PubMed Health⌕ Search

Biomedical subjects

M Kaga

Publications and source records attributed to M Kaga.

At least 19 recordsLinked to original sources
PubMed2006

Shrinkage dynamics of a vesicle in surfactant solutions.

We develop a theory for shrinkage dynamics of a vesicle interacting with surfactant molecules. A stepwise shrinkage is formulated in such a way that it consists of two processes. One is a nucleation process of a pore under increasing of the membrane tension. The other is a closure process of the pore due to the line tension of the pore edge after leakage of the inner fluid. We carry out numerical simulations and show that the results agree with experiments semi-quantitatively. An analytical study is also carried out to understand the periodic shrinkage.

Computer Simulation↗
PubMed2006

Endoscopic in vivo evaluation of tissue atypia in the esophagus using a newly designed integrated endocytoscope: a pilot trial.

BACKGROUND AND STUDY AIMS: A newly designed magnifying endoscope featuring an endocytoscopy function provided by ultrahigh magnification was evaluated in a pilot study in patients with various types of benign and malignant pathology in the esophagus. PATIENTS AND METHODS: Seventy-five consecutive patients were included in the study from 15 March to 21 December 2005. Twenty-nine patients with specific esophageal lesions that had been detected by regular or narrow-band imaging, or both, were further evaluated using endocytoscopy, followed by tissue biopsy or resection. During the endocytoscopic examinations, the esophageal mucosa was stained with 0.5 % methylene blue. The endocytoscopic findings were graded from 1 to 5 in an endocytoscopic atypia (ECA) classification. The final histopathological diagnoses based on biopsies or resected specimens were as follows: category 1 in the Vienna classification, n = 4; category 2, n = 6; category 3, n = 1; category 4, n = 10; and category 5, n = 7. The endocytoscopic diagnoses were compared with the histopathological diagnoses. RESULTS: Clear endocytoscopic images were obtained in all cases. In definitely malignant lesions, the cell nuclei had an enlarged and irregularly arranged appearance (grade ECA 5). The positive predictive value for malignancy (grades ECA 4 and 5) was 94 %; the false-negative rate was 16.7 %, and the false-positive rate was 6.3 %. The overall accuracy of endocytoscopy for differentiating between nonmalignant tissue (categories 1 - 3 in the Vienna classification) and malignant tissue (categories 4 and 5) was 82 %. CONCLUSIONS: These preliminary results suggest that incorporating endocytoscopy facilities into a standard endoscope may be helpful in characterizing tissue in a variety of esophageal lesions. The potential clinical impact of this method in relation to other gastrointestinal organs requires further study.

Carcinoma, Squamous Cell↗
PubMed2006

Contraction stress in dentin adhesives bonded to dentin.

Adhesives cured under constrained conditions develop contraction stresses. We hypothesized that, with dentin as a bonding substrate, the stress would reach a maximum, followed by a continuous decline. Stress development was determined with a tensilometer for two total-etch systems and two systems with self-etching primers. The adhesives were placed in a thin layer between a glass plate and a flat dentin surface pretreated with phosphoric acid or self-etching primer. After an initial maximum shortly after light-curing, the stress decreased dramatically for the total-etch systems (70%) and, to a lesser extent, for the adhesives with self-etching primers (30%). The greater stress decrease for the total-etch systems was ascribed to water and/or solvents released into the adhesives from the fully opened dentinal tubules by the pulling/sucking action of the contraction stress. This happened less with the adhesives with self-etching primers, where the tubules remained mainly closed.

Analysis of Variance↗
PubMed2005

Dental adhesive compounds alter glutathione levels but not glutathione redox balance in human THP-1 monocytic cells.

The use of hydrophilic dental monomers in dentin bonding agents has vastly improved resin-dentin bond strengths, but incomplete polymerization of these monomers and their leaching into adjacent (pulpal) oral tissues has raised concerns about their biocompatibility. The sublethal effects of these resins are virtually unknown, but their electrophilic nature led to the hypothesis that they may alter cellular oxidative stress pathways. Glutathione balance between reduced (GSH) and oxidized (GSSG) is a major mechanism by which cells maintain redox balance and was therefore the focus of the current investigation. THP-1 human monocytic cells were exposed to hydroxyethyl methacrylate (HEMA), benzoyl peroxide (BPO), camphorquinone (CQ), or triethyelene glycol dimethacrylate (TEGDMA) for 24 h at sublethal doses, then GSH and GSSG levels were measured by means of Ellman's method adapted for cell culture. The results indicate that these dental resin compounds act at least partly via oxidative stress by increasing GSH levels at sublethal concentrations. However, the GSH-GSSG ratio was relatively unaffected. Only BPO altered the GSH-GSSG ratio at 24 h, again at sublethal levels (7.5-15 micromol/L). The results support the hypothesis that resin monomers act, at least in part, via oxidative stress, and that oxidative-stress pathways should be one focus of future investigations of monomer biocompatibility.

Buthionine Sulfoximine↗
PubMed2004

In vitro effect of nanoleakage expression on resin-dentin bond strengths analyzed by microtensile bond test, SEM/EDX and TEM.

This study evaluated the effect of multiple consecutive adhesive resin coatings of adhesive bonded to human dentin on nanoleakage and resin-dentin bond strength. Resin bonded dentin specimens were prepared using a total-etch adhesive (One-Step Plus) applied as multiple consecutive coating, or using two self-etch adhesive systems (iBond or Fluoro Bond). For the total-etch adhesive, resin application and air evaporation were performed 1, 2, 3, or 4 times. The self-etch adhesives were applied according to manufacturers' instructions. Resin-dentin bonded beams were prepared and immersed in water (control) or ammoniacal silver nitrate. After storage, microtensile bond strengths were measured. The fractured surfaces were examined by scanning and transmission electron microscopy (SEM and TEM), and energy-dispersive X-ray spectrometry (EDX). No significant differences in bond strength were found between water and silver nitrate storage groups. Several types of silver depositions (spotted, reticular, or water trees) were found in adhesive joints. The bond strengths of the single coated specimens of the total-etch adhesive were significantly lower than those receiving 2-4 coatings. Single coats produced more nanoleakage than multiple coats. However, no correlation was found between the bond strengths and nanoleakage between the different adhesives (total-etch adhesive with different conditions or self-etch adhesives).

Acid Etching, Dental↗
PubMed2004

Fluid movement across the resin-dentin interface during and after bonding.

This study evaluated the extent of water penetration through resin-dentin interfaces before and after being sealed with adhesives. Four adhesive resin systems (2 total-etch adhesives and 2 self-etching primer adhesives) were used in this study. Dentin disks were placed in a split-chamber device, and in situ fluid movement across dentin was measured, with and without physiological pressure, during bonding procedures or 24 hrs after bonding. The fluid movement across dentin occurs via dentin tubules after acid-etching. Large outward or inward fluid shifts across dentin were observed during air-drying and light-curing for resin application. The amount of fluid movement across resin-bonded dentin when total-etch adhesives were used was significantly greater than that with self-etching adhesives. The milder acid-etching effects of self-etching primers may retain hybridized smear plugs within the tubules that reduce outward fluid flow, resulting in superior dentin sealing.

Acid Etching, Dental↗
PubMed2003

Degradation of resin-dentin bonds using NaOCl storage.

OBJECTIVE: Several recent studies have reported collagen hydrolysis within bonds over the long-term. This may be one reason for the degradation of the bonds. This study therefore aimed to determine the effects of NaOCl on adhesive system bonds (total-etch bonding system vs. self-etching primer system) to dentin in order to accelerate the durability testing. METHODS: Resin-dentin bonded specimens were produced using Liner Bond 2V (Kuraray), a self-etching primer system, and OptiBond SOLO (Kerr), a total-etch bonding system, according to the manufacturers' instructions. The bonded specimens were serially sectioned in both x and y directions across the adhesive interface to obtain beams (adhesive area: 0.9 mm(2)). The specimens were immersed in 10% NaOCl solution for 1-5h after being stored in water at 37 degrees C for 24h. Control specimens were tested without exposure to NaOCl. After storage, micro-tensile bond tests were performed. Results were analyzed by two-way ANOVA and Fisher's PLSD tests (p<0.05). All fractured surfaces were observed by SEM, and examined using an image analyzer. RESULTS: The bond strengths decreased with increasing storage time in NaOCl. Fractography showed that NaOCl had a greater effect on the bond structure of OptiBond SOLO than on that of Liner Bond 2V, although both adhesives were susceptible. SIGNIFICANCE: Deterioration of the bonds was responsible for the effect of NaOCl on the hybrid layer. This deterioration may occur in humans in cases of deproteinization within the bonds.

Acid Etching, Dental↗
PubMed2002

Low-dose, long-term exposures of dental material components alter human monocyte metabolism.

The short-term degradation of dental polymers and alloys in biological environments has been well documented, but recent evidence indicates that oral tissues may be chronically exposed to low levels of these released components. The effect of these chronic exposures on the ability of cells to respond to a subsequent challenge is not known. To investigate this idea, we exposed human THP-1 monocytes to sublethal concentrations of HEMA, TEGDMA, Hg(2+), and Ni(2+) for 2 weeks and then assessed the monocytic response to subsequent 24-h challenge with the same components at higher concentrations. Chronic (2 week) exposures of monocytes to HEMA and both metal ions significantly altered monocyte response to short-term (24 h) secondary exposures, even when overt effects of the chronic exposures were not apparent. However, cellular responses were highly variable depending on the material and its concentrations. For TEGDMA, no effects were seen. These results demonstrate that the chronic effects of materials must be considered even when the chronic exposure has no initial overt effect. The effect on cells may only be apparent if the cell is challenged by a secondary exposure.

Cells, Cultured↗
PubMed2002

Fractured surface characterization: wet versus dry bonding.

OBJECTIVE: Fractographic analysis was conducted to evaluate the resin-dentin bond structures made under wet and dry conditions. METHODS: Resin-dentin bonded specimens were prepared using two adhesive resin systems (Single Bond/SB; 3M and All Bond 2/AB2; Bisco Inc) under wet and dry conditions. The specimens were sectioned perpendicular to the adhesive interface to produce a square bar-shaped specimen (adhesive area: 0.9 mm(2)) by means of a diamond saw. The mean bond tensile test was then conducted at a crosshead speed of 1.0 mm/min. The mean bond strengths were statistically compared with two-way ANOVA and Fisher's PLSD test (p<0.05). Subsequently, the fractured surfaces of all specimens were examined using SEM and the area fractions of failure modes (%) were measured using an image analyzer on SEM microphotographs. RESULTS: No significant differences in tensile-bond strength were observed between SB (60.1+/-16.4MPa) and AB2 (69.8+/-17.4MPa) (p>0.05) under wet conditions. However, the bond strength either of SB or AB2 made under wet conditions was significantly greater than those made under dry conditions (SB: 26.2+/-12.5MPa and AB2: 6.8+/-3.3MPa) (p<0.05). Under fractographic analysis, the major portion at the fractured surface was occupied by the cohesive failure of bonding resin and the resin composite for the wet conditions, and the top of the hybrid layer for the dry conditions in both systems. SIGNIFICANCE: The interaction between the top of the hybrid layer and the bonding resin influenced the bond integrity.

Adhesiveness↗
PubMed2002

Delayed eruption of premolars with periodontitis of primary predecessors and a cystic lesion: a case report.

Apical periodontitis after pulp therapy in a primary tooth can cause delayed eruption of the permanent successor. A case of bilateral delayed eruption of mandibular premolars is presented. The patient. a 13-year-old girl, was referred by her dentist. Oral findings showed that the right first and left second primary molars were retained. Other premolars had erupted. An orthopantomogram revealed apical periodontitis, affecting both retained primary molars. The right first mandibular premolar was impacted against the alveolar bone and root of the second premolar, and there was a large cystic lesion in close association with the left second mandibular premolar. Both primary molars were extracted, and the cystic lesion was treated by marsupialization. Fenestration and traction were performed on the right first premolar. Correct tooth alignment was achieved with orthodontic appliances. If the problem had been detected earlier, treatment of the premolars might have been easier. Clinical and radiological follow-up, therefore, of primary teeth that have undergone pulp therapy procedures should be performed until eruption of succedaneous teeth.

Adolescent↗
PubMed2002

The extent to which resin can infiltrate dentin by acetone-based adhesives.

The combined methodologies of fractography and laser-Raman spectroscopic analysis were used for evaluation of the resin-dentin bonds made with wet and dry bonding. Resin-dentin-bonded beams were produced by means of 2 acetone-based adhesives (One-Step and Prime & Bond NT). The micro-tensile bond test was conducted, and the fractured surfaces of all specimens were examined by SEM and an image analyzer. The amount of resin infiltration within the hybrid layer was quantified by means of a laser-Raman spectroscope. In Raman analysis, the amount of resin impregnation within the hybrid layer of the dry bonding was found to be significantly lower (approximately 50%) than that in the wet one. Under fractographic analysis, a correlation was found between the bond strength and the failure mode. Based on those findings, it was suggested that the integrity between the bonding resin and the top of the hybrid layer played a major role in bond strength.

Acetone↗
PubMed2002

Components of dentinal adhesives modulate heat shock protein 72 expression in heat-stressed THP-1 human monocytes at sublethal concentrations.

Few studies have investigated the ability of dental resins to induce cellular stress at sublethal concentrations. Cellular stress, especially in immune cells such as monocytes, may modulate the biological response to materials or the host's ability to respond to bacterially mediated inflammation. The current study examined the ability of sublethal concentrations of 2-hydroxylethylmethacrylate (HEMA) and triethyleneglycol dimethacrylate (TEGDMA) to induce heat shock protein 72 (HSP72) in human monocytes. HEMA and TEGDMA significantly suppressed heat-induced HSP72 expression, even at sublethal levels, but did not induce HSP72 by themselves. The results of the current study suggest that components released from dental resin could modulate the HSP stress response without altering cellular metabolic activity.

Analysis of Variance↗
PubMed2001

MaxiK channel-mediated relaxation of guinea-pig aorta following stimulation of IP receptor with beraprost via cyclic AMP-dependent and -independent mechanisms.

The present study was aimed to elucidate the cellular pathway(s) controlling vascular relaxation triggered by stimulation of prostaglandin I2 (PGI2, IP) receptor with a stable PGI2 analog, beraprost. Beraprost caused a concentration-dependent relaxation in de-endothelialized guinea-pig aorta contracted with prostaglandin F2alpha (PGF2alpha). Beraprost-induced relaxation was almost abolished in high-KCl-contracted tissue, indicating a major role of K+ conductances. In contrast to other PGI2 analogs (e.g. cicaprost and iloprost), beraprost-induced relaxation was practically abolished by a selective voltage and Ca2+-activated K+ (MaxiK, BK) channel blocker Iberiotoxin (10(-7) M) or by tetraethylammonium (2 x 10(-3) M). The relaxation induced by beraprost was not significantly affected by other K+ channel blockers glibenclamide (10(-6) M) or Ba2+ (10(-5) M), but was slightly attenuated by 4-aminopyridine (10(-4) M). Beraprost increased intracellular cyclic AMP levels, suggesting a role for cyclic AMP-dependent pathways. A selective inhibitor of cyclic AMP-specific phosphodiesterase, RO-20-1724 (10(-4) M), significantly potentiated beraprost-induced relaxation. Iberiotoxin (10(-7) M) completely counteracted this potentiation. Moreover, tension decrement due to forskolin (3 x 10(-7) M) or 8-bromo-cyclic AMP (10(-2) M) was thoroughly restored by Iberiotoxin (10(-7) M), confirming a role for a cyclic AMP-dependent mechanism. However, SQ 22,536 (10(-4) M), an adenylyl cyclase inhibitor, did not affect beraprost-induced relaxation though it almost totally inhibited the elevation of cyclic AMP contents induced by beraprost, suggesting the existence of an additional mechanism that is cyclic AMP-independent. Moreover, cholera toxin (CTX, 1 microg/ml for 6 h), which activates the stimulatory G protein of adenylyl cyclase (Gs), significantly suppressed PGF2alpha-induced contraction both in the absence and presence of SQ 22,536 (10(-4) M). Iberiotoxin (10(-7) M) was also capable of restoring the relaxation induced by CTX. These findings suggest that MaxiK channel plays a primary role in mediating smooth muscle relaxation following stimulation of IP receptor with beraprost in guinea-pig aorta. Both cyclic AMP-dependent and -independent pathways contribute to the MaxiK channel-mediated relaxation following IP receptor stimulation in this vascular tissue. Direct regulation of MaxiK channels by Gs may partly account for the cyclic AMP-independent relaxant mechanism.

8-Bromo Cyclic Adenosine Monophosphate↗
PubMed2001

Diagnosis of Alexander disease in a Japanese patient by molecular genetic analysis.

Alexander disease is a leukodystrophy that is neuropathologically characterized by the presence of numerous Rosenthal fibers in astrocytes. Recently, mutations in the gene encoding glial fibrillary acidic protein (GFAP) were identified in patients with Alexander disease. We sequenced the GFAP gene of a Japanese girl who presented with typical symptoms of Alexander disease but in whom the diagnosis was not proven by histopathology. We identified a missense mutation, R239C, which is identical to the mutation previously reported to be most frequent. As was the case in previously described patients, our patient was also heterozygous for the de novo mutation. Interestingly, despite the fact that this is a de novo mutation, R239C was found to be common in different ethnic groups, implying that the site is a "hot spot" for mutagenesis. Molecular genetic analysis now makes the antemortem diagnosis of Alexander disease possible.

Brain↗
PubMed2001

The in vitro cytotoxicity of eluates from dentin bonding resins and their effect on tyrosine phosphorylation of L929 cells.

OBJECTIVES: The aim of this study was to examine the relationship between the monomers eluted from dentin-bonding systems and their cytotoxicities, and to investigate the biochemical effect of the monomers on tyrosine phosphorylation, especially relating to the cell growth activity, of L929 cells in vitro. METHODS: The primers, uncured or cured adhesives (3M and Kuraray) were tested to determine the cytotoxicity of confluent L929 cells cultured by Eagle's MEM medium supplemented with 10% FCS. The area of cells affected by the eluted monomers were evaluated with an image analyzer and the concentrations of monomers eluted into the medium were measured with high performance liquid chromatography (HPLC) after 24h incubation. The protein composition of the stimulated cells was compared by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and tyrosine phosphorylation was detected by Western blot. RESULTS: The primer and uncured adhesives revealed variable cytotoxicities. 2-hydroxyethyl-methacrylate (HEMA) was the major component eluted from uncured primers and adhesives. Small amounts of triethylene glycol dimethacrylate (TEGDMA) were also detected from the uncured adhesives. The cytotoxicities of the adhesives decreased as photo activation time increased. The amount of monomers eluted from the cured adhesives was almost undetectable and did not reach a sufficient concentration to suppress cell viability or cell growth. The cytotoxicities of the primers and adhesives correlated well with the amounts of either HEMA or TEGDMA eluted. Moreover, a high concentration of HEMA (4 mg/ml medium) affected intracellular tyrosine phosphorylation, which is related to cellular activities. SIGNIFICANCE: Although the monomers present in dentin bonding resins are cytotoxic to L929 cells, the amount from cured bonding resin is very small and does not provide a cytotoxic dose. This data does however suggest that clinical exposure to the uncured primers and adhesives of dentin bonding resins should be minimized.

Adhesives↗