PubMed Health⌕ Search

Biomedical subjects

P Schaaf

Publications and source records attributed to P Schaaf.

At least 19 recordsLinked to original sources
PubMed2006

Multiple and time-scheduled in situ DNA delivery mediated by beta-cyclodextrin embedded in a polyelectrolyte multilayer.

The basic premise of gene therapy is that genes can be used to produce in situ therapeutic proteins. The controlled delivery of DNA complexes from biomaterials offers the potential to enhance gene transfer by maintaining an elevated concentration of DNA within the cellular microenvironment. Immobilization of the DNA to the substrate to which cells adhere maintains the DNA in the cell microenvironment for subsequent cellular internalization. Here, layer-by-layer (LBL) films made from poly(L-glutamic acid) (PLGA) and poly(L-lysine) (PLL) containing DNA were built in the presence of charged cyclodextrins. The biological activities of these polyelectrolyte films were tested by means of induced production of a specific protein in the nucleus or in the cytoplasm by cells in contact with the films. This type of coating offers the possibility for either simultaneous or sequential interfacial delivery of different DNA molecules aimed at cell transfection. These results open the route to numerous potential applications in patch vaccination, for example.

Animals↗
PubMed2006

Polyelectrolyte multilayer film coating and stability at the surfaces of oral prosthesis base polymers: an in vitro and in vivo study.

A new type of coating involving a layer-by-layer technique has been recently reported. This coating is composed of a polyelectrolyte multilayer film that confers specific properties on surfaces to which it is applied. Here, we studied the applicability of such a technique to the coating of oral prostheses, by first testing the construction of polyelectrolyte multilayer films on several polymers used in oral prosthesis bases, and, subsequently, by studying the stability of these coatings in vitro, in human saliva, and in vivo in a rat model. We demonstrated that the multilayered films are able to coat the surfaces of all tested polymers completely, thus increasing their wettability. We also showed that saliva does not degrade the film after 7 days in vitro and after 4 days in vivo. Taken together, our results establish that the layer-by-layer technique is suitable for the coating of oral devices.

Acrylates↗
PubMed2006

Initial adhesion of endothelial cells on polyelectrolyte multilayer films.

Polyelectrolyte multilayer films were recently investigated to favour attachment of Human Vein Umbilical Endothelial Cells (HUVECs) on non-adhesive surfaces. In this study, we evaluated the initial adhesion of HUVECs after 3 h of seeding on two polyelectrolyte multilayer films ending by poly(D-lysine) (PDL) or poly(allylamine hydrochloride) (PAH). In order to obtain information about initial adhesion of HUVECs, cell morphology as well as the expression of beta1 integrins, specific receptors of adhesion, were evaluated after 3 h of seeding on polyelectrolyte multilayer films. The data were also compared to PDL or PAH monolayers (polyelectrolytes terminating the multilayer architecture). The expression of beta1 integrins was not different, whatever are the studied surfaces. However, HUVECs spreading on polyelectrolyte multilayer films, in particular on PAH ending film, was more important as compared to polyelectrolyte monolayers or glass. In conclusion, the best initial adhesion conditions of HUVECs on polyelectrolyte films could not be elucidated, moreover the results suggested also that beta1 integrins could only play a limited role.

Actins↗
PubMed2005

Mechanically responsive films of variable hydrophobicity made of polyelectrolyte multilayers.

Mechanically responsive surfaces that allow to switch reversibly from a hydrophobic to a hydrophilic substrate are reported. The surfaces are constituted of polyelectrolyte multilayers deposited on modified charged silicone sheets. n bilayers of poly(allylamine)-Nafion (PAH-Naf) and m bilayers of poly(allylamine)-poly(acrylic acid) (PAH-PAA) composed the multilayers. A (PAH-Naf)(n) film possesses a water contact angle of around 105 degrees, whereas the contact angle of a (PAH-Naf)(4)-(PAH-PAA)(m) multilayer is around 50 degrees. When such a film with m < 5 and terminated by PAA is stretched out, its water contact angle increases up to around 100 degrees. Successive elongation/retraction cycles allow the water contact angle to alternate reversibly between 100 and 57 degrees indicating the reversible mechanical responsive nature of the film.

Letter↗
PubMed2005

Layer by layer self-assembled polyelectrolyte multilayers with embedded phospholipid vesicles obtained by spraying: integrity of the vesicles.

In a previous paper (Michel, M.; Vautier, D.; Voegel, J.-C.; Schaaf, P.; Ball, V. Langmuir 2004, 20, 4835), we showed that phospholipid vesicles can be incorporated into poly(glutamic-acid)/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films built by the alternated dipping of a surface in polyanion and polycation solutions. AFM imaging, quartz crystal microbalance, and ellipsometry suggested that the vesicles remain intact when adhering on the surface. In the present paper, we show that such films can also be realized by spraying both the polyelectrolyte solutions and the vesicles onto the surface. Using such vesicles filled with ferrocyanide ions, we prove by cyclic voltammetry that the sprayed vesicles remain intact when embedded in the multilayers. We show that multilayers containing two distinct layers of intact vesicles separated by several polyanion/polycation bilayers can also be constructed. Polyelectrolyte multilayers containing layers of phospholipid vesicles could act as reservoirs for drug or other biologically active molecules in controlled release bioactive coatings.

Electrochemistry↗
PubMed2005

Dipping versus spraying: exploring the deposition conditions for speeding up layer-by-layer assembly.

Polyelectrolyte film fabrication by successive spraying of polycation and polyanion solutions is described and compared to classic dipping. The poly(styrenesulfonate)/poly(allylamine) system is examined in detail. The influence of various parameters such as spraying time, polyelectrolyte concentration, and effect of film drying during multilayer construction is investigated. It is found that film deposition by spraying is easily controlled and very reliable. The thickness of the multilayers grows linearly with the number of deposition cycles similarly to what is observed when dipping substrates or when polyelectrolyte solutions flow over a surface. The assembly of films is very fast and leads to films with small surface roughness as estimated by atomic force microscopy and X-ray reflectometry. Spray deposition allows achieving regular multilayer growth even under conditions for which dipping fails to produce homogeneous films (e.g., extremely short contact times). Moreover, because drainage constantly removes a certain quantity of the excess material arriving at the surface, one can even skip the rinsing step and, thus, speed up even further the whole buildup process.

Journal Article↗
PubMed2005

Multivalent ion/polyelectrolyte exchange processes in exponentially growing multilayers.

We show, in this paper that multivalent ferrocyanide anions can penetrate into exponentially growing (PGA/PAH)n multilayer films whatever the nature of the last deposited layer. These ions are not able to diffuse out of the film when it is brought in contact with a pure buffer solution. However, the contact of this film with a poly(allylamine) (PAH) or a poly(L-glutamic acid) (PGA) solution leads to the release of ferrocyanide ions from the multilayer. It is shown that the release of ferrocyanide anions, when the film is in contact with a PGA solution, is due to the diffusion of the PGA chains into the film so that an exchange between ferrocyanide ions and PGA chains takes place inside the film. On the other hand, PAH chains do not diffuse into PGA/PAH multilayers. When the film is then brought in contact with a PAH solution, the PAH chains from the solution are expected to strongly interact with the ferrocyanide ions and thus induce a diffusion mechanism of the multivalent anions out of the film, the film/solution interface playing the role of a sink for these ions. This work thus shows that interactions between multivalent ions and exponentially growing films are much more complex than expected at first sight and that polyelectrolyte multilayers must be seen as dynamic entities in which diffusion and exchange processes can take place.

Adsorption↗
PubMed2005

Behaviour of endothelial cells seeded on thin polyelectrolyte multilayered films: a new biological scaffold.

The surface modification using thin polyelectrolyte multilayered films was proposed as a new scaffold material for different cell lines. In this study, we evaluated the possible use of polyelectrolyte multilayers as surface modification for the development of endothelial cells. In order to control the behaviour of endothelial cells, cell viability by MTT assay was studied. Moreover, the endothelial cell phenotype was checked and the expression of a leukocyte adhesion molecule (ICAM-1) was quantified. The behaviour of the cells on two polyelectrolyte multilayers was compared to cells on polystyrene, and two polyelectrolyte monolayers (terminating the multilayer architectures). The results have shown a better cell viability on the polyelectrolyte multilayers, inducing a higher cell number compared to polyelectrolyte monolayers after 1 and 3 days of culture. Moreover, the cells showed a normal morphology of cytoskeleton. The phenotype of the endothelial cells was kept and a low level of leukocyte adhesion molecules was observed. In conclusion, the polyelectrolyte multilayers can be considered as a potential surface modification procedure to enhance the development of endothelial cells on hydrophobic substrate and which can be applied to vascular tissue engineering.

Biocompatible Materials↗
PubMed2004

Polyelectrolyte multilayer films with pegylated polypeptides as a new type of anti-microbial protection for biomaterials.

Adhesion of bacteria at the surface of implanted materials is the first step in microbial infection, leading to post-surgical complications. In order to reduce this adhesion, we show that poly(L-lysine)/poly(L-glutamic acid) (PLL/PGA) multilayers ending by several PLL/PGA-g-PEG bilayers can be used, PGA-g-PEG corresponding to PGA grafted by poly(ethylene glycol). Streaming potential and quartz crystal microbalance-dissipation measurements were used to characterize the buildup of these films. The multilayer films terminated by PGA and PGA-g-PEG were found to adsorb an extremely small amount of serum proteins as compared to a bare silica surface but the PGA ending films do not reduce bacterial adhesion. On the other hand, the adhesion of Escherichia coli bacteria is reduced by 72% on films ending by one (PLL/PGA-g-PEG) bilayer and by 92% for films ending by three (PLL/PGA-g-PEG) bilayers compared to bare substrate. Thus, our results show the ability of PGA-g-PEG to be inserted into multilayer films and to drastically reduce both protein adsorption and bacterial adhesion. This kind of anti-adhesive films represents a new and very simple method to coat any type of biomaterials for protection against bacterial adhesion and therefore limiting its pathological consequences.

Adsorption↗
PubMed2004

Multilayer polyelectrolyte films functionalized by insertion of defensin: a new approach to protection of implants from bacterial colonization.

Infection of implanted materials by bacteria constitutes one of the most serious complications following prosthetic surgery. In the present study, we developed a new strategy based on the insertion of an antimicrobial peptide (defensin from Anopheles gambiae mosquitoes) into polyelectrolyte multilayer films built by the alternate deposition of polyanions and polycations. Quartz crystal microbalance and streaming potential measurements were used to follow step by step the construction of the multilayer films and embedding of the defensin within the films. Antimicrobial assays were performed with two strains: Micrococcus luteus (a gram-positive bacterium) and Escherichia coli D22 (a gram-negative bacterium). The inhibition of E. coli D22 growth at the surface of defensin-functionalized films was found to be 98% when 10 antimicrobial peptide layers were inserted in the film architecture. Noticeably, the biofunctionalization could be achieved only when positively charged poly(l-lysine) was the outermost layer of the film. On the basis of the results of bacterial adhesion experiments observed by confocal or electron microscopy, these observations could result from the close interaction of the bacteria with the positively charged ends of the films, which allows defensin to interact with the bacterial membrane structure. These results open new possibilities for the use of such easily built and functionalized architectures onto any type of implantable biomaterial. The modified surfaces are active against microbial infection and represent a novel means of local host protection.

Adsorption↗
PubMed2003

Lipoprotein risk factors for cardiovascular disease in patients with type 2 diabetes mellitus treated with oral antihyperglycaemic agents.

AIMS: To compare lipoprotein risk factors for cardiovascular disease (CVD) in patients with type 2 diabetes mellitus (DM) treated with a sulphonylurea (SU) compound only, metformin (MET) only, or combined SU + MET. METHODS: The study population consisted of 62 patients with type 2 DM, whose antihyperglycaemic treatment program had been stable for at least 3 months, divided into three groups: 26 patients in the SU group, 17 patients in the MET group and 19 patients in the SU + MET group. None of the patients were taking lipid-lowering drugs. Fasting venous blood samples were taken to measure concentrations of glucose, total cholesterol, triglycerides (TG), high-density lipoprotein-cholesterol (HDL-C), low-density lipoprotein-cholesterol (LDL-C) and remnant lipoprotein-cholesterol (RLP-C) as well as for determination of LDL particle diameter. RESULTS: The three groups were similar in terms of age, gender, body mass index and fasting plasma glucose concentrations. Total cholesterol concentrations were significantly lower (p < 0.05 for trend) in those treated with SU + MET as compared with the other two groups. However, there were no significant differences between the three groups in their plasma concentrations of TG, LDL-C, HDL-C or RLP-C; furthermore, the proportion of individuals within each treatment group with small LDL particle diameter was also not different. CONCLUSIONS: The lipoprotein profile of patients with type 2 DM, matched for level of fasting hyperglycaemia, was similar irrespective of treatment with SU alone, MET alone or SU + MET. Thus, we could not identify any changes in lipoprotein metabolism that could account for differences in risk of CVD as a function of treatment.

Blood Glucose↗
PubMed2003

Modeling of the detachment of a molecule from a surface: illustration of the "Bell-Evans effect".

This article deals with the modeling of the detachment of a molecule initially adsorbed on a surface and submitted to an external force whose strength increases with time. By means of an atomic force microscope (AFM), it is possible to measure the force when the molecule separates from the substrate. However, it is known that this force depends to a large extend on the rate at which the pulling force is applied ("Bell-Evans effect"). Two models are described to illustrate this behavior. First, a random walk approach is suggested to reveal the fundamental principle of the escape over a time-dependent energy barrier. Second, a multi bead-and-spring model is proposed to mimic the AFM experiment and numerical simulations, based on Brownian dynamics, are performed.

Binding Sites↗
PubMed2002

Molecular basis for the explanation of the exponential growth of polyelectrolyte multilayers.

The structure of poly(l-lysine) (PLL)/hyaluronan (HA) polyelectrolyte multilayers formed by electrostatic self-assembly is studied by using confocal laser scanning microscopy, quartz crystal microbalance, and optical waveguide lightmode spectroscopy. These films exhibit an exponential growth regime where the thickness increases exponentially with the number of deposited layers, leading to micrometer thick films. Previously such a growth regime was suggested to result from an "in" and "out" diffusion of the PLL chains through the film during buildup, but direct evidence was lacking. The use of dye-conjugated polyelectrolytes now allows a direct three-dimensional visualization of the film construction by introducing fluorescent polyelectrolytes at different steps during the film buildup. We find that, as postulated, PLL diffuses throughout the film down into the substrate after each new PLL injection and out of the film after each PLL rinsing and further after each HA injection. As PLL reaches the outer layer of the film it interacts with the incoming HA, forming the new HA/PLL layer. The thickness of this new layer is thus proportional to the amount of PLL that diffuses out of the film during the buildup step, which explains the exponential growth regime. HA layers are also visualized but no diffusion is observed, leading to a stratified film structure. We believe that such a diffusion-based buildup mechanism explains most of the exponential-like growth processes of polyelectrolyte multilayers reported in the literature.

Chemical Phenomena↗
PubMed2002

[Bioactive films for biomaterial coating and intended for tissue engineering: new original methods?].

Numerous functionalized biomaterials aimed to induce specific cellular or tissular responses have been developed in the last decade. They result often from a specific treatment of the interface of the material. Techniques like physisorption, covalent binding or deposition of a Langmuir-Blodgett film have been employed to modify surface properties. We describe here a novel approach based upon an alternated adsorption of polyelectrolytes (polyanions or polycations) leading to the build-up of a film. These films can be functionalized through protein insertion (ligands) or by covalent peptide bindings able to interact with cellular receptors. Combined with a high affinity for calcium or phosphate complexing properties such functionalized architectures could constitute an original way to favour osseointegration.

Adsorption↗
PubMed2001

Semi-automatized processing of AFM force-spectroscopy data.

Atomic force microscopy operated in the force-spectroscopy mode is now a widespread technique, often used to investigate ligand-receptor interactions with the goal of measuring forces at the individual molecule level. However, in an experiment, the simultaneous interaction of several ligand/receptor pairs cannot be excluded. This may produce complicated force curves, although unambiguous ruptures are sometimes observed. In the case of the non-specific adhesion of molecules, such as fibrinogen, to a surface, it is usually difficult to identify the real events on the force curves. This can render the application of fixed rules uneasy and in addition can introduce some degree of arbitrariness if the analysis has to be performed by hand. In the present paper a computer algorithm, aimed at speeding up the processing, and at applying selection rules in a reproducible manner, is proposed. It is applied to force recordings performed at various retraction velocities, thus various loading rates. The influence on the evaluation of the rupture forces of the different parameters that can be set by the operator is discussed.

Adsorption↗
PubMed2001

Peptide hormone covalently bound to polyelectrolytes and embedded into multilayer architectures conserving full biological activity.

We report the development of new bioactive coatings of biomaterials based on the alternate deposition of oppositely charged polyelectrolytes. We selected polylysine (PLL) and poly(glutamic acid) (PGA) for the polyelectrolytes and murine melanoma cells as a biological test model system. These cells respond specifically to a small peptide hormone, alpha-melanocortin, which is a potent stimulator of melanogenesis. We show that a synthetic alpha-melanocortin derivative, covalently coupled to PLL forming the outer layer of a multilayer film remains as biologically active as the free hormone. Furthermore, the long time activity of the hormone is maintained when embedded in multilayer architectures whereas its short time activity depends on integration depth. The embedding of bioactive molecules not only anchors them irreversibly on the biomaterial, but opens also the possibility to control their activity. In comparison to conventional coating methods, polyelectrolyte multilayers are easy to prepare and retain their biological activity after storage as dry material. These very flexible systems allow broad medical applications for implant and tissue engineering.

Animals↗
PubMed2001

Relationship between insulin resistance, weight loss, and coronary heart disease risk in healthy, obese women.

Several popular books have recently been published stating that being insulin-resistant favors weight gain and/or prevents weight loss. Because this view seems to have gained widespread support in the general population, we thought it important to perform the current study testing the hypothesis that differences in insulin-mediated glucose disposal do not affect weight loss in response to calorie-restricted diets. For this purpose, we studied the change in weight and risk factors for coronary heart disease (CHD) in healthy women volunteers, defined as being obese on the basis of a body mass index (BMI) greater than 30.0 kg/m(2). The insulin suppression test was used to stratify obese women at baseline into insulin-resistant and insulin-sensitive subgroups on the basis of their steady-state plasma glucose (SSPG) concentration at the end of a 180-minute infusion of octreotide, exogenous insulin, and glucose. They were then instructed on a calorie-restricted diet plus sibutraminine (15 mg/day) for a total period of 4 months. Baseline measurements also included determination of fasting lipid and lipoprotein concentrations, and hourly (8 AM to 4 PM) determinations of plasma glucose and insulin concentrations before and after breakfast and lunch. Twenty-four women completed the 4-month period of calorie restriction: 13 classified as insulin-resistant (SSPG = 219 +/- 7 mg/dL) and 11 as insulin-sensitive (SSPG = 69 +/- 6 mg/dL). The insulin-resistant group also had higher (P =.03) plasma triglyceride (TG) concentrations and a higher ratio of total to high-density lipoprotein (HDL) cholesterol concentration (P =.02) at baseline. Both groups lost a significant amount of weight during the study, and there was no difference between the weight loss in the insulin-resistant (8.6 +/- 1.3 kg) and insulin-sensitive (7.9 +/- 1.4 kg) groups. Weight loss in the insulin-resistant group was also associated with a significant decrease in SSPG concentration (219 +/- 7 to 144 +/- 14 mg/dL), associated with significantly lower fasting TG concentrations (P <.001) and day-long concentrations of plasma glucose and insulin (P <.005). None of these variables changed in the insulin-sensitive group. These results indicate that: (1) CHD risk factors in obese women vary as a function of being insulin-resistant or insulin-sensitive; (2) dramatic variations in insulin-mediated glucose disposal do not modulate weight loss in response to calorie-restricted diets, and (3) weight loss is effective in reducing CHD risk in insulin-resistant, obese women. Given these data, it seems obvious that attempts to reduce CHD risk factors by weight loss should focus on obese individuals who are also insulin-resistant.

Appetite Depressants↗