Biomedical subjects

Kathryn E Uhrich

Publications and source records attributed to Kathryn E Uhrich.

13 recordsLinked to original sources

PubMed2006

Novel amphiphilic macromolecules and their in vitro characterization as stabilized micellar drug delivery systems.

A series of amphiphilic macromolecules, amphiphilic scorpion-like macromolecules (AScMs) and amphiphilic star-like macromolecules (ASMs), were evaluated as potential drug delivery systems for intravenous administration. AScMs aggregate to form polymeric micelles; whereas the ASMs have a covalently bound core structure and behave as unimolecular micelles. Four structurally different AScMs and two ASMs were selected for further evaluation focusing on micellar stability and biocompatibility. AScMs were determined to have extremely low cmc values, indicating excellent thermodynamic stability compared to other polymeric micelle systems. Particle sizes of the AScM polymeric micelles and ASM unimolecular micelles were between 10 and 20 nm, and remained constant for up to 3 weeks storages as aqueous solutions at room temperature (approximately 23 degrees C) and 37 degrees C. The dissociation kinetics of the AScM polymeric micelles were slowed relative to small molecule surfactant micelles, again indicating enhanced kinetic stability. With respect to hemolytic activity, AScMs with longer acyl chains were hemolytic; whereas the ASMs had minimal hemolytic activity due to the covalently bound structure. Both ASM unimolecular micelles and AScM polymeric micelles have excellent micellar stability, but the ASMs are more suitable as injectable drug delivery systems due to their low hemolytic activity.

Animals↗

PubMed2006

Nanoscale anionic macromolecules can inhibit cellular uptake of differentially oxidized LDL.

Nanoscale particles could be synthetically designed to potentially intervene in lipoprotein matrix retention and lipoprotein uptake in cells, processes central to atherosclerosis. We recently reported on lipoprotein interactions of nanoscale micelles self-assembled from amphiphilic scorpion-like macromolecules based on a lauryl chloride-mucic acid hydrophobic backbone and poly(ethylene glycol) shell. These micelles can be engineered to present varying levels of anionic chemistry, a key mechanism to induce differential retentivity of low-density lipoproteins (LDL) (Chnari, E.; Lari, H. B.; Tian, L.; Uhrich, K. E.; Moghe, P. V. Biomaterials 2005, 26, 3749). In this study, we examined the cellular interactions and the ability of carboxylate-terminated nanoparticles to modulate cellular uptake of differentially oxidized LDL. The nanoparticles were found to be highly biocompatible with cultured IC21 macrophages at all concentrations examined. When the nanoparticles as well as LDL were incubated with the cells over 24 h, a marked reduction in cellular uptake of LDL was observed in a nanoparticle concentration-dependent manner. Intermediate concentrations of nanoparticles (10(-6) M) elicited the most charge-specific reduction in uptake, as indicated by the difference in uptake due to anionic and uncharged nanoparticles. At these concentrations, anionic nanoparticles reduced LDL uptake for all degrees of oxidation (no oxidation, mild, high) of LDL, albeit with qualitative differences in the effects. The anionic nanoparticles were particularly effective at reducing the very high levels of uptake of the most oxidized level of LDL. Since complexation of LDL with anionic nanoparticles is reduced at higher degrees of LDL oxidation, our results suggest that anionic nanoparticles interfere in highly oxidized (hox) LDL uptake, likely by targeting cellular/receptor uptake mechanism, but control unoxidized LDL uptake by mechanisms related to direct LDL-nanoparticle complexation. Thus, anionically functionalized nanoparticles can modulate the otherwise unregulated internalization of differentially oxidized LDL.

Animals↗

PubMed2006

Engineered polymeric nanoparticles for receptor-targeted blockage of oxidized low density lipoprotein uptake and atherogenesis in macrophages.

Strategies to prevent the uptake of modified low density lipoproteins (LDLs) by immune cells, a major trigger of inflammation and atherogenesis, are challenged by complex interfacial factors governing LDL receptor-mediated uptake. We examine a new approach based on a family of "nanoblockers", which are designed to examine the role of size, charge presentation, and architecture on inhibition of highly oxidized LDL (hoxLDL) uptake in macrophages. The nanoblockers are macromolecules containing mucic acid, lauryl chloride, and poly(ethylene glycol) that self-assemble into 15-20 nm nanoparticles. We report that the micellar configuration of the macromolecules and the combined display of anionic (carboxylate) groups in the hydrophobic region of the nanoblockers caused the most effective inhibition in the uptake of hoxLDL by IC21 macrophages. The nanoblockers primarily targeted SR-A and CD36, the major scavenger receptors and modulated the "atherogenic" phenotype of cells in terms of the degree of cytokine secretion, accumulation of cholesterol, and "foam cell" formation. These studies highlight the promise of synthetically engineered nanoblockers against oxidized LDL uptake.

Arteriosclerosis↗

PubMed2006

Characterization and in vitro degradation of salicylate-derived poly(anhydride-ester microspheres).

The aim of this study was to investigate how glass transition temperature (Tg) influenced polymer microsphere formation and degradation of three chemically, similar novel salicylatebased poly(anhydride-esters): poly[1,6-bis(o-carboxyphenoxy)hexanoate] (CPH), Tg = 59 degrees C; poly[1,8-bis(o-carboxyphenoxy)octanoate] (CPO), Tg = 30 degrees C; and poly[1,10-bis(ocarboxyphenoxy) decanoate] (CPD), Tg = 27 degrees C. Microspheres of these polymers were prepared using a modified oil-in-water solvent evaporation method and processed by either resuspension or washed by centrifugation. The morphology of the microspheres determined by scanning electron microscopy (SEM) revealed that an extra washing step appears to increase aggregation as the Tg decreases; whereas only limited aggregation occurred in the polymer with the lowest Tg, CPD, in those not washed by centrifugation. Residual polyvinyl alcohol apparently affected the drug release rates from the microspheres by a stabilization process that produced an 8 h lag time and a 5% decrease in the amount of drug released over a 7 day period compared to microspheres washed free of PVA. These results demonstrate that salicylate-based poly(anhydride-esters) with sufficiently high Tgs, can be processed into microspheres that release salicylate over a time period amenable for drug delivery applications.

Anhydrides↗

PubMed2005

Microscale plasma-initiated patterning (muPIP).

A novel technique to create biomolecular micropatterns of varying complexity on several types of polymer substrates is presented. This method uses a patterned PDMS stamp to preferentially expose or protect areas of an underlying polymer substrate from oxygen plasma. Following plasma treatment, the substrate is immersed in a biomolecular ink, whereby molecules preferentially adsorb to either the plasma-exposed or plasma-protected substrate regions, depending on the particular substrate/ink combination. Using this method, polyethylene (PE), polystyrene (PS), poly(methyl methacrylate) (PMMA), poly(dimethylsiloxane) (PDMS), and poly(hydroxybutyrate/hydroxyvalerate) (PHBV) were micropatterned with different aqueous-based biomolecular inks (i.e., goat anti-rabbit immunoglobulin G, poly-l-lysine, and bovine serum albumin (BSA)). Water contact angle measurements performed on substrates after oxygen plasma exposure showed that the hydrophilicity of substrate areas exposed to plasma was significantly greater than that of areas protected from plasma by the PDMS stamp. In addition, scanning electron microscopy results demonstrated that substrate areas exposed to plasma were physically modified (e.g., roughened) compared to adjacent, protected areas. Areas in contact with a patterned PDMS stamp during plasma exposure were found to be physically unaffected by plasma treatment, and exhibited spatial features/dimensions consistent with the corresponding features of the patterned stamp. Last, protein patterns of BSA on the polymer substrates were stable and distinct after 4 weeks of incubation at 37 degrees C.

Microscopy, Electron, Scanning↗

PubMed2005

Oxygen plasma-treatment effects on Si transfer.

Oxygen plasma-treatment is commonly used to increase the hydrophilicity of poly(dimethylsiloxane) (PDMS) stamps used for microcontact printing (muCP) aqueous-based inks. Review of the literature reveals that a wide range of plasma parameters are currently employed to modify stamp surfaces. However, little is known about the effect of these parameters (e.g., power, chamber pressure, duration) on the undesirable transfer of low-molecular-weight silicon-containing fragments from the stamps that commonly occurs during muCP. To study the effect of oxygen plasma-treatment on Si transfer, unpatterned PDMS stamps were treated with oxygen plasma under various conditions and used to stamp deionized water on plasma-activated poly(methyl methacrylate) (PMMA) substrates. Once stamped, the PMMA substrates were analyzed with X-ray photoelectron spectroscopy (XPS) to quantify and characterize silicon present on the substrate surface. In addition, used PDMS stamps were analyzed with scanning electron microscopy (SEM) to observe topographical changes that occur during oxygen plasma-treatment. XPS results show that all plasma treatments studied significantly reduced the amount of Si transfer from the treated stamps during muCP as compared to untreated PDMS stamps and that the source of transfer is residual PDMS fragments not removed by oxygen plasma. SEM results show that, although the treated stamps undergo a variety of topographical changes, no correlation exists between stamp topography and extent of Si transfer from the stamps.

Microscopy, Electron, Scanning↗

PubMed2005

Salicylic acid-derived poly(anhydride-esters) inhibit bone resorption and formation in vivo.

The objective of this study was to investigate the effects of a novel polymer that biodegrades into salicylic acid (SA) on the healing of critical sized long bone defects. Microspheres of the homopolymer, or a copolymer containing 50% less of the SA, were packed into 5-mm mid-diaphyseal defects in rat femurs. Control animals received collagen sponge implants. After 4 and 8 weeks of implantation, bone healing was evaluated using microradiography and quantitative histomorphometry. Four weeks postsurgery, significantly less new bone was formed in both of the polymer groups (p<0.038). Reduced bone loss was also noted with the polymers at this time, although it was not statistically significant. However, at 8 weeks postsurgery, a statistically significant reduction in bone loss was observed in both of the polymer groups compared with controls (p<0.0072). Both polymers seemed to elicit identical tissue responses because there were no differences detected between the homopolymer and copolymer materials at either time point. These results indicate that locally released SA can significantly reduce both bone loss and bone formation in this animal model.

Anhydrides↗

PubMed2005

Polymeric micelles based on amphiphilic scorpion-like macromolecules: novel carriers for water-insoluble drugs.

PURPOSE: The objective was to evaluate amphiphilic scorpion-like macromolecules (AScMs) as drug carriers for hydrophobic drugs. METHODS: Indomethacin (IMC) was incorporated into two AScM micelles (M12P5 and M12P2) by the O/W emulsion technique. The influences of IMC:polymer feed ratio and molecular weight of the hydrophilic block of AScMs on the micelle size, IMC entrapment efficiency and release behavior were investigated. Furthermore, cytotoxicity of the AScMs was evaluated with human umbilical vein endothelial cells (HUVEC). RESULTS: The maximal IMC entrapment efficiency in M12P5 and M12P2 micelles (72.3 and 20.2%, respectively) was obtained at ratios of 0.1 to 1 for indomethacin:polymer. The sizes of IMC-loaded M12P5 and Mi2P2 polymeric micelles were <20 nm with a narrow size distribution. In vitro release studies revealed that IMC released from MI2P5 and M12P2 polymeric micelles showed sustained release behavior during the 24 h of experiment. Additionally, M12P5 and M12P2 polymeric micelles did not induce remarkable cytotoxicity against HUVEC cells at concentrations up to 1 and 0.5 mM, respectively. CONCLUSION: The amphiphilic scorpion-like macromolecules may be useful as novel drug carriers because of their small size, ability to encapsulate hydrophobic drugs and release them in a sustained manner as well as low cytotoxicity.

Cell Line↗

PubMed2005

Micropatterned polymer substrates control alignment of proliferating Schwann cells to direct neuronal regeneration.

Microcontact printed polymeric substrates were evaluated for their ability to control Schwann cell attachment and direct proliferation, as Schwann cell guidance is a crucial factor in directing peripheral nerve regeneration. Elastomeric stamps of poly(dimethylsiloxane) were "inked" with laminin, a permissive protein for Schwann cell adhesion, and stamped onto poly(methyl methacrylate) substrates to create patterns of lines and intervals varying from 10 to 50 microm wide. Schwann cells were seeded onto the substrates in serum-free media. After 4h, media was replaced with serum-containing growth media and changed daily thereafter. The addition of growth media to stimulate proliferation initially caused some loss in cell orientation relative to the laminin pattern, but when monolayer formation was complete, a high degree of cell orientation was observed. As both cell-cell contacts and surface coverage were maximized, the Schwann cells achieved an even higher order of orientation than observed during the early stages of proliferation. Significantly, smaller pattern widths increased the degree of orientation, regardless of interval width. Our results indicate that patterned polymeric substrates may enhance peripheral nerve regeneration by creating a highly ordered Schwann cell matrix for guidance of neurons.

Adsorption↗

PubMed2005

Nanoscale anionic macromolecules for selective retention of low-density lipoproteins.

Synthetically designed anionic nanocarriers that mimic the charge properties of glycosaminoglycans can potentially sequester low-density lipoproteins (LDL) during the treatment of atherosclerosis. In this study, we explore the LDL retentivity of 15-20 nm anionic micelles formed from amphiphilic scorpion-like macromolecules (AScMs) as building blocks. The macromolecules comprise four aliphatic chains attached to mucic acid and a linear polyethylene glycol (PEG) segment to form micellar nanocarriers with a hydrophobic core and hydrophilic corona. Dynamic light scattering and transmission electron microscopy studies indicate that the carboxylate-terminated nanocarriers (20 nm) sequester LDL (22 nm), resulting in complexes with a diameter of 60-90 nm, but neutral ethoxy-terminated nanocarriers do not retain LDL. Further, carboxylate-terminated nanocarriers consistently bound to unoxidized LDL (Relative Electrophoretic Mobility, REM=1.0) and mildly oxidized LDL (REM=1.5), but not highly oxidized LDL (REM=3.6), whereas the neutral nanocarriers displayed no preference/affinity at all, indicating that the nanocarrier-LDL binding is charge-dependent. The binding affinity of unoxidized LDL for differentially charged nanocarriers, formed from varying ratios of carboxylate- and ethoxy-terminated macromolecules, was quantified. The 100% carboxylated nanocarriers elicited the highest binding affinity (K(d)=567 nm), whereas mixed micelles elicited significantly lower levels of binding affinity. Our results highlight the promise of synthetically designed nanomaterials in lipoprotein retention, a key step in managing the escalation of atherosclerosis.

Anions↗

PubMed2003

Amphiphilic star-like macromolecules as novel carriers for topical delivery of nonsteroidal anti-inflammatory drugs.

The objective of this study was to evaluate amphiphilic star-like macromolecules (ASMs) as a topical drug delivery system. Indomethacin, piroxicam, and ketoprofen were individually encapsulated into the ASMs using coprecipitation. The effects of the ASMs on percutaneous permeation of nonsteroidal anti-inflammatory drugs (NSAIDs) across full thickness, hairless mouse skin were evaluated in vitro using modified Franz diffusion cells. In addition, solubility and in vitro release experiments were performed to characterize ASMs behavior in aqueous media. Poly(ethylene glycol) (PEG) and Pluronic P-85 were used as polymer controls to compare the role of PEG and amphiphilic behavior in the ASMs. In vitro release experiments indicated that ASMs can delay drug release (P <.05), whereas solubility measurements showed that ASMs can increase NSAIDs aqueous solubility (P <.05). Percutaneous permeation studies revealed that ASMs decreased both flux and Q24 of drugs compared with the control (P <.10). Skin pretreatment studies with ASM-containing solution before drug application demonstrated that pretreatment similarly influenced NSAID percutaneous permeation. In conclusion, ASMs likely slow drug permeation through 2 mechanisms, delayed drug diffusion from its core and skin dehydration by its shell. Thus, ASMs may be useful for delayed dermal delivery or prevention of compound permeation through the skin (eg, sunscreens, N,N-diethyl-m-toluamide [DEET]) from aqueous formulations.

Administration, Topical↗

PubMed2002

Effects of in vitro degradation on properties of poly(DL-lactide-co-glycolide) pertinent to its biological performance.

Poly(DL-lactide-co-glycolide) (PLGA) is a widely used biodegradable polymer. In this study, effects of in vitro degradation on its dynamic mechanical properties, thermal behavior, molecular weight, fluid uptake and dimension stability were investigated. The in vitro experiment was conducted at 37 degrees C in phosphate buffer solution with pH=7.4 in a dynamic incubator. The dynamic mechanical experiments were performed on rectangular specimens under three point bending. For an aging period of 6 weeks, the dynamic mechanical properties were found to decrease significantly with the increased time. The absorbed fluid had a significant effect on polymer storage modulus. The molecular weight decreased with aging time, and was found to be different at the center and the surface, being higher at the center in the beginning and lower thereafter. The polydispersity did not change significantly with degradation. The fluid uptake and specimen geometric dimension increased proportionally with aging time. The glass transition and thermal decomposition temperatures decreased with the increased degradation time.

Journal Article↗

PubMedDate not supplied

Synthesis and cytotoxicity of salicylate-based poly(anhydride esters).

This paper describes the synthesis and cytotoxicity of poly(anhydride esters) that are composed of several salicylate derivatives, including halogenated salicylates, aminosalicylates, salicylsalicylic acid, and thiolsalicylic acid. The incorporation of these nonsteroidal antiinflammatory drugs (NSAIDs) into a biodegradable polymer backbone yields drug-based polymers that have potential for a variety of applications. The poly(anhydride esters) were synthesized by melt condensation polymerization. The halogenated salicylate derivatives yielded the highest molecular polymers as well as the highest glass transition temperatures. All polymers displayed in vitro degradation lag times from 1 to 3 days, depending on the water solubility of the salicylate derivative. Cell viability and proliferation were determined with L929 fibroblast cells in serum-containing medium to assess the polymer cytotoxicities, which varied as a function of the saliyclate chemistry. Cell morphology was normal for most of the polymers evaluated.

Animals↗