Biomedical subjects

Karl-Erich Jaeger

Publications and source records attributed to Karl-Erich Jaeger.

At least 19 recordsLinked to original sources

PubMed2007

Functional cell-surface display of a lipase-specific chaperone.

Lipases are important enzymes in biotechnology. Extracellular bacterial lipases from Pseudomonads and related species require the assistance of specific chaperones, designated "Lif" proteins (lipase specific foldases). Lifs, a unique family of steric chaperones, are anchored to the periplasmic side of the inner membrane where they convert lipases into their active conformation. We have previously shown that the autotransporter protein EstA from P. aeruginosa can be used to direct a variety of proteins to the cell surface of Escherichia coli. Here we demonstrate for the first time the functional cell-surface display of the Lif chaperone and FACS (fluorescence-activated cell sorting)-based analysis of bacterial cells that carried foldase-lipase complexes. The model Lif protein, LipH from P. aeruginosa, was displayed at the surface of E. coli cells. Surface exposed LipH was functional and efficiently refolded chemically denatured lipase. The foldase autodisplay system reported here can be used for a variety of applications including the ultrahigh-throughput screening of large libraries of foldase variants generated by directed evolution.

Biochemistry↗

PubMed2007

Learning from directed evolution: Further lessons from theoretical investigations into cooperative mutations in lipase enantioselectivity.

An earlier experimental study, which involved the directed evolution of enantioselective lipase variants from Pseudomonas aeruginosa as catalysts in the hydrolytic kinetic resolution of 2-methyl-decanoic acid p-nitrophenyl ester, provided a mutant with six mutations. Consequently, the selectivity factor was found to increase from E = 1.1 for the wild-type to E = 51 for the best mutant. Only one of the amino acid exchanges in this mutant was found to occur next to the binding pocket, the other mutations being remote. Our previous theoretical analysis with molecular-dynamics simulations helped to unveil the source of enhanced enantioselectivity: a relay mechanism that involves two of the six mutations was shown to induce strong cooperativity. In this investigation, single, double, and triple mutants were constructed and tested as enantioselective catalysts. This study supports our original postulate regarding the relay mechanism, offers further mechanistic insight into the role of individual mutations, and provides mutants that display even higher enantioselectivity (E of up to 64).

Catalysis↗

PubMed2006

Conformational analysis of the blue-light sensing protein YtvA reveals a competitive interface for LOV-LOV dimerization and interdomain interactions.

The Bacillus subtilis protein YtvA is related to plant phototropins in that it senses UVA-blue-light by means of the flavin binding LOV domain, linked to a nucleotide-binding STAS domain. The structural basis for interdomain interactions and functional regulation are not known. Here we report the conformational analysis of three YtvA constructs, by means of size exclusion chromatography, circular dichroism (CD) and molecular docking simulations. The isolated YtvA-LOV domain (YLOV, aa 25-126) has a strong tendency to dimerize, prevented in full-length YtvA, but still observed in YLOV carrying the N-terminal extension (N-YLOV, aa 1-126). The analysis of CD data shows that both the N-terminal cap and the linker region (aa 127-147) between the LOV and the STAS domain are helical and that the central beta-scaffold is distorted in the LOV domains dimers. The involvement of the central beta-scaffold in dimerization is supported by docking simulation of the YLOV dimer and the importance of this region is highlighted by light-induced conformational changes, emerging from the CD data analysis. In YtvA, the beta-strand fraction is notably less distorted and distinct light-driven changes in the loops/turn fraction are detected. The data uncover a common surface for LOV-LOV and intraprotein interaction, involving the central beta-scaffold, and offer hints to investigate the molecular basis of light-activation and regulation in LOV proteins.

Amino Acid Sequence↗

PubMed2006

Identification of novel benzoylformate decarboxylases by growth selection.

A growth selection system was established using Pseudomonas putida, which can grow on benzaldehyde as the sole carbon source. These bacteria presumably metabolize benzaldehyde via the beta-ketoadipate pathway and were unable to grow in benzoylformate-containing selective medium, but the growth deficiency could be restored by expression in trans of genes encoding benzoylformate decarboxylases. The selection system was used to identify three novel benzoylformate decarboxylases, two of them originating from a chromosomal library of P. putida ATCC 12633 and the third from an environmental-DNA library. The novel P. putida enzymes BfdB and BfdC exhibited 83% homology to the benzoylformate decarboxylase from P. aeruginosa and 63% to the enzyme MdlC from P. putida ATCC 12633, whereas the metagenomic BfdM exhibited 72% homology to a putative benzoylformate decarboxylase from Polaromonas naphthalenivorans. BfdC was overexpressed in Escherichia coli, and the enzymatic activity was determined to be 22 U/ml using benzoylformate as the substrate. Our results clearly demonstrate that P. putida KT2440 is an appropriate selection host strain suitable to identify novel benzoylformate decarboxylase-encoding genes. In principle, this system is also applicable to identify a broad range of different industrially important enzymes, such as benzaldehyde lyases, benzoylformate decarboxylases, and hydroxynitrile lyases, which all catalyze the formation of benzaldehyde.

Amino Acid Sequence↗

PubMed2006

Select the best: novel biocatalysts for industrial applications.

The number of biocatalysts needed for biotechnological applications is increasing rapidly, necessitating the development of novel identification systems. To date, strategies based on high-throughput screening and selection are applied, with the latter enabling a desired phenotype to survive under appropriate conditions. The groups of Witholt and de Lorenzo have devised a novel selection system, comprising a transcriptional regulator that is activated upon binding to the product of a biocatalytic reaction, which paves the way for easier selection of many different biocatalysts.

Bacteria↗

PubMed2006

Biocatalytic production of enantiopure cyclohexane-trans-1,2-diol using extracellular lipases from Bacillus subtilis.

Two extracellular lipases from Bacillus subtilis, B. subtilis lipase A and lipase B, have been expressed in the heterologous host Escherichia coli, biochemically characterized and used for the kinetic resolution of (rac)-trans-1,2-diacetoxycyclohexane. Both enzymes were selectively acting on the (R,R)-enantiomer of the racemic substrate, highly specifically hydrolyzing only one of the two ester groups present, thus allowing the preparation of enantiopure (R,R)- and (S,S)-cyclohexane-trans-1,2-diol. The reaction conditions for the use of purified enzyme and crude cell lyophilizate were optimized and reactions in batch and repetitive batch modes were carried out on a preparative scale to yield enantiopure product (>99% enantiomeric excess).

Bacillus subtilis↗

PubMed2006

A novel transposon for functional expression of DNA libraries.

Environmental DNA libraries are important sources for novel biocatalyst genes but activity screening for relevant enzymes is often inefficient. Therefore, we have constructed the transposon MuExpress which randomly integrates in vitro into existing bacterial artificial chromosome (BAC) or cosmid libraries and permits the inducible expression of its flanking regions in both directions. Furthermore, this transposon allows the bidirectional sequencing of the respective clones starting from unique primer binding sites.

Chromosomes, Artificial, Bacterial↗

PubMed2006

Lectin-based affinity tag for one-step protein purification.

The production of pure protein is indispensable for many applications in life sciences, however protein purification protocols are difficult to establish, and the experimental procedures are usually tedious and time-consuming. Therefore, a number of tags were developed to which proteins of interest can be fused and subsequently purified by affinity chromatography. We report here on a novel lectin-based affinity tag using the D-mannose-specific lectin LecB from Pseudomonas aeruginosa. A fusion protein was constructed consisting of yellow fluorescent protein and LecB separated by an enterokinase cleavage site. This protein was overexpressed in Escherichia coli Tuner (DE3), and the cell extract was loaded onto a column containing a mannose agarose matrix. Electrophoretically pure fusion protein at a yield of 24 mg/L culture was eluted with a D-mannose containing buffer The determination of equilibrium adsorption isotherms revealed an association constant of the lectin to the mannose agarose matrix of Ka = 3.26 x 10(5)/M. Enterokinase treatment of the purified fusion protein resulted in the complete removal of the LecB-tag. In conclusion, our results indicate that the lectin LecB of P. aeruginosa can be used as a tag for the high-yield one-step purification of recombinant proteins.

Adsorption↗

PubMed2005

Combination of computational prescreening and experimental library construction can accelerate enzyme optimization by directed evolution.

Chiral compounds can be produced efficiently by using biocatalysts. However, wild-type enzymes often do not meet the requirements of a production process, making optimization by rational design or directed evolution necessary. Here, we studied the lipase-catalyzed hydrolysis of the model substrate 1-(2-naphthyl)ethyl acetate both theoretically and experimentally. We found that a computational equivalent of alanine scanning mutagenesis based on QM/MM methodology can be applied to identify amino acid positions important for the activity of the enzyme. The theoretical results are consistent with concomitant experimental work using complete saturation mutagenesis and high-throughput screening of the target biocatalyst, a lipase from Bacillus subtilis. Both QM/MM-based calculations and molecular biology experiments identify histidine 76 as a residue that strongly affects the catalytic activity. The experiments demonstrate its important influence on enantioselectivity.

Amino Acid Substitution↗

PubMed2005

A generic system for the Escherichia coli cell-surface display of lipolytic enzymes.

EstA is an outer membrane-anchored esterase from Pseudomonas aeruginosa. An inactive EstA variant was used as an anchoring motif for the Escherichia coli cell-surface display of lipolytic enzymes. Flow cytometry analysis and measurement of lipase activity revealed that Bacillus subtilis lipase LipA, Fusarium solani pisi cutinase and one of the largest lipases presently known, namely Serratia marcescens lipase were all efficiently exported by the EstA autotransporter and also retained their lipolytic activities upon cell surface exposition. EstA provides a useful tool for surface display of lipases including variant libraries generated by directed evolution thereby enabling the identification of novel enzymes with interesting biological and biotechnological ramifications.

Amino Acid Sequence↗

PubMed2005

Multiplex-PCR-based recombination as a novel high-fidelity method for directed evolution.

A new and convenient method for the in vitro recombination of single point mutations is presented. This method efficiently reduces the introduction of novel point mutations, which usually occur during recombination processes. A multiplex polymerase chain reaction (multiplex-PCR) generates gene fragments that contain preformed point mutations. These fragments are subsequently assembled into full-length genes by a recombination-PCR step. The process of multiplex-PCR-based recombination (MUPREC) does not require DNase I digestion for gene-fragmentation and is therefore easy to perform, even with small amounts of target DNA. The protocol yields high frequencies of recombination without creating a wild-type background. Furthermore, the low error rate results in high-quality variant libraries of true recombinants, thereby minimizing the screening efforts and saving time and money. The MUPREC method was used in the directed evolution of a Bacillus subtilis lipase that can catalyse the enantioselective hydrolysis of a model meso-compound. Thereby, the method was proved to be useful in producing a reliable second-generation library of true recombinants from which better performing variants were identified by using a high-throughput electrospray ionization mass spectrometry (ESI-MS) screening system.

Amino Acid Sequence↗

PubMed2005

Alginate acetylation influences initial surface colonization by mucoid Pseudomonas aeruginosa.

Mucoid strains of Pseudomonas aeruginosa overproduce the exopolysaccharide alginate, which is substituted with O-acetyl groups. Under non-growing conditions in phosphate buffer, a mucoid clinical strain formed microcolonies on steel surfaces, while an acetylation-defective mutant was unable to form cell clusters. Enzymatic degradation of alginate by alginate lyase prevented microcolony formation of the mucoid parent strain. In a continuous-culture flow-cell system, using gluconate minimal medium, the mucoid strain with acetylated alginate formed microcolonies and grew into heterogenous biofilms, whereas the acetylation-defective mutant produced a thinner and more homogeneous biofilm. A lowered viscosity of extracellular material from the acetylation-defective mutant indicated a weakening of exopolymer interactions by loss of acetyl groups. These results suggest that acetyl substituents are necessary for the function of high-molecular-mass alginate to mediate cell aggregation into microcolonies in the early stages of biofilm development by mucoid P. aeruginosa, thereby determining the architecture of the mature biofilm.

Acetylation↗

PubMed2005

Pseudomonas aeruginosa lectin LecB is located in the outer membrane and is involved in biofilm formation.

Pseudomonas aeruginosa is an opportunistic pathogen which causes a variety of diseases, including respiratory tract infections in patients suffering from cystic fibrosis. Therapeutic treatment of P. aeruginosa infections is still very difficult because the bacteria exhibit high intrinsic resistance against a variety of different antibiotics and, in addition, form stable biofilms, e.g. in the human lung. Several virulence factors are produced by P. aeruginosa, among them the two lectins LecA and LecB, which exert different cytotoxic effects on respiratory epithelial cells and presumably facilitate bacterial adhesion to the airway mucosa. Here, the physiology has been studied of the lectin LecB, which binds specifically to L-fucose. A LecB-deficient P. aeruginosa mutant was shown to be impaired in biofilm formation when compared with the wild-type strain, suggesting an important role for LecB in this process. This result prompted an investigation of the subcellular localization of LecB by cell fractionation and subsequent immunoblotting. The results show that LecB is abundantly present in the bacterial outer-membrane fraction. It is further demonstrated that LecB could be released specifically by treatment of the outer-membrane fraction with p-nitrophenyl alpha-L-fucose, whereas treatment with D-galactose had no effect. In contrast, a LecB protein carrying the mutation D104A, which results in a defective sugar-binding site, was no longer detectable in the membrane fraction, suggesting that LecB binds to specific carbohydrate ligands located at the bacterial cell surface. Staining of biofilm cells using fluorescently labelled LecB confirmed the presence of these ligands.

Bacterial Outer Membrane Proteins↗

PubMed2005

Pseudomonas aeruginosa lectins I and II and their interaction with human airway cilia.

The bacterium Pseudomonas aeruginosa (PA) produces two carbohydrate binding lectins, designated PA lectin-I and lectin-II (PA-IL, PA-IIL). Both lectins are used by the bacterium to adhere to the glycocalyx of mammalian cells. In addition, the lectins immobilize ciliary beat. The kinetics of ciliary beat inhibition by each individual lectin have been analysed; however, their joint action on cilia has not been reported. Here we demonstrate that PA-IL and PA-IIL inhibit ciliary beat in a similar time-dependent manner. If applied simultaneously, ciliary beat inhibition after five hours of incubation was weaker than if each lectin was applied separately. Thus it can be hypothesized that the lectins compete for the same binding site(s) of the glycocalyx. Sugar inhibition experiments demonstrate that D-galactose and L-fucose inhibit both lectins, although clear preferences of D-galactose for PA-IL and of L-fucose for PA-IIL exist. These interactions have to be kept in mind when designing sugar-based therapies.

Adhesins, Bacterial↗

PubMed2004

Learning from directed evolution: theoretical investigations into cooperative mutations in lipase enantioselectivity.

Molecular modeling with classical force-fields has been used to study the reactant complex and the tetrahedral intermediate in lipase-catalyzed ester hydrolysis in 20 enzyme/substrate combinations. The R and S enantiomers of alpha-methyldecanoic acid ester served as substrates for the wild-type lipase from Pseudomonas aeruginosa and nine selected mutants. After suitable preparation of initial structures from an available wild-type crystal structure, each system was subjected to 1 ns CHARMM force-field molecular dynamics simulations. The resulting geometric and energetic changes allow interpretation of some experimentally observed effects of mutations, particularly with regard to the "hot spots" at residues 155 and 162. The replacement S155F enhances S enantiopreference through a steric relay involving Leu162. The double mutation S53P + L162G improves S enantioselectivity by creating a new binding pocket for the S enantiomer with an additional stabilizing hydrogen bond to His83. The simulations provide insight into remote and cooperative effects of mutations.

Catalysis↗

PubMed2004

Lipase-specific foldases.

Lipases represent the most important class of enzymes used in biotechnology. Many bacteria produce and secrete lipases but the enzymes originating from Pseudomonas and Burkholderia species seem to be particularly useful for a wide variety of different biocatalytic applications. These enzymes are usually encoded in an operon together with a second gene which codes for a lipase-specific foldase, Lif, which is necessary to obtain enzymatically active lipase. A detailed analysis based on amino acid homology has suggested the classification of Lif proteins into four different families and also revealed the presence of a conserved motif, Rx1x2FDY(F/C)L(S/T)A. Recent experimental evidence suggests that Lifs are so-called steric chaperones, which exert their physiological function by lowering energetic barriers during the folding of their cognate lipases, thereby providing essential steric information needed to fold lipases into their enzymatically active conformation.

Amino Acid Sequence↗

PubMed2004

Prospecting for biocatalysts and drugs in the genomes of non-cultured microorganisms.

Modern biotechnology has a steadily increasing demand for vitamins, antibiotics and, in particular, novel biocatalysts for use in the production of flavors, agrochemicals, pharmaceuticals and high-value fine chemicals. Novel experimental approaches are being developed in attempts to identify such molecules. However, it is known that up to 99.8% of the microbes present in many environments are not readily culturable; hence, they cannot be exploited for biotechnology. The 'metagenome technology' offers a solution to this problem by developing culture-independent methods to isolate, clone and express environmental DNA. So far, metagenome-based approaches have led to the isolation of many novel biocatalysts and a variety of other molecules with a high potential for downstream applications.

Catalysis↗

PubMed2004

Enantioselective biocatalysis optimized by directed evolution.

Directed evolution methods are now widely used for the optimization of diverse enzyme properties, which include biotechnologically relevant characteristics like stability, regioselectivity and, in particular, enantioselectivity. In principle, three different approaches are followed to optimize enantioselective reactions: the development of whole-cell biocatalysts through the creation of designer organisms; the optimization of enzymes with existing enantioselectivity for process conditions; and the evolution of novel enantioselective biocatalysts starting from non-selective wild-type enzymes.

Algorithms↗