Biomedical subjects

P L Desbène

Publications and source records attributed to P L Desbène.

8 recordsLinked to original sources

PubMed2005

Analysis of neutral surfactants by non-aqueous capillary electrophoresis using an electroosmotic flow reversal.

The separation of KM 20, that is in fact a mixture of non-ionic surfactants, was carried out by non-aqueous capillary electrophoresis. This complex mixture resulting from the condensation of ethylene oxide with fatty alcohols does not have chromophoric moieties. So, we analysed it after derivatization by means of 3,5-dinitrobenzoyl chloride. The proposed approach is based both on the formation of complexes with alkaline or ammonium cations in methanol and on the utilisation of a positively charged capillary. From a comparative study on the capillary treatment procedure, we used hexadimethrine bromide as electroosmotic flow reverser in order to obtain both repeatable analyses and good resolutions of the largest KM 20 oligomers. Then, among the five cations used to form complexes with KM 20, we pointed out that ammonium cation led to the best resolutions. Moreover, we evidenced that the counter-ion of this cation had a great influence on resolution because it modified the magnitude of electroosmotic flow. Ion pair formation that is more or less strong between ammonium and its counter-ion was involved in this variation of electroosmotic flow. So, we calculated the association constants for various ammonium salts in methanol. Then, using ammonium chloride as background electrolyte, we optimised the concentration of this salt, in methanol, in order to reach the optimal separation of KM 20 oligomers. Thus, a baseline separation was obtained by using 6 x 10(-2) mol/L NH4Cl as running electrolyte. In these conditions, we separated, in about 30 min, more than 30 oligomers of KM 20. The distribution of these oligomers that was determined from the optimal separation, appeared consistent with that obtained from HPLC analyses. Indeed, we determined that the mean ethoxylation number was equal to 18 while its real value is equal to 20.

Electrophoresis, Capillary↗

PubMed2005

Electrophoretic separations of twelve phenothiazines and N-demethyl derivatives by using capillary zone electrophoresis and micellar electrokinetic chromatography with non ionic surfactant.

We focused our work on the separation of phenothiazines that are important drugs used for the treatment of psychic diseases. For a better understanding of the metabolism of these solutes, we wanted to separate not only a mixture of 12 phenothiazines but also a mixture containing phenothiazines and their N-demethyl metabolites by capillary electrophoresis. Separations in capillary zone electrophoresis were performed using 3 x 10(-2) mol/L H3PO4 (pH 2.5) but the obtained resolutions were not entirely satisfactory especially with regard to phenothiazine -N-demethyl derivative pairs. To improve the obtained results, we have performed separations by using micellar electrokinetic chromatography. In this approach, we used a running electrolyte containing 3 x 10(-2) mol/L H3PO4 electrolyte (pH 2.5) and octaethylene glycol monododecyl ether (C12E8) as neutral surfactant. By introducing 2 x 10(-3) mol/L C12E8 in the electrolyte, 11 out of 12 phenothiazines have been baseline separated. With respect to the separation of a mixture containing 3 phenothiazines and their 3 demethyl derivatives, we obtained an excellent separation by using a running electrolyte prepared with 7.5 x 10(-4) mol/L C12E8 and 3 x 10(-2) mol/L H3PO4.

Chromatography, Micellar Electrokinetic Capillary↗

PubMed2004

Determination of acidity constants of enolisable compounds by capillary electrophoresis.

Research on the structure-activity relationships of molecules with acidic carbon atoms led us to undertake a feasibility study on the determination of their acidity constants by capillary electrophoresis (CE). The studied molecules had diverse structures and were tetronic acid, acetylacetone, diethylmalonate, Meldrum's acid, 3-methylrhodanine, nitroacetic acid ethyl ester, pyrimidine-2,4,6-trione, 3-oxo-3-phenylpropionic acid ethyl ester, 1-phenylbutan-1,3-dione, 5,5-dimethylcyclohexan-1,3-dione and homophthalic anhydride. The p Ka range explored by CE was therefore very large (from 3 to 12) and p Ka values near 12 were evaluated by mathematical extrapolations. The analyses were carried out in CZE mode using a fused silica capillary grafted (or not) with hexadimethrine. Owing to the electrophoretic behaviour of these compounds according to the pH, their acidity constants could be evaluated and appeared in perfect agreement with the literature data obtained, a few decades ago, by means of potentiometry, spectrometry or conductimetry. The p Ka of homophthalic anhydride and 3-methylrhodanine were evaluated for the first time.

Journal Article↗

PubMed2004

Study of the acid hydrolysis of (3-methacryloxypropyl)trimethoxysilane by capillary electrophoresis-ion-trap mass spectrometry.

The sol-gel method is a widely used technique for the synthesis of various functional coating films. Alkoxysilanes such as (3-methacryloxypropyl)trimethoxysilane (MEMO) are largely used as precursors for inorganic-organic hybrid sol-gel materials. Indeed, these compounds can form complex network, through hydrolysis and condensation reactions. The latter have to be perfectly controlled to obtain the required properties. In such a context, we have studied the potentialities of capillary electrophoresis-ion-trap mass spectrometry (CE-MS) coupling to resolve both separation and characterization of the synthesized compounds as a function of the hydrolysis time. The study of acid hydrolysis of MEMO was carried out as an example. After optimization of the running electrolyte in capillary zone electrophoresis (CZE) with UV detection, we characterized the synthesized compounds in CE-MS by using positive detection mode. The obtained resolution in CZE-UV was not entirely satisfactory because of the very closed charge/mass ratio of formed solute but also because of the interaction between the solutes and the capillary walls. Nevertheless, several oligomers were characterized in CE-MS. The absence of detection with regard to oligomers that possess higher molecular masses than octamer is discussed in this work.

Electrophoresis, Capillary↗

PubMed2003

Analytical investigation of the self-desorption of the oligomers of mixtures of a polydisperse ethoxylated surfactant with sodium dodecylsulfate from a silica/water interface.

The adsorption isotherms onto a hydrophilic silica of mixtures of sodium dodecylsulfate (SDS) and of all the oligomers of a polydisperse nonylethylene glycol n-dodecyl ether (C(12)E(9)) surfactant were determined using a high-performance liquid chromatography (HPLC) technique. Incorporation of the anionic surfactant to the negatively charged silica surface is favored by the adsorption of the nonionic surfactant. Comparison between the adsorption isotherms of mixtures of SDS with a monodisperse C(12)E(9) and a polydisperse C(12)E(9) shows that the adsorption of SDS at the silica/water interface is stronger with the latter material than with the former in a large surface coverage domain. The composition of the surface aggregates and the variation of the oligomer distribution in these aggregates were determined. The previously described phenomena called self-desorption which was observed for the global C(12)E(9) and SDS surfactant mixtures was confirmed: increasing the total concentration at a fixed surfactant ratio induces at high concentration a desorption of the anionic surfactant and all of the less polar oligomers from the solid/water interface. An interpretation scheme is proposed which assumes that the interaction of SDS is larger with the less polar oligomers than with the polar ones. The self-desorption effect could then be considered as the consequence of the polydispersity of the nonionic surfactant and to the net repulsion interaction between SDS and the silica surface as the mole fraction of SDS in the surfactant mixture increases.

Adsorption↗

PubMed2000

Simultaneous quantitative trace analysis of anionic and nonionic surfactant mixtures by reversed-phase liquid chromatography.

The aim of this work was to simultaneously analyse mixtures of a polydisperse polyethylene oxide (PEO) nonionic surfactant and an anionic surfactant (sodium dodecylsulphate, SDS) in water containing sodium chloride in order to quantify trace amounts of these mixtures after their adsorption at water-solid interfaces. A fractional factorial design was then used to optimise the separation by ion-pair reversed-phase liquid chromatography as a function of six factors: the chain length of the tetraalkylammonium salt used as ion-pairing reagent which varied from methyl (C1) to n-propyl (C3); the concentration of this ion-pairing salt; the acetonitrile percentage in water used as organic modifier; the flow-rate; the temperature of analysis and also the sodium chloride concentration. The factorial design enabled in a limited number of analyses, not only to determine which factors had significant effects on retention times or on resolution between a pair of nonionic oligomers, but also to modelize and then find the interesting and rugged area where this resolution was optimal as well as the conditions where time of analysis was not prohibitive. After optimisation of HPLC analysis, we used a trace enrichment procedure to quantify very low concentrations of SDS and C12E9 polydisperse PEO in water. A C18 cartridge and a strong anionic exchange cartridge were coupled and the conditions of elution were optimised in order to obtain concentrated samples which were injected in the same eluent than the HPLC mobile phase. Under such conditions, we were able to quantify, in a single run, mixtures of anionic and nonionic surfactants at concentrations as low as 3.6 microg l(-1) for SDS and 2.5 microg l(-1) for each PEO oligomer in water.

Anions↗

PubMed2000

Utilization of fluorescein sodium salt for the indirect fluorimetric detection in micellar electrokinetic chromatography.

The potential of fluorescein sodium salt to generate a background signal in indirect fluorimetric detection in micellar electrokinetic chromatography (MEKC) has been studied by using a sample test containing various alcohols (methanol, ethanol, propan-1-ol, propan-2-ol, 2-methylpropan-1-ol, pentan-3-ol, 2-methylbutan-1-ol, 3-methylbutan-1-ol), acetaldehyde, acetone and ethyl acetate. In order to optimize sample test resolution and detection sensitivity, we have studied different parameters: sodium dodecyl sulfate concentration, electrolyte ionic strength, applied voltage as well as that of the addition of an organic cosolvent within the running electrolyte. Although the micellar pseudo-phase was not able to be saturated with the fluorophore in order to obtain the maximal detection sensitivity, the detection thresholds were satisfactory. By way of example, the detection threshold reached for 3-methylbutan-1-ol is 0.03% (v/v). The quantitative aspect was approached with ethanol titration in a commercial white wine. Finally the repeatability relating to, on the one hand, the effective electrophoretic mobilities and, on the other hand, the corrected areas has also been studied.

Chromatography, Micellar Electrokinetic Capillary↗

PubMed2000

Syntheses of R and S isomers of AF-DX 384, a selective antagonist of muscarinic M2 receptors.

Enantiomers of 5,11-dihydro-11-[2-[2-[(N,N-dipropylaminomethyl)piperidin-1- yl]ethylamino]-carbonyl]-6H-pyrido[2,3-b][1,4]benzodiazepin-6-one (AF-DX 384) 1, have been synthesized from (S)-(+) and (R)-(-)-2-[N,N-dipropylaminomethyl]piperidine 4. The enantiomeric excess of 1 has been determined by capillary electrophoresis by using the alpha-highly sulphated cyclodextrin (alpha-HSCD) as chiral selector within the running electrolyte. (S)-(+)-(4) was prepared from (S)-(-)-pipecolic acid in a 4-step procedure (overall yield: 30%, ee: 99%) and (R)-(-)-AF-DX 384 from (R)-(+)-pipecolic acid. The (R)-(-) isomer exhibited in vitro a 23-fold higher affinity than its enantiomer (S)-(+) towards muscarinic receptors of subtype 2.

Animals↗