paid to this problem especially with BCP ceramics because of the sintering difficulties of this bioceramic.

Animals↗

The influence of culture conditions on extracellular matrix proteins synthesized by osteoblasts derived from rabbit bone marrow.

The influence of culture conditions on the extracellular matrix (ECM) protein expressions of rabbit bone marrow stromal cells has been studied. The focus was on the effects of two kinds of sera, fetal calf serum (FCS) and Ultroser, on cells treated with dexamethasone. The induction of osteoblastic differentiation by dexamethasone addition is confirmed, particularly when cells are cultured in FCS. Bone marrow stromal cells produce alkaline phosphatase positive CFU-F and produce ECM with some mineralized nodules. Analysis by means of two-dimensional gel electrophoresis showed important changes in the composition of ECM proteins after dexamethasone treatment. Overexpression, underexpression, and new synthesized proteins were observed. The most significant modification was linked to the synthesis of four new proteins visible in the acidic area with a low molecular weight of around 17 kDa. These proteins did not correspond to those ECM proteins known to be induced by dexamethasone. Moreover, the effect of dexamethasone on osteoblastic differentiation induction appears very limited when cells are cultured in Ultroser compared to FCS. The protein pattern with Ultroser is different to that obtained with FCS. Cells cultured in Ultroser synthesized no new protein. The different behavior of cells according to the type of medium used is discussed in terms of the osteogenic factors present in the two different sera.

Animals↗

In vitro control of human bone marrow stromal cells for bone tissue engineering.

For the clinical application of cultured human mesenchymal stem cells (MSCs), cells must have minimal contact with fetal calf serum (FCS) because it might be a potential vector for contamination by adventitious agents. The use of human plasma and serum for clinical applications also continues to give rise to considerable concerns with respect to the transmission of known and unknown human infectious agents. With the objective of clinical applications of cultured human MSCs, we tested the ability of autologous plasma, AB human serum, FCS, and artificial serum substitutes containing animal-derived proteins (Ultroser G) or vegetable-derived proteins (Prolifix S6) to permit their growth and differentiation in vitro. To conserve as much autologous plasma as possible, we attempted to mix it at decreasing concentrations with the serum substitute containing vegetable-derived mitogenic factors. Under control conditions, by day 10 all the fibroblast colony-forming units (CFU-Fs) were alkaline phosphatase (ALP) positive. However, their number and size were highly variable among donors. Better CFU-F formation was obtained with Ultroser G, and with human AB serum and autologous plasma mixed at, respectively, 5 and 1% with Prolifix S6. The effects of these mixtures on CFU-F formation demonstrate synergy, with the human serum or plasma supplying the factors that favor differentiation of MSCs while Prolifix S6 supplies the mitogenic factors. Finally, we demonstrated the possibility of controlling human MSC growth and differentiation in vitro. Notably, by means of a minimal quantity of human serum or human plasma mixed with a new serum substitute containing vegetable-derived proteins, we displayed growth and differentiation of human MSCs comparable to that obtained with FCS or serum substitutes containing animal-derived proteins. These results will have crucial significance for future applications of cultured human MSCs in bone tissue engineering.

Alkaline Phosphatase↗

Repair of osteochondral defects with autologous chondrocytes seeded onto bioceramic scaffold in sheep.

At present, the most popular biomaterials used in cartilage tissue engineering are synthetic polymers. However, problems-such as acidic by-product accumulation and side effects in local or systemic inflammatory reactions during in vivo degradation-are drawing much attention. The polymers are also highly hydrophobic and degrade within 4 weeks, allowing insufficient time to support neocartilage formation. All these have made polymers less promising in clinical application. In this study, we tested a new bioceramic scaffold made of artificial synthesized powder of beta-tricalcium phosphate (beta-TCP) in a sheep model. Osteochondral defects were filled with a bioceramic-chondrocyte construct and neocartilage tissue completely resurfaced the cartilage defects after 24 weeks. Typical hyaline cartilage structure was generated in the engineered cartilage. Biodegradation of bioceramic was notable, leading to bioceramic fragmentation and particle formation. Numerous ceramic particles (size, 0.5-1.9 microm) and numerous macrophages were observed at the ceramic-tissue interface as well as in the marrow tissue. No macrophages were visible in the neocartilage tissue. Although long-term in vivo study is needed to further determine the pathological sequences of the beta-TCP-based cartilage construct, this study suggests that this bioceramic might be used to repair chondral or osteochondral defects and could be used as a scaffold for cartilage tissue engineering.

Animals↗