PubMed Health⌕ Search

Biomedical subjects

Martin Lutz

Publications and source records attributed to Martin Lutz.

At least 37 records · Page 2Linked to original sources

Rodlike bimetallic ruthenium and osmium complexes bridged by phenylene spacers. Synthesis, electrochemistry, and photophysics.

In the search for light-addressable nanosized compounds we have synthesized 10 dinuclear homometallic trisbipyridyl complexes of linear structure with the general formula [M(bpy)3-BL-M(bpy)3]4+ [M = Ru(II) or Os(II); BL = polyphenylenes (2, 3, 4, or 5 units) or indenofluorene; bpy = 2,2'-bipyridine]. By using a "chemistry on the complex" approach, different sizes of rodlike systems have been obtained with a length of 19.8 and 32.5 A for the shortest and longest complex, respectively. For one of the ruthenium precursors, [Rubpy-ph2-Si(CH3)3][PF6]2, single crystals were obtained by recrystallization from methanol. Their photophysical and electrochemical properties are reported. All the compounds are luminescent both at room and low temperature with long excited-state lifetimes due to an extended delocalization. Nanosecond transient absorption showed that the lowest excited state involves the chelating unit attached to the bridging ligand. Electrochemical data indicated that the first reduction is at a slightly more positive potential than for the reference complexes [M(bpy)3]2+ (M = Ru, Os). This result confirms that the best acceptor is the bipyridine moiety connected to the conjugated spacers. The role of the tilt angle between the phenylene units, in the two series of complexes, for the ground and excited states is discussed.

Journal Article↗

Strained, stable 2-aza-1-phosphabicyclo[n.1.0]alkane and -alkene Fe(CO)4 complexes with dynamic phosphinidene behavior.

The synthesis of highly strained bicyclic phosphirane and phosphirene iron-tetracarbonyl complexes, that is, complexes with 2-aza-1-phosphabicyclo[n.1.0]alkanes and -alkenes (n = 3-5), is explored by using intramolecular cycloaddition of an in situ generated electrophilic phosphinidene complex, [R(iPr)NP=Fe(CO)(4)], to its C=C- and C[triple chemical bond]C-containing R substituent. Saturated bicyclic complexes 7 a-c with n = 4-2 are remarkably stable, as illustrated by the X-ray crystal structure for 7 b (n=3), yet all readily undergo retroaddition to react with phenylacetylene. Shuttling of the phosphinidene iron complex between two equivalent C=C groups is demonstrated for a 1-butene-substituted 2-aza-1-phosphabicyclo[3.1.0]hexane by selective (1)H NMR magnetization transfer from the phosphirane protons to the olefinic protons. Even the more strained unsaturated bicycles 17 a,b (n = 4,3) are surprisingly stable as illustrated by the X-ray crystal structure for 17 a (n = 4), but the smaller phosphabicyclo[3.1.0]hex-5-ene (17 c, n = 2) dimerizes to tricyclic 19 with a unique ten-membered heterocyclic ring; an X-ray crystal structure is reported. Like their saturated analogues also the bicyclic phosphirenes readily undergo retroaddition as shown by the reaction of their phosphinidene iron moiety with phenylacetylene.

Alkenes↗

Phosphepines: convenient access to phosphinidene complexes.

Reaction of o-diethynylbenzene with transition metal-complexed primary phosphines gives in a single base-induced step stable phosphepine complexes as confirmed by X-ray data. At 75-80 degrees C these phosphepines undergo clean cheletropic elimination of naphthalene to give transient carbene-like phosphinidene complexes that can be trapped in high yield by alkenes, alkynes, and alcohols.

Journal Article↗

Pseudomerohedrally twinned crystal structure of 2,3-diphenylbuta-1,3-diene.

The title compound, C16H14, is twinned by reticular pseudomerohedry of twin index 2. The primitive monoclinic cell of the single crystal can be transformed into a B-centred pseudo-orthorhombic supercell with a fourfold volume. The twofold twin operation about the reciprocal a* axis of the primitive monoclinic cell is co-directional with the approximate C2 axis of the molecule and a symmetry element of the orthorhombic supercell. A tentative twin domain model is proposed.

Butadienes↗

Formation of organolithium hetero-aggregates [Li4Ar2(nBu)2] (Ar=C6H4CH(Me)NMe2-2) during the directed ortho-lithiation of [1-(dimethylamino)ethyl]benzene.

(R)-[1-(Dimethylamino)ethyl]benzene reacts with nBuLi in a 1:1 molar ratio in pentane to quantitatively yield a unique hetero-aggregate (2 a) containing the lithiated arene, unreacted nBuLi, and the complexed parent arene in a 1:1:1 ratio. As a model compound, [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)] (2 b) was prepared from the quantitative redistribution reaction of the parent lithiated arene Li(C(6)H(4)CH(Me)NMe(2)-2) with nBuLi in a 1:1 molar ratio. The mono-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))] (2 c) and the bis-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))(2)] (2 d) were obtained by re-crystallization of 2 b from pentane/Et(2)O and pure Et(2)O, respectively. The single-crystal X-ray structure determinations of 2 b-d show that the overall structural motifs of all three derivatives are closely related. They are all tetranuclear Li aggregates in which the four Li atoms are arranged in an almost regular tetrahedron. These structures can be described as consisting of two linked dimeric units: one Li(2)Ar(2) dimer and a hypothetical Li(2)nBu(2) dimer. The stereochemical aspects of the chiral Li(2)Ar(2) fragment are discussed. The structures as observed in the solid state are apparently retained in solution as revealed by a combination of cryoscopy and (1)H, (13)C, and (6)Li NMR spectroscopy.

Journal Article↗

Diastereoselective self-assembly of chiral diamine-chelated aryllithiums to dimeric aggregates.

Aryllithium compounds [LiC6H4(CH2N(Et)CH2CH2NEt2)-2]2 (2b), [LiC6H4(CH(Me)N(Me)CH2CH2NMe2-(R))-2]2 ((R)-3b), and [LiC6H4(CH(Me)N(Me)CH2CH2NMe2-(rac))-2]2 ((rac)-3b) were synthesized and characterized in the solid state and in solution. X-ray crystallographic studies of 2b and (R)-3b and molecular weight determinations of 2b, (R)-3b, and (rac)-3b by cryoscopy in benzene showed that, both in the solid state and in apolar, noncoordinating solvents such as benzene, these compounds exist as discrete dimeric aggregates. For (R)-3b and (rac)-3b the aggregation process of two monomeric aryllithium units to one dimer is highly diastereoselective.

Journal Article↗

Bulky monodentate phosphoramidites in palladium-catalyzed allylic alkylation reactions: aspects of regioselectivity and enantioselectivity.

A series of bulky monodentate phosphoramidite ligands, based on biphenol, BINOL and TADDOL backbones, have been employed in the Pd-catalysed allylic alkylation reaction. Reaction of disodium diethyl 2-methyl malonate with monosubstituted allylic substrates in the presence of palladium complexes of the phosphoramidite ligands proceeds smoothly at room temperature. The regioselectivities observed depend strongly on the leaving group and the geometry of the allylic starting compounds. Mono-coordination occurs when these ligands are ligated in [Pd(allyl)(X)] complexes (allyl=C3H5, 1-CH3C3H4, 1-C6H5C3H4, 1,3-(C6H5)2C3H3; X=Cl, OAc). The solid-state structure determined by X-ray diffraction of [Pd(C3H5)(1)(Cl)] reveals a non-symmetric coordination of the allyl moiety, caused by the stronger trans influence of the phosphoramidite ligand relative to X-. In all of these complexes, the syn,trans isomer is the major species present in solution. Because of fast isomerisation and high reactivity of the syn,cis complex, the major product formed upon alkylation is the linear product, especially for monosubstituted phenylallyl substrates in the presence of halide counterions. In the case of biphenol- and BINOL-based phosphoramidites, however, a strong memory effect is observed when 1-phenyl-2-propenyl acetate is employed as the substrate. In this case, nucleophilic attack competes effectively with the isomerisation of the transient cinnamylpalladium complexes. The asymmetric allylic alkylation of 1,3-diphenyl-2-propenyl acetate afforded the chiral product in up to 93 % ee. Substrates with smaller substituents gave lower enantioselectivities. The observed stereoselectivity is explained in terms of a preferential rotation mechanism, in which the product is formed by attack on one of the isomers of the intermediate [Pd[1,3-(C6H5)2C3H3](L)(OAc)] complex.

Journal Article↗

C-C bond insertion of a complexed phosphinidene into 1,6-methano[10]annulene.

Reaction of electrophilic phosphinidene complex [MePW(CO)5] with 1,6-methano-[10]annulene results in the sole formation of the isomeric C-C insertion products 6 c (main) and 6 d (minor). The single-crystal X-ray structure of the complexed 1,7-methano-3-phospha[11]annulene (6 c) shows a syn-W(CO)5 group at the exo bent phosphorus. The structure displays C-C bond alternation without bonding between the bridgehead carbon atoms. Density functional theory calculations indicate 6 c to result from a concerted disrotatory ring opening of an undetected tricyclic exo-syn phosphirane intermediate. The endo-anti phosphirane cannot undergo ring expansion, due to the high barrier that is associated with an intramolecular antara-antara retro Diels-Alder reaction. The stabilizing effect of transition-metal coordination is discussed.

Journal Article↗

Canine-specific STR typing of saliva traces on dog bite wounds.

Forensic investigations in dog attacks usually involve the examination of bite marks and toothprints, the dog's stomach and pathological methods. For identification of the offending dog we evaluated canine STR typing of saliva traces on dog bite marks. The specificity of 15 canine-specific STRs was tested on human-canine DNA mixtures prior to an applied study in which 52 cases of dog bites were investigated. The first-aid wound bandages as well as swab samples from the surrounding area of the wound were used for DNA analyses. Generally, it was possible to obtain a canine-specific STR profile from the dog's saliva left on the wound area, even when high background of human DNA was present (blood). Interestingly, we found canine STR typing to be more successful when the bandages and swabs showed high amounts of human blood, i.e. when the dog bite was severe. Canine saliva was then sometimes visible as white-coloured secretion on the human blood surface. Less severe bite cases, which did not result in bleeding wounds, showed less success in obtaining useful STR results, probably due to the fact that the surface of the wounds may have been treated before the victims consulted medical aid which therefore removed the canine cells.

Adolescent↗

Pincer-porphyrin hybrids.

[reaction: see text] Starting from tetrakis(3,5-bis(bromomethyl)phenyl)porphyrin, pincer-porphyrin hybrid molecules (tetrakis(ECE-pincer)porphyrin; E = N, P, S) based on a tetraphenylporphyrin skeleton have been prepared in high yields. These multi-ligand site compounds could be selectively metalated at their peripheries, which was shown by X-ray crystallography.

Journal Article↗

Generating and dimerizing the transient 16-electron phosphinidene complex [Cp*Ir=PAr]: a theoretical and experimental study.

The properties of the 16-electron phosphinidene complex [CpRIr=PR] were investigated experimentally and theoretically. Density functional theory calculations show a preferred bent geometry for the model complex [CpIr=PH], in contrast to the linear structure of [CpIr=NH]. Dimerization to give [[CpIr=PH]2] and ligand addition to afford [Cp(L)Ir=PH] (L=PH3, CO) were calculated to give compounds that were energetically highly favorable, but which differed from the related imido complexes. Transient 16-electron phosphinidene complex [Cp*Ir=PAr] could not be detected experimentally. Dehydrohalogenation of [Cp*IrCl2(PH2Ar)] in CH2Cl2 at low temperatures resulted in the novel fused-ring systems 17 (Ar=Mes*) and 20 (Ar=Mes), with dimeric [[Cp*Ir=PAr]2] being the likely intermediate. Intramolecular C-H bond activation induced by steric factors is considered to be the driving force for the irreversible formation of 17 and 20. ONIOM calculations suggest this arises because of the large steric congestion in [[Cp*Ir=PAr]2], which forces it toward a more reactive planar structure that is apt to rearrange.

Computer Simulation↗