Biomedical subjects

M P Williamson

Publications and source records attributed to M P Williamson.

At least 19 recordsLinked to original sources

PubMed2005

Genome-wide screening for genetic changes in a matched pair of benign and prostate cancer cell lines using array CGH.

Copy number alterations in a matched pair of benign epithelial and prostate cancer cell lines derived from the same patient were assessed using array-based comparative genomic hybridisation (aCGH). The cancer cell line showed a gain of chromosome 7, deletion of chromosome 8, gains (including high level) and losses on chromosome 11, loss of 18p and gain of 20q. Deletions on chromosome 8 were confirmed with microsatellite markers. The aCGH results were compared to gene expression data obtained using DNA microarrays and suggested the involvement of caspases and ICEBERG on 11q and E2F1 on chromosome 20q.

Cell Line, Tumor↗

PubMed2005

Systems biology: will it work?

Systems biology describes the collection of a set of measurements on a system, integrated with a mathematical model of that system. The model and the measurements must be made together and refined iteratively, requiring close collaboration between biologists and modellers. A complete cell is probably too large and complicated to model yet, but simplified subsystems will probably produce valuable results. I consider various ways of simplifying the system and conclude that the biggest challenge is to get everyone working together productively.

Models, Biological↗

PubMed2001

Clostridium thermocellum Xyn10B carbohydrate-binding module 22-2: the role of conserved amino acids in ligand binding.

The majority of plant cell wall hydrolases are modular enzymes which, in addition to a catalytic module, possess one or more carbohydrate-binding modules (CBMs). These carbohydrate-active enzymes and their constituent modules have been classified into a number of families based upon amino acid sequence similarity. The Clostridium thermocellum xylanase, Xyn10B, contains two CBMs that belong to family 22 (CBM22). The crystal structure of the C-terminal CBM22 (CBM22-2) was determined in a previous study [Charnock, S. J., et al. (2000) Biochemistry 39, 5013--5021] and revealed a surface cleft which presents several conserved residues that are implicated in ligand binding. These amino acids have been substituted and the structure and biochemical properties of the mutants analyzed. The data show that R25A, W53A, Y103A, Y136A, and E138A exhibit greatly reduced affinity for xylotetraose relative to that of the wild-type protein. Conversely, mutations Y103F and Y136F have little effect on ligand binding. Using thermodynamic, X-ray, and NMR measurements on the mutants, we show that the cleft of CBM22-2 does indeed form the ligand-binding site. Trp 53 and Tyr 103 most likely participate in hydrophobic stacking interactions with the ligand, while Glu 138 makes one or more important hydrogen bonds with the tetrasaccharide. Although Arg 25 and Tyr 136 are likely to form hydrogen bonds with the ligand, they are also shown to play a critical role in maintaining the structural integrity of the binding cleft.

Amino Acid Motifs↗

PubMed2001

Role of hydrogen bonding in the interaction between a xylan binding module and xylan.

NMR studies of the internal family 2b carbohydrate binding module (CBM2b-1) of Cellulomonas fimi xylanase 11A have identified six polar residues and two aromatic residues that interact with its target ligand, xylan. To investigate the importance of the various interactions, free energy and enthalpy changes have been measured for the binding of xylan to native and mutant forms of CBM2b-1. The data show that the two aromatic residues, Trp 259 and Trp 291, play a critical role in the binding, and similarly that mutants N264A and T316A have no affinity for the xylose polymer. Interestingly, mutations E257A, Q288A, N292A, E257A/Q288A, E257A/N292A, and E257A/N292A/Q288A do not significantly diminish the affinity of CBM2b-1 for the xylose polymers, but do influence the thermodynamics driving the protein-carbohydrate interactions. These thermodynamic parameters have been interpreted in light of a fresh understanding of enthalpy-entropy compensation and show the following. (1) For proteins whose ligands are bound on an exposed surface, hydrogen bonding confers little specificity or affinity. It also displays little cooperativity. Most specificity and affinity derive from binding between the face of sugar rings and aromatic rings. (2) Loss of hydrogen bonding interactions leads to a redistribution of the remaining bonding interactions such that the entropic mobility of the ligand is maximized, at the expense (if necessary) of enthalpically favorable bonds. (3) Changes in entropy and enthalpy in the binding between polysaccharide and a range of mutants can be interpreted by considering changes in binding and flexibility, without any need to consider solvent reorganization.

Actinomycetales↗

PubMed2001

A nicked duplex decamer DNA with a PEG(6) tether.

A dumbbell double-stranded DNA decamer tethered with a hexaethylene glycol linker moiety (DDSDPEG), with a nick in the centre of one strand, has been synthesised. The standard NMR methods, E.COSY, TOCSY, NOESY and HMQC, were used to measure (1)H, (31)P and T:(1) spectral parameters. Molecular modelling using rMD-simulated annealing was used to compute the structure. Scalar couplings and dipolar contacts show that the molecule adopts a right-handed B-DNA helix in 38 mM phosphate buffer at pH 7. Its high melting temperature confirms the good base stacking and stability of the duplex. This is partly attributed to the presence of the PEG(6) linker at both ends of the duplex that restricts the dynamics of the stem pentamers and thus stabilises the oligonucleotide. The inspection of the global parameters shows that the linker does not distort the B-DNA geometry. The computed structure suggests that the presence of the nick is not disturbing the overall tertiary structure, base pair geometry or duplex base pairing to a substantial extent. The nick has, however, a noticeable impact on the local geometry at the nick site, indicated clearly by NMR analysis and reflected in the conformational parameters of the computed structure. The (1)H spectra also show much sharper resonances in the presence of K(+) indicating that conformational heterogeneity of DDSDPEG is reduced in the presence of potassium as compared to sodium or caesium ions. At the same time the (1)H resonances have longer T:(1) times. This parameter is suggested as a sensitive gauge of stabilisation.

Cations↗

PubMed2001

Evidence for synergy between family 2b carbohydrate binding modules in Cellulomonas fimi xylanase 11A.

Glycoside hydrolases often contain multiple copies of noncatalytic carbohydrate binding modules (CBMs) from the same or different families. Currently, the functional importance of this complex molecular architecture is unclear. To investigate the role of multiple CBMs in plant cell wall hydrolases, we have determined the polysaccharide binding properties of wild type and various derivatives of Cellulomonas fimi xylanase 11A (Cf Xyn11A). This protein, which binds to both cellulose and xylan, contains two family 2b CBMs that exhibit 70% sequence identity, one internal (CBM2b-1), which has previously been shown to bind specifically to xylan and the other at the C-terminus (CBM2b-2). Biochemical characterization of CBM2b-2 showed that the module bound to insoluble and soluble oat spelt xylan and xylohexaose with K(a) values of 5.6 x 10(4), 1.2 x 10(4), and 4.8 x 10(3) M(-1), respectively, but exhibited extremely weak affinity for cellohexaose (<10(2) M(-1)), and its interaction with insoluble cellulose was too weak to quantify. The CBM did not interact with soluble forms of other plant cell wall polysaccharides. The three-dimensional structure of CBM2b-2 was determined by NMR spectroscopy. The module has a twisted "beta-sandwich" architecture, and the two surface exposed tryptophans, Trp 570 and Trp 602, which are in a perpendicular orientation with each other, were shown to be essential for ligand binding. In addition, changing Arg 573 to glycine altered the polysaccharide binding specificity of the module from xylan to cellulose. These data demonstrate that the biochemical properties and tertiary structure of CBM2b-2 and CBM2b-1 are extremely similar. When CBM2b-1 and CBM2b-2 were incorporated into a single polypeptide chain, either in the full-length enzyme or an artificial construct comprising both CBM2bs covalently joined via a flexible linker, there was an approximate 18-20-fold increase in the affinity of the protein for soluble and insoluble xylan, as compared to the individual modules, and a measurable interaction with insoluble acid-swollen cellulose, although the K(a) (approximately 6.0 x 10(4) M(-1)) was still much lower than for insoluble xylan (K(a) = approximately 1.0 x 10(6) M(-1)). These data demonstrate that the two family 2b CBMs of Cf Xyn11A act in synergy to bind acid swollen cellulose and xylan. We propose that the increased affinity of glycoside hydrolases for polysaccharides, through the synergistic interactions of CBMs, provides an explanation for the duplication of CBMs from the same family in some prokaryotic cellulases and xylanases.

Actinomycetales↗

PubMed2001

Pressure-dependent changes in the structure of the melittin alpha-helix determined by NMR.

A novel method is described, which uses changes in NMR chemical shifts to characterise the structural change in a protein with pressure. Melittin in methanol is a small alpha-helical protein, and its chemical shifts change linearly and reversibly with pressure between 1 and 2000 bar. An improved relationship between structure and HN shift has been calculated, and used to drive a molecular dynamics-based calculation of the change in structure. With pressure, the helix is compressed, with the H-O distance of the NH-O=C hydrogen bonds decreased by 0.021 +/- 0.039 A, leading to an overall compression along the entire helix of about 0.4 A, corresponding to a static compressibility of 6 x 10(-6) bar(-1). The backbone dihedral angles phi and psi are altered by no more than +/- 3 degrees for most residues with a negative correlation coefficient of -0.85 between phi(i) and psi(i - 1), indicating that the local conformation alters to maintain hydrogen bonds in good geometries. The method is shown to be capable of calculating structural change with high precision, and the results agree with structural changes determined using other methodologies.

Amides↗

PubMed2001

Characterization of a cellulosome dockerin domain from the anaerobic fungus Piromyces equi.

The recycling of photosynthetically fixed carbon in plant cell walls is a key microbial process. In anaerobes, the degradation is carried out by a high molecular weight multifunctional complex termed the cellulosome. This consists of a number of independent enzyme components, each of which contains a conserved dockerin domain, which functions to bind the enzyme to a cohesin domain within the protein scaffoldin protein. Here we describe the first three-dimensional structure of a fungal dockerin, the N-terminal dockerin of Cel45A from the anaerobic fungus Piromyces equi. The structure contains a novel fold of 42 residues. The ligand binding site consists of residues Trp 35, Tyr 8 and Asp 23, which are conserved in all fungal dockerins. The binding site is on the opposite side of the N- and C-termini of the molecule, implying that tandem dockerin domains, seen in the majority of anaerobic fungal plant cell wall degrading enzymes, could present multiple simultaneous binding sites and, therefore, permit tailoring of binding to catalytic demands.

Amino Acid Sequence↗

PubMed2000

The structural basis for the ligand specificity of family 2 carbohydrate-binding modules.

The interactions of proteins with polysaccharides play a key role in the microbial hydrolysis of cellulose and xylan, the most abundant organic molecules in the biosphere, and are thus pivotal to the recycling of photosynthetically fixed carbon. Enzymes that attack these recalcitrant polymers have a modular structure comprising catalytic modules and non-catalytic carbohydrate-binding modules (CBMs). The largest prokaryotic CBM family, CBM2, contains members that bind cellulose (CBM2a) and xylan (CBM2b), respectively. A possible explanation for the different ligand specificity of CBM2b is that one of the surface tryptophans involved in the protein-carbohydrate interaction is rotated by 90 degrees compared with its position in CBM2a (thus matching the structure of the binding site to the helical secondary structure of xylan), which may be promoted by a single amino acid difference between the two families. Here we show that by mutation of this single residue (Arg-262-->Gly), a CBM2b xylan-binding module completely loses its affinity for xylan and becomes a cellulose-binding module. The structural effect of the mutation has been revealed using NMR spectroscopy, which confirms that Trp-259 rotates 90 degrees to lie flat against the protein surface. Except for this one residue, the mutation only results in minor changes to the structure. The mutated protein interacts with cellulose using the same residues that the wild-type CBM2b uses to interact with xylan, suggesting that the recognition is of the secondary structure of the polysaccharide rather than any specific recognition of the absence or presence of functional groups.

Amino Acid Sequence↗

PubMed2000

The solution structure of Rhodobacter sphaeroides LH1beta reveals two helical domains separated by a more flexible region: structural consequences for the LH1 complex.

Here, the solution structure of the Rhodobacter sphaeroides core light-harvesting complex beta polypeptide solubilised in chloroform:methanol is presented. The structure, determined by homonuclear NMR spectroscopy and distance geometry, comprises two alpha helical regions (residue -34 to -15 and -11 to +6, using the numbering system in which the conserved histidine residue is numbered zero) joined by a more flexible four amino acid residue linker. The C-terminal helix forms the membrane spanning region in the intact LH1 complex, whilst the N-terminal helix must lie in the lipid head groups or in the cytoplasm, and form the basis of interaction with the alpha polypeptide. The structure of a mutant beta polypeptide W(+9)F was also determined. This mutant, which is deficient in a hydrogen bond donor to the bacteriochlorophyll, showed an identical structure to the wild-type, implying that observed differences in interaction with other LH1 polypeptides must arise from cofactor binding. Using these structures we propose a modification to existing models of the intact LH1 complex by replacing the continuous helix of the beta polypeptide with two helices, one of which lies at an acute angle to the membrane plane. We suggest that a key difference between LH1 and LH2 is that the beta subunit is more bent in LH1. This modification puts the N terminus of LH1beta close to the reaction centre H subunit, and provides a rationale for the different ring sizes of LH1 and LH2 complexes.

Amino Acid Sequence↗

PubMed2000

Solution structure of the CBM10 cellulose binding module from Pseudomonas xylanase A.

Plant cell wall hydrolases generally have a modular structure consisting of a catalytic domain linked to one or more noncatalytic carbohydrate-binding modules (CBMs), whose common function is to attach the enzyme to the polymeric substrate. Xylanase A from Pseudomonas fluorescens subsp. cellulosa (Pf Xyn10A) consists of a family 10 catalytic domain, an N-terminal family IIa cellulose-binding module, and an internal family 10 cellulose-binding module. The structure of the 45-residue family 10 CBM has been determined in solution using NMR. It consists of two antiparallel beta-sheets, one with two strands and one with three, with a short alpha-helix across one face of the three-stranded sheet. There is a high density of aromatic residues on one side of the protein, including three aromatic residues (Tyr8, Trp22, and Trp24), which are exposed and form a flat surface on one face, in a classical polysaccharide-binding arrangement. The fold is closely similar to that of the oligonucleotide/oligosaccharide-binding (OB) fold, but appears to have arisen by convergent evolution, because there is no sequence similarity, and the presumed binding sites are on different faces.

Amino Acid Sequence↗

PubMed2000

Trp22, Trp24, and Tyr8 play a pivotal role in the binding of the family 10 cellulose-binding module from Pseudomonas xylanase A to insoluble ligands.

Aromatic amino acids are believed to play a pivotal role in carbohydrate-binding proteins, by forming hydrophobic stacking interactions with the sugar rings of their target ligands. Family 10 cellulose-binding modules (CBM10s), present in a number of cellulases and xylanases expressed by Pseudomonas fluorescens subsp. cellulosa, contain two tyrosine and three tryptophan residues which are highly conserved. To investigate whether these amino acids play an important role in the interaction of CBM10 from P. fluorescens subsp. cellulosa xylanase A (Pf Xyn10A) with cellulose, each of these residues was changed to alanine in CBM10 expressed as a discrete module or fused to the catalytic domain of Pf Xyn10A (CBM10-CD), and the capacity of the mutant proteins of CBM10-CD to bind the polysaccharide was evaluated. The data showed that W22A, W24A, and Y8A bound very weakly to cellulose compared to the wild-type protein, while Y12A retained its capacity to interact with the glucose polymer. When the W7A mutation was introduced into CBM10 the protein domain did not accumulate in Escherichia coli. In contrast, the W7A mutant of CBM10-CD was efficiently expressed in E. coli, although the protein bound very weakly to cellulose. NMR spectra of wild-type CBM10, W22A, and W24A were very similar, suggesting that the mutations did not significantly affect the protein fold. Titration of wild-type CBM10, W22A, and W24A with N-bromosuccinimide indicated that Trp22 and Trp24 were on the surface of the protein, while Trp7 was buried. Collectively, these data indicate that Trp22, Trp24, and Tyr8 play a direct role in the binding of Pf Xyn10A CBM10 to cellulose. The results are discussed in the light of the three-dimensional structure of CBM10 [Raghothama, S., Simpson, P. J., Szabó, L., Nagy, T., Gilbert, H. J., and Williamson, M. P. (2000) Biochemistry 39, 978-984].

Bromosuccinimide↗

PubMed2000

An advantage for use of isotope labeling and NMR chemical shifts to analyze the structure of four homologous IgG-binding domains of staphylococcal protein A.

Because of the complexity arising from the large molecular size and the amino acid sequence homologies of IgG-binding domains of Staphylococcal Protein A (SpA), we have introduced, a combination of stable isotope labeling and both qualitative and quantitative investigations of the structural dependence of the NMR chemical shifts for its structure analysis. In order to enable selective isotope labeling with high efficiency, a mutated low molecular weight Protein A (LPA; MWt = 27 kDa) which consists of E, D, A, B and 13 residues of the C-domain was used in this study. Amide proton chemical shifts, measured using uniformly 15N-labeled LPA and LPA labeled selectively with 15N-alanine, show that the turn between helices 1 and 2, and its tertiary interactions with helix 3, are very similar in all domains. This contradicts previous results obtained using independent structure calculations on isolated domains. The close similarity in NH and 15N chemical shifts of alanine residues in the interdomain linker suggests that the linker maintains a similar structure both in isolated domains and in the intact protein. We show that the high-field shifted methyl signal of Ala 48 is affected by the ring-current effect arising from Phe 30, and has a very similar helical environment in all four domains. Thus, helix 3 is present in all domains, as we previously reported [Kikuchi et al., J Biochem Biophys Method, 1999:38:203-208], even though it is not observed in the crystal structure [Deisenhofer J. Biochemistry 1981;20:2361-2370].

Alanine↗

PubMed2000

Carbohydrate-binding modules from a thermostable Rhodothermus marinus xylanase: cloning, expression and binding studies.

The two N-terminally repeated carbohydrate-binding modules (CBM4-1 and CBM4-2) encoded by xyn10A from Rhodothermus marinus were produced in Escherichia coli and purified by affinity chromatography. Binding assays to insoluble polysaccharides showed binding to insoluble xylan and to phosphoric-acid-swollen cellulose but not to Avicel or crystalline cellulose. Binding to insoluble substrates was significantly enhanced by the presence of Na(+) and Ca(2+) ions. The binding affinities for soluble polysaccharides were tested by affinity electrophoresis; strong binding occurred with different xylans and beta-glucan. CBM4-2 displayed a somewhat higher binding affinity than CBM4-1 for both soluble and insoluble substrates but both had similar specificities. Binding to short oligosaccharides was measured by NMR; both modules bound with similar affinities. The binding of the modules was shown to be dominated by enthalpic forces. The binding modules did not contribute with any significant synergistic effects on xylan hydrolysis when incubated with a Xyn10A catalytic module. This is the first report of family 4 CBMs with affinity for both insoluble xylan and amorphous cellulose.

Base Sequence↗

PubMed2000

Structure and dynamics of photosynthetic membrane-bound proteins in Rhodobacter Sphaeroides, studied with solid-state NMR spectroscopy.

The photosynthetic purple bacteria such as Rb. sphaeroides possesses an intracytoplasmic membrane (ICM) and a variety of pigment-binding membrane proteins located in the ICM, acting as photoreceptor. Such photosynthetic apparatus is concentrated in the ICM. It is composed of three multimeric membrane-bound proteins; light-harvesting complexes (LH 1, LH 2), a reaction center (RC) and a cytochrome b/c1 complex. We have purified these membranes, which are called chromatophores, and characterized the structure and dynamics of the photosynthetic membrane-bound proteins by means of multi-nuclear solid state NMR. First, the isotropic chemical shift of carbonyl carbons in natural abundance and [1-(13)C] Phe labeled chromatophores indicates that the membrane-bound proteins take mainly the helical conformation. Second, the chemical shifts of side-chain resonances of uniformly (15)N-labeled chromatophores indicate the side-chain histidine residue is mainly hydrogen bonded, whereas structural heterogeneity of arginine and lysine side-chains are probed by those wide distribution of (15)N shifts. Thirdly, the [beta-(2)H(3)]Ala and [epsilon-(2)H(2)]Tyr labeling of the chromatophores are performed and dynamics of the [beta-(2)H]Ala and the [epsilon-(2)H(2)]Tyr labeled chromatophores are studied by means of (2)H solid state NMR. The dynamics of [beta-(2)H(3)]Ala is found to be a 10(8)Hz three-site jump motion with 10 degrees liberation along the Calpha-Cbeta bond axis. The (2)H-NMR powder pattern spectrum of [epsilon-(2)H(2)] Tyr labeled chromatophores was interpreted with an averaged correlation time of 5x10(5) Hz with 180 degrees two-fold flips, the result of the averaging of two kinds of split spectra in terms of motional time scale.

Journal Article↗

PubMed2000

Structure determination of [Arg8]vasopressin methylenedithioether in dimethylsulfoxide using NMR.

The structure of [Arg8]vasopressin methylenedithioether ([AVP]CH2) has been determined in dimethylsulfoxide-d6. Two-dimensional DQF-COSY and NOESY spectra were measured and used to derive angle and distance constraints for restrained molecular dynamics (MD) calculations. In the MD trajectory, two types of beta-turn structure were found in the region from Tyr2 to Asn5, suggesting an equilibrium between type-I and type-II' beta-turn structures. When Halpha chemical shifts were used as an additional constraint, the type-I turn was favoured. To validate this result, an independent energy minimization procedure was used, using differences between calculated and observed chemical shifts. The two approaches gave essentially identical results. It is therefore concluded that the type-I turn predominates in solution. Analysis of calculated chemical shift contributions suggests that the beta-turn structure found in AVP is well preserved in [AVP]CH2, although the pressin ring size is expanded.

Amino Acid Sequence↗

PubMed2000

The importance of being proline: the interaction of proline-rich motifs in signaling proteins with their cognate domains.

Acommon focus among molecular and cellular biologists is the identification of proteins that interact with each other. Yeast two-hybrid, cDNA expression library screening, and coimmunoprecipitation experiments are powerful methods for identifying novel proteins that bind to one's favorite protein for the purpose of learning more regarding its cellular function. These same techniques, coupled with truncation and mutagenesis experiments, have been used to define the region of interaction between pairs of proteins. One conclusion from this work is that many interactions occur over short regions, often less than 10 amino acids in length within one protein. For example, mapping studies and 3-dimensional analyses of antigen-antibody interactions have revealed that epitopes are typically 4-7 residues long (1). Other examples include protein-interaction modules, such as Src homology (SH) 2 and 3 domains, phosphotyrosine binding domains (PTB), postsynaptic density/disc-large/ZO1 (PDZ) domains, WW domains, Eps15 homology (EH) domains, and 14-3-3 proteins that typically recognize linear regions of 3-9 amino acids. Each of these domains has been the subject of recent reviews published elsewhere (2 3 4 5 6 7). Among the primary structures of many ligands for protein-protein interactions, the amino acid proline is critical. In particular, SH3, WW, and several new protein-interaction domains prefer ligand sequences that are proline-rich. In addition, even though ligands for EH domains and 14-3-3 domains are not proline-rich, they do include a single proline residue. This review highlights the analysis of those protein-protein interactions that involve proline residues, the biochemistry of proline, and current drug discovery efforts based on proline peptidomimetics.-Kay, B. K., Williamson, M. P., Sudol, M. The importance of being proline: the interaction of proline-rich motifs in signaling proteins with their cognate domains.

Amino Acid Motifs↗

PubMed1999

The type II and X cellulose-binding domains of Pseudomonas xylanase A potentiate catalytic activity against complex substrates by a common mechanism.

Xylanase A (Pf Xyn10A), in common with several other Pseudomonas fluorescens subsp. cellulosa polysaccharidases, consists of a Type II cellulose-binding domain (CBD), a catalytic domain (Pf Xyn10A(CD)) and an internal domain that exhibits homology to Type X CBDs. The Type X CBD of Pf Xyn10A, expressed as a discrete entity (CBD(X)) or fused to the catalytic domain (Pf Xyn10A'), bound to amorphous and bacterial microcrystalline cellulose with a K(a) of 2.5 x 10(5) M(-1). CBD(X) exhibited no affinity for soluble forms of cellulose or cello-oligosaccharides, suggesting that the domain interacts with multiple cellulose chains in the insoluble forms of the polysaccharide. Pf Xyn10A' was 2-3 times more active against cellulose-hemicellulose complexes than Pf Xyn10A(CD); however, Pf Xyn10A' and Pf Xyn10A(CD) exhibited the same activity against soluble substrates. CBD(X) did not disrupt the structure of plant-cell-wall material or bacterial microcrystalline cellulose, and did not potentiate Pf Xyn10A(CD) when not covalently linked to the enzyme. There was no substantial difference in the affinity of full-length Pf Xyn10A and the enzyme's Type II CBD for cellulose. The activity of Pf Xyn10A against cellulose-hemicellulose complexes was similar to that of Pf Xyn10A', and a derivative of Pf Xyn10A in which the Type II CBD is linked to the Pf Xyn10A(CD) via a serine-rich linker sequence [Bolam, Cireula, McQueen-Mason, Simpson, Williamson, Rixon, Boraston, Hazlewood and Gilbert (1998) Biochem J. 331, 775-781]. These data indicate that CBD(X) is functional in Pf Xyn10A and that no synergy, either in ligand binding or in the potentiation of catalysis, is evident between the Type II and X CBDs of the xylanase.

Base Sequence↗