PubMed Health⌕ Search

Biomedical subjects

Maria Minunni

Publications and source records attributed to Maria Minunni.

11 recordsLinked to original sources

Detection of clinically relevant point mutations by a novel piezoelectric biosensor.

Piezoelectric sensing is here applied to point mutation detection in human DNA. The mutation investigated is in the TP53 gene, which results inactivated in most cancer types. TP53 gene maps on chromosome 17 (17p13.1). It contains 11 exons and codifies for the relative protein, involved in cell proliferation. The TP53 gene has a wide mutation spectrum that is related to different tumours. In particular, those occurring in the structurally important L2 and L3 zinc-binding domains, have been linked to patient prognosis and more strongly to radiotherapy and chemotherapy resistance in several major cancers. For this reason, the identification of these mutations represents an important clinical target and biosensors could represent good candidate for fast mutation screening. In this paper, a DNA-based piezoelectric biosensor for the detection of the TP53 gene mutation at codon 248 is reported. A biotinylated probe was immobilised on the sensor surface via dextran-streptavidin modified surfaces. The sensor was optimised using synthetic oligonucleotides. Finally, the sensor system was successfully applied to polymerase chain reaction (PCR)-amplified real samples of DNA extracted from two cell lines, one normal (wild-type) and one mutated, carrying the mutation at codon 248 of the TP53 gene. The results obtained demonstrate that the DNA-based piezoelectric biosensor is able to detect the point mutations in PCR-amplified samples showing the potentialities of this approach for routine analysis.

Biosensing Techniques↗

Piezoelectric biosensors: strategies for coupling nucleic acids to piezoelectric devices.

The development of a piezoelectric biosensor based on nucleic acids interaction is presented focusing on the methodology for probe immobilization. This is a key step in any DNA biosensor development. Often, the detection limits and, in general, the analytical performances of the biosensor can be improved by optimizing the immobilization of the receptor on the transducer surface. DNA must be attached to the solid support, retaining native conformation, and binding activity. This attachment must be stable over the course of a binding assay and, in addition, sufficient binding sites must be presented to the solution phase to interact with the analyte. In this paper, the optimization of the coating of the gold quartz crystal surface, to immobilize an oligonucleotide probe, is reported. Two immobilization procedures are illustrated in details with a comparison regarding the immobilization of the probe, the detection of the hybridization reaction, and the possibility of regeneration. The two procedures are based on the use of biotinylated or thiolated DNA probes. Specific applications will be also presented.

Biosensing Techniques↗

Detection of fragmented genomic DNA by PCR-free piezoelectric sensing using a denaturation approach.

Label-free and real-time DNA sequence detection in PCR-amplified DNA samples can now be achieved by different approaches. On the contrary, only few works have been reported dealing with direct sequence detection in nonamplified genomic DNA. Here, a piezoelectric biosensor for direct detection of sequences in nonamplified genomic DNA is described. The system relies on real-time and label-free detection of the hybridization reaction between an immobilized probe and the complementary sequence in solution. The DNA probe is immobilized on the sensing surface (10 MHz quartz crystals), while the complementary sequence is present in the genomic DNA, previously fragmented with restriction enzymes.

Biosensing Techniques↗

Detection of TP53 mutation using a portable surface plasmon resonance DNA-based biosensor.

A DNA-based surface plasmon resonance (SPR) biosensor has been developed for the detection of TP53 mutation using the inexpensive and commercially available instrument, SPREETA SPR-EVM-BT, from Texas Instruments. A direct immobilisation procedure, based on the coupling of thiol-derivatised oligonucleotide probes (Probe-C6-SH) to bare gold sensor surfaces, was optimized using synthetic oligonucleotides. Hybridisation reactions between the immobilised probe and a short sequence (26 mer) complementary, non-complementary and one-point mutation DNA were then investigated. The main analytical parameters of the sensor system were studied in detail including selectivity, sensitivity, reproducibility and analysis time. Finally, the sensor system was successfully applied to polymerase chain reaction (PCR)-amplified real samples, DNA extracted from both normal, wild-type, (Jurkat) and mutated (Molt 4), carrying the mutation at codon 248 of the TP53 cell lines. The results obtained demonstrate that the DNA-based SPR biosensor was able to distinguish sequences present in the various samples that differ only by one base; and hence, it appears to be a strong candidate technique for the detection of gene mutation.

Biosensing Techniques↗

Identification of mammalian species using genosensors.

This work reports the development of DNA biosensors for the identification of mammalian species in real samples based on specific oligonucleotide probes. The oligonucleotide sequences (the probes) of each species studied were selected starting from the sequence of satellites DNA. Two inosine-modified (guanine-free) DNA sequences of 21 and 25 bases have been immobilised on screen printed electrodes (SPEs) as capturing agent and the detection of the duplex formation, via guanine oxidation of the target, was examined and optimised. The duplex formation was detected using the square-wave voltammetry. The developed sensors were applied on bovine and porcine DNA extract samples without polymerase chain reaction (PCR), after a restriction enzyme digestion to avoid steric hindrance. Using standard solutions the hybridisation event was identified when 3 microg/mL of complementary oligonucleotide were presented in solution with a coefficient of variation (CV) of 15%. Using total genomic DNA extracts a clear discrimination of the species with a detection limit of less than 30 microg/ml of total genomic bovine DNA was obtained (CV < 20%). The sensors were able to discriminate among the species indicating that the approach is suitable for the identification of mammalian species.

Animals↗

Direct immobilisation of DNA probes for the development of affinity biosensors.

An immobilisation procedure based on the direct coupling of thiolated probes (Probe-C6-SH) to bare gold sensor surfaces has been compared with a reference immobilisation method, based on the coupling of biotinylated probes onto a streptavidin-coated dextran-modified surface. The instrumentations used were a quartz crystal microbalance (QCM) and the optical instruments Biacore X and Spreeta based on surface plasmon resonance (SPR). The performances of the DNA-based sensors resulting from direct coupling of thiolated DNA probes onto electrodes of quartz crystals or gold SPR-chips have been studied in terms of the main analytical parameters, i.e. selectivity, sensitivity, reproducibility, etc. In particular, the two immobilisation approaches have been applied to the analysis of oligonucleotides, DNA amplified by polymerase chain reaction (PCR) and genomic DNA enzymatically digested.

Animals↗

Immobilisation of DNA probes for the development of SPR-based sensing.

An immobilisation procedure based on the direct coupling of thiol-derivatised oligonucleotide probes to bare gold sensor surfaces has been used for DNA sensing applications. The instrumentation used relies on surface plasmon resonance (SPR) transduction; in particular the commercially available instruments BIACORE X and SPREETA, have been employed in this study. The performances of the SPR-based DNA sensors resulting from direct coupling of thiol-derivatised DNA probes onto gold chips, have been studied in terms of the main analytical parameters, i.e. selectivity, sensitivity, reproducibility, analysis time, etc. A comparison between the thiol-derivatised immobilisation approach and a reference immobilisation method, based on the coupling of biotinylated oligonucleotide probes onto a streptavidin coated dextran sensor surface, using synthetic complementary oligonucleotides has been discussed. Finally, a denaturation method to obtain ssDNA ready for hybridisation analysis has been applied to polymerase chain reaction (PCR) amplified samples, for the detection of genetically modified organisms (GMOs).

Adsorption↗

A new approach for the detection of DNA sequences in amplified nucleic acids by a surface plasmon resonance biosensor.

In this paper, a simple and useful approach for DNA sensing based on surface plasmon resonance (SPR) transduction is reported. A new DNA sample pre-treatment has been optimised to allow fast and simple detection of hybridisation reaction between a target sequence in solution and a probe immobilised on the sensing surface. This pre-treatment consisted in a denaturation procedure of double stranded DNA containing the target sequence and was based on an high temperature treatment (95 degrees C, 5 min) followed by a 1 min incubation with small oligonucleotides. The oligonucleotides are designed to prevent the re-hybridising of the denatured strands, while enabling the target sequence to bind the immobilised probe. The important parameters of the procedure, i.e. incubation time, length and concentration of the oligonucleotides, have been studied in detail. The optimised DNA denaturation procedure has been successfully applied to the detection of amplified DNA with a commercially available SPR biosensor (Biacore X). DNA samples extracted from plant and human blood were tested after amplification by polymerase chain reaction (PCR).

Apolipoproteins E↗

Towards fast and inexpensive molecular diagnostic: the case of TP53.

BACKGROUND: Much research suggests that TP53 mutations have prognostic importance and sometimes are a significant factor in clinical oncology. A considerable effort has been made to develop fast and inexpensive methods for TP53 mutations detection. METHODS: On the basis of describing the role of TP53 as tumor suppressor gene and TP53 mutation spectrum, the authors discuss conventional methods and new technologies for TP53 mutations detection. This discussion is supported by more recent publications in the field of both molecular genetics and analysis technologies. RESULTS: Biosensors and gene chips are of considerable recent interest, due to their tremendous promise for obtaining sequence-specific information in a faster, simpler and cheaper manner compared to traditional methods. CONCLUSIONS: New methods such as biosensors and gene chips appear promising as analytical methods of detecting mutations.

Biomarkers, Tumor↗

Combination of amplification and post-amplification strategies to improve optical DNA sensing.

The work evaluated a series of approaches to optimise detection of polymerase chain reaction (PCR) amplified DNA samples by an optical sensor based on surface plasmon resonance (SPR) (BiacoreX). The optimised procedure was based on an asymmetric PCR amplification system to amplify predominantly one DNA strand, containing the sequence complementary to a specific probe. The study moved into two directions, aiming to improve the analytical performance of SPR detection in PCR amplified products. One approach concerned the application of new strategies at the level of PCR, i.e. asymmetric PCR to obtain ssDNA amplified fragments containing the target capable of hybridisation with the immobilised complementary probe. The other strategy focused on the post-PCR amplification stage. Optimised denaturing conditions were applied to both symmetrically and asymmetrically amplified fragments. The effective combination of the two strategies allowed a rapid and specific hybridisation reaction. The developed method was successfully applied in the detection of genetically modified organisms.

Biosensing Techniques↗

Quartz crystal microbalance (QCM) affinity biosensor for genetically modified organisms (GMOs) detection.

A DNA piezoelectric sensor has been developed for the detection of genetically modified organisms (GMOs). Single stranded DNA (ssDNA) probes were immobilised on the sensor surface of a quartz crystal microbalance (QCM) device and the hybridisation between the immobilised probe and the target complementary sequence in solution was monitored. The probe sequences were internal to the sequence of the 35S promoter (P) and Nos terminator (T), which are inserted sequences in the genome of GMOs regulating the transgene expression. Two different probe immobilisation procedures were applied: (a) a thiol-dextran procedure and (b) a thiol-derivatised probe and blocking thiol procedure. The system has been optimised using synthetic oligonucleotides, which were then applied to samples of plasmidic and genomic DNA isolated from the pBI121 plasmid, certified reference materials (CRM), and real samples amplified by the polymerase chain reaction (PCR). The analytical parameters of the sensor have been investigated (sensitivity, reproducibility, lifetime etc.). The results obtained showed that both immobilisation procedures enabled sensitive and specific detection of GMOs, providing a useful tool for screening analysis in food samples.

Affinity Labels↗