PubMed Health⌕ Search

Biomedical subjects

Peter Hinterdorfer

Publications and source records attributed to Peter Hinterdorfer.

At least 19 recordsLinked to original sources

Plant-derived recombinant macromolecular PAP-IgG Fc as a novel prostate cancer vaccine candidate eliciting robust immune responses.

Prostatic acid phosphatase (PAP) is a specific protein that is highly expressed in prostate cancer. In this study, we constructed two recombinant PAP fusion genes: PAP fused to the immunoglobulin G (IgG) Fc fragment (designated PAP-Fc) and PAP-Fc fused to the endoplasmic reticulum retention sequence KDEL (designated PAP-FcK). Transgenic Nicotiana tabacum plants expressing these recombinant macromolecular proteins (MPs) were generated using Agrobacterium-mediated transformation, and the presence of both genes was confirmed through genomic PCR. Western blot analysis validated the expression of PAP-Fc and PAP-FcK MPs, which were successfully purified via protein A affinity chromatography. Size-exclusion high-performance liquid chromatography revealed dimeric peaks for PAP-Fc (PAP-FcP) and PAP-FcK (PAP-FcKP). Bio-transmission electron microscopy demonstrated 'Y'-shaped protein particles resembling antibody structures. Moreover, PAP-FcP and PAP-FcKP exhibited a high association rate with human FcγR and FcRn. Vaccination of mice with both PAP-FcP and PAP-FcKP resulted in increased total IgG against PAP and enhanced activation of CD4+ T cells, comparable to mice immunized with PAP, which served as a positive control. These findings indicate that both plant-derived MPs can effectively induce adaptive immunity, positioning them as promising candidates for prostate cancer vaccines. Overall, plants expressing PAP-Fc and PAP-FcK represent a viable production system for antigenic macromolecule-based prostate cancer vaccines.

Male↗

Age determination of blood spots in forensic medicine by force spectroscopy.

We present a new tool for the estimation of the age of bloodstains, which could probably be used during forensic casework. For this, we used atomic force microscopy (AFM) for high-resolution imaging of erythrocytes in a blood sample and the detection of elasticity changes on a nanometer scale. For the analytic procedure we applied a fresh blood spot on a glass slide and started the AFM detection after drying of the blood drop. In a first step, an overview image was generated showing the presence of several red blood cells, which could easily be detected due to their typical "doughnut-like" appearance. The consecutively morphological investigations in a timeframe of 4 weeks could not show any alterations. Secondly, AFM was used to test the elasticity by recording force-distance curves. The measurements were performed immediately after drying, 1.5 h, 30 h and 31 days. The conditions were kept constant at room temperature (20 degrees C) and a humidity of 30%. The obtained elasticity parameters were plotted against a timeline and repeated several times. The elasticity pattern showed a decrease over time, which are most probably influenced by the alteration of the blood spot during the drying and coagulation process. The preliminary data demonstrates the capacity of this method to use it for development of calibration curves, which can be used for estimation of bloodstain ages during forensic investigations.

Blood Coagulation↗

Ligands on the string: single-molecule AFM studies on the interaction of antibodies and substrates with the Na+-glucose co-transporter SGLT1 in living cells.

Atomic force microscopy (AFM) was used to probe topology, conformational changes and initial substrate-carrier interactions of Na+-glucose co-transporter (SGLT1) in living cells on a single-molecule level. By scanning SGLT1-transfected Chinese hamster ovary (CHO) cells with AFM tips carrying an epitope-specific antibody directed against the extramembranous C-terminal loop 13, significant recognition events could be detected. Specificity was confirmed by the absence of events in nontransfected CHO cells and by the use of free antigen and free antibody superfusion. Thus, contrary to computer predictions on SGLT1 topology, loop 13 seems to be part of the extracellular surface of the transporter. Binding probability of the antibody decreased upon addition of phlorizin, a specific inhibitor of SGLT1, suggesting a considerable conformational change of loop 13 when the inhibitor occludes the sugar translocation pathway. Using an AFM tip carrying 1-thio-D-glucose, direct evidence could be obtained that in the presence of Na+ a sugar-binding site appears on the transporter surface. The binding site accepts the sugar residue of the glucoside phlorizin, free D-glucose, and D-galactose, but not free L-glucose and probably represents the first of several selectivity filters of the transporter. This work demonstrates the potential of AFM to study the presence and dynamics of plasma membrane transporters in intact cells on the single molecule level.

Animals↗

A combined optical and atomic force microscope for live cell investigations.

We present an easy-to-use combination of an atomic force microscope (AFM) and an epi-fluorescence microscope, which allows live cell imaging under physiological conditions. High-resolution AFM images were acquired while simultaneously monitoring either the fluorescence image of labeled membrane components, or a high-contrast optical image (DIC, differential interference contrast). By applying two complementary techniques at the same time, additional information and correlations between structure and function of living organisms were obtained. The synergy effects between fluorescence imaging and AFM were further demonstrated by probing fluorescence-labeled receptor clusters in the cell membrane via force spectroscopy using antibody-functionalized tips. The binding probability on receptor-containing areas identified with fluorescence microscopy ("receptor-positive sites") was significantly higher than that on sites lacking receptors.

Animals↗

Glass surfaces grafted with high-density poly(ethylene glycol) as substrates for DNA oligonucleotide microarrays.

Surfaces carrying a dense layer of poly(ethylene glycol) (PEG) were prepared, characterized, and tested as substrates for DNA oligonucleotide microarrays. PEG bis(amine) with a molecular weight of 2000 was grafted onto silanized glass slides bearing aldehyde groups. After grafting, the terminal amino groups of the PEG layer were derivatized with the heterobifunctional cross-linker succinimidyl 4-[p-maleimidophenyl]butyrate to permit the immobilization of thiol-modified DNA oligonucleotides. The stepwise chemical modification was validated with X-ray photoelectron spectroscopy. Goniometry indicated that the PEG grafting procedure reduced surface inhomogeneities present after the silanization step, while atomic force microscopy and ellipsometry confirmed that the PEG layer was dense and monomolecular. Hybridization assays using DNA oligonucleotides and fluorescence imaging showed that PEG grafting improved the yield in hybridization 4-fold compared to non-PEGylated maleimide-derivatized surfaces. In addition, the PEG layer reduced the nonspecific adsorption of DNA by a factor of up to 13, demonstrating that surfaces with a dense PEG layer represent suitable substrates for DNA oligonucleotide microarrays.

Coated Materials, Biocompatible↗

Molecular recognition imaging and force spectroscopy of single biomolecules.

In recent years, considerable attention has focused on biological applications of the atomic force microscope (AFM), in particular on high-resolution imaging of individual biological molecules and on the measurement of molecular forces under near-physiological conditions. The detection of intermolecular forces in the piconewton range has paved the way to investigate details on structural parameters of the binding pockets and the energy landscapes of many biomolecular interactions. The capability of AFM to resolve nanometer-sized details, together with its force detection sensitivity, led to the development of molecular recognition imaging. By a combination of topographical imaging with force measurements, receptor sites are localized with nanometer accuracy. Topography and recognition of target molecules are thereby simultaneously mapped. Thus the AFM can identify specific components in a complex biological sample and retain its high resolution in imaging.

Aluminum Silicates↗

Detection and localization of single molecular recognition events using atomic force microscopy.

Because of its piconewton force sensitivity and nanometer positional accuracy, the atomic force microscope (AFM) has emerged as a powerful tool for exploring the forces and the dynamics of the interaction between individual ligands and receptors, either on isolated molecules or on cellular surfaces. These studies require attaching specific biomolecules or cells on AFM tips and on solid supports and measuring the unbinding forces between the modified surfaces using AFM force spectroscopy. In this review, we describe the current methodology for molecular recognition studies using the AFM, with an emphasis on strategies available for preparing AFM tips and samples, and on procedures for detecting and localizing single molecular recognition events.

Animals↗

Directed assembly of Au nanoparticles onto planar surfaces via multiple hydrogen bonds.

We have developed a new concept to effect nanoparticle binding on surfaces by use of directed, specific molecular interactions. Hamilton-type receptors displaying a binding strength of approximately 10(5) M(-)(1) were covalently fixed onto self-assembled monolayers via Sharpless-type "click" reactions, thus representing an efficient method to control the densities of ligands over a range from low to complete surface coverage. Au nanoparticles covered with the matching barbituric acid receptors bound with high selectivity onto this surface by a self-assembly process mediated by multiple hydrogen bonds. The binding process was investigated with atomic force microscopy. Moderate control of particle density was achieved by controlling the receptor density on the self-assembled monolayer surface. The method opens a general approach to nanoparticle and small object binding onto patterned surfaces.

Journal Article↗

Structure and distribution of the Bacillus thuringiensis Cry4Ba toxin in lipid membranes.

Bacillus thuringiensis Cry delta-endotoxins cause death of susceptible insect larvae by forming lytic pores in the midgut epithelial cell membranes. The 65 kDa trypsin activated Cry4Ba toxin was previously shown to be capable of permeabilizing liposomes and forming ionic channels in receptor-free planar lipid bilayers. Here, magnetic ACmode (MACmode) atomic force microscopy (AFM) was used to characterize the lateral distribution and the native molecular structure of the Cry4Ba toxin in the membrane. Liposome fusion and the Langmuir-Blodgett technique were employed for supported lipid bilayer preparations. The toxin preferentially inserted in a self-assembled structure, rather than as a single monomeric molecule. In addition, the spontaneous insertion into receptor-free lipid bilayers lead to formation of characteristic pore-like structures with four-fold symmetry, suggesting that tetramers are the preferred oligomerization state of this toxin.

Animals↗

Membrane binding of beta2-glycoprotein I can be described by a two-state reaction model: an atomic force microscopy and surface plasmon resonance study.

Complexes formed between beta2GPI (beta2-glycoprotein I), a human plasma protein, and biological membranes are considered to be targets of macrophages and antiphospholipid autoantibodies involved in autoimmune diseases, such as antiphospholipid syndrome or systemic lupus erythematosus. The positively charged lysine-rich fifth domain of beta2GPI facilitates its interaction with phospholipid membranes containing acidic phospholipids, which normally become exposed by apoptotic processes. In the present study, atomic force microscopy was applied to visualize the binding of beta2GPI to a mixed phospholipid model membrane at physiological ionic strength. On supported lipid bilayers the formation of supramolecular assemblies of the protein with a height of approx. 3.3 nm was observed, suggesting a lateral agglomeration of beta2GPI. Detailed analysis of kinetic constants using surface plasmon resonance revealed that the binding can be described by a two-state reaction model, i.e. a very fast interaction step, depending on the content of acidic phospholipids in the bilayer, and a second step with significantly lower k(on) and k(off) values. Taken together, our results suggest a biphasic interaction mechanism: a fast step of beta2GPI binding to negatively charged lipids, mainly based on electrostatic interactions, and a slower phase of agglomeration of the protein on the bilayer surface accompanied by a protein-induced rigidification of the membrane, as revealed by electron paramagnetic resonance.

Cell Membrane↗

Single molecule studies of antibody-antigen interaction strength versus intra-molecular antigen stability.

We investigated molecular recognition of antibodies to membrane-antigens and extraction of the antigens out of membranes at the single molecule level. Using dynamic force microscopy imaging and enzyme immunoassay, binding of anti-sendai antibodies to sendai-epitopes genetically fused into bacteriorhodopsin molecules from purple membranes were detected under physiological conditions. The antibody/antigen interaction strength of 70-170 pN at loading rates of 2-50 nN/second yielded a barrier width of x = 0.12 nm and a kinetic off-rate (corresponding to the barrier height) of k(off) = 6s(-1), respectively. Bacteriorhodopsin unfolding revealed a characteristic intra-molecular force pattern, in which wild-type and sendai-bacteriorhodopsin molecules were clearly distinguishable in their length distributions, originating from the additional 13 amino acid residues epitope in sendai purple membranes. The inter-molecular antibody/antigen unbinding force was significantly lower than the force required to mechanically extract the binding epitope-containing helix pair out of the membrane and unfold it (126 pN compared to 204 pN at the same loading rate), meeting the expectation that inter-molecular unbinding forces are weaker than intra-molecular unfolding forces responsible for stabilizing native conformations of proteins.

Antibodies↗

Detection of HSP60 on the membrane surface of stressed human endothelial cells by atomic force and confocal microscopy.

The highly conserved and ubiquitous heat shock proteins (HSP) are essential for the cellular homeostasis and efficiently trigger cellular responses to stress conditions. Both microbial and human HSP act as dominant antigens in numerous infectious and autoimmune diseases such as atherosclerosis, inducing a strong immune-inflammatory response. In the present study, the surface localization of HSP60 on stressed and unstressed human umbilical venous endothelial cells (HUVECs) was investigated using sensitive high resolution microscopy methods and flow cytometry. Confocal laser scanning microscopy (CLSM) revealed an increase of HSP60 in the mitochondria and on the surface of heat-stressed living and fixed HUVECs compared to unstressed cells. Atomic force microscopy (AFM), which has developed as sensitive surface-probe technique in biology, confirmed the presence of HSP60 on the membrane of stressed cells at an even higher lateral resolution by detecting specific single molecule binding events between the monoclonal antibody AbII-13 tethered to AFM tips and HSP60 molecules on cells. The interaction force (force required to break a single AbII-13/HSP60 bond) was 59+/-2 pN, which correlated nicely to the 51+/-1 pN measured with isolated HSP60 attached to mica surfaces. Overall, we found clear evidence for the occurrence of HSP60 on the surface of stressed HUVECs in a very similar patchy distribution pattern in living and fixed cells. The relevance of our findings with respect to the role of HSP60 in atherogenesis is discussed.

Antibodies, Monoclonal↗

Visualization of single receptor molecules bound to human rhinovirus under physiological conditions.

Dynamic force microscopy (DFM) was used to image human rhinovirus HRV2 alone and complexed with single receptor molecules under near physiological conditions. Specific and site-directed immobilization of HRV2 on a model cell membrane resulted in a crystalline arrangement of virus particles with hexagonal symmetry and 35 nm spacing. High-resolution imaging of the virus capsid revealed about 20 resolvable structural features with 3 nm diameters; this finding is in agreement with protrusions seen by cryo-electron microscopy. Binding of receptor molecules to individual virus particles was observed after injection of soluble receptors into the liquid cell. Virus-receptor complexes with zero, one, two, or three attached receptor molecules were resolved. The number of receptor molecules associated to virions increased over time. Occasionally, dissociation of single receptor molecules from viral particles was also observed.

Capsid↗

Direct measurement of protein energy landscape roughness.

The energy landscape of proteins is thought to have an intricate, corrugated structure. Such roughness should have important consequences on the folding and binding kinetics of proteins, as well as on their equilibrium fluctuations. So far, no direct measurement of protein energy landscape roughness has been made. Here, we combined a recent theory with single-molecule dynamic force spectroscopy experiments to extract the overall energy scale of roughness epsilon for a complex consisting of the small GTPase Ran and the nuclear transport receptor importin-beta. The results gave epsilon > 5k(B)T, indicating a bumpy energy surface, which is consistent with the ability of importin-beta to accommodate multiple conformations and to interact with different, structurally distinct ligands.

Models, Molecular↗

Oriented binding of the His6-tagged carboxyl-tail of the L-type Ca2+ channel alpha1-subunit to a new NTA-functionalized self-assembled monolayer.

Oriented stable binding of functional proteins on surfaces is of fundamental interest for receptor/ligand studies in atomic force microscopy (AFM) and surface plasmon resonance (SPR) experiments. Here we have chosen the His6-tagged carboxyl-tail (C-tail) of the alpha1c-subunit of the L-type Ca2+ channel and calmodulin (CaM) as its cognitive partner as a model system to develop a new functional surface. Covalently attached self-assembled monolayers on ultraflat gold containing NTA-thiols to which the His6-tagged C-tail was bound and thiols with triethylene-glycol groups as matrix-thiols represented the system of choice. The topography of this surface was characterized using AFM; its ability to bind C-tail proteins oriented and stable was confirmed by SPR measurements and by complementary force spectroscopy experiments with a CaM4-construct covalently attached to the tip. The developed anchoring strategy can now be used to study receptor/ligand interactions in general applying force spectroscopy and SPR on His6-tagged proteins oriented immobilized onto this new NTA-functionalized self-assembled monolayer.

Journal Article↗