PubMed Health⌕ Search

Biomedical subjects

Peter Hinterdorfer

Publications and source records attributed to Peter Hinterdorfer.

At least 37 records · Page 2Linked to original sources

Dynamic force microscopy for imaging of viruses under physiological conditions.

Dynamic force microscopy (DFM) allows imaging of the structure and the assessment of the function of biological specimens in their physiological environment. In DFM, the cantilever is oscillated at a given frequency and touches the sample only at the end of its downward movement. Accordingly, the problem of lateral forces displacing or even destroying bio-molecules is virtually inexistent as the contact time and friction forces are reduced. Here, we describe the use of DFM in studies of human rhinovirus serotype 2 (HRV2) weakly adhering to mica surfaces. The capsid of HRV2 was reproducibly imaged without any displacement of the virus. Release of the genomic RNA from the virions was initiated by exposure to low pH buffer and snapshots of the extrusion process were obtained. In the following, the technical details of previous DFM investigations of HRV2 are summarized.

Journal Article↗

Following single antibody binding to purple membranes in real time.

Antibody binding to surface antigens in membranes is the primary event in the specific immune defence of vertebrates. Here we used force microscopy to study the dynamics of antibody recognition of mutant purple membranes from Halobacterium salinarum containing a genetically appended anti-Sendai recognition epitope. Ligation of individual anti-Sendai antibodies to their antigenic epitopes was observed over time. Their increase in number within a small selected area revealed an apparent kinetic on-rate. The membrane-bound antibodies showed many different conformations that ranged from globular to V- and Y-like shapes. The maximum distance of two Fab fragments of the same antibody was observed to be approximately 18 nm, indicating an overall strong intrinsic flexibility of the antibody hinge region. Fab fragments of bound anti-Sendai antibodies were allocated to antigenic sites of the purple membrane, allowing the identification and localization of individual recognition epitopes on the surface of purple membranes.

Antibodies, Monoclonal↗

Monitoring of glass derivatization with pulsed force mode atomic force microscopy.

Non-specific adsorption of proteins at solid/liquid interfaces is a major problem in the use of synthetic biomaterials and in ultrasensitive detection methods. Grafting surfaces with a dense layer of poly(ethylene glycol) (PEG) or other polymers is a most widely used strategy to solve this task. While such modified surfaces have been characterized by their ability to resist protein adsorption, the polymer layers themselves have rarely been studied in fine detail. Atomic force microscopy (AFM) using the pulsed force mode (PFM), is an ideal technique to investigate structural features and physiochemical properties of surfaces because topology and adhesion are simultaneously detected with high lateral resolution. In the present study, PFM-AFM was applied to thoroughly characterize different stages of glass derivatization, up to the formation of a dense PEG layer. Lateral inhomogeneities in topology and/or adhesion were observed at all stages before PEG attachment. The covalently bound PEG, however, was seen to form a densely packed monolayer with maximal thickness, smooth surface, and weak adhesion. Thus, PFM-AFM appears to be a valuable tool for the characterization of protein-repelling surfaces in solution.

Adhesiveness↗

Hydrodynamic damping of a magnetically oscillated cantilever close to a surface.

We studied the frequency response of a magnetically driven atomic force microscope (AFM) cantilever close to a sample surface in liquids. Amplitude-frequency (tuning) curves showed pronounced differences in dependence on the tip-sample separation (from 1 to 50 microm), with significant shifts of the resonance peak. A model was developed in which the cantilever was described in a full shape manner and the hydrodynamic forces acting on the cantilever were approximately calculated. The slight inclination of the cantilever to the surface (alpha approximately 15 degrees) leads to a force profile along the cantilever. Therefore, the mathematical problem can be strictly solved only numerically. For an approximate analytical solution, the hydrodynamic force profile was approximated by a constant force along the cantilever for large separations and by a point force acting on the tip of the cantilever for small separations. The theoretical results calculated within this model agreed well with the experimental data and allowed to determine the cantilever mass in liquid M*, the joint mass at the tip end m*t, and the coefficient of viscous interaction of the cantilever with free liquid, gamma(infinity).

Journal Article↗

Identification of the human rhinovirus serotype 1A binding site on the murine low-density lipoprotein receptor by using human-mouse receptor chimeras.

Human rhinovirus serotype 1A (HRV1A) binds more strongly to the mouse low-density lipoprotein receptor (LDLR) than to the human homologue (M. Reithmayer, A. Reischl, L. Snyers, and D. Blaas, J. Virol. 76:6957-6965, 2002). Here, we used this fact to determine the binding site of HRV1A by replacing selected ligand binding modules of the human receptor with the corresponding ligand binding modules of the mouse receptor. The chimeric proteins were expressed in mouse fibroblasts deficient in endogenous LDLR and LDLR-related protein, both used by minor group HRVs for cell entry. Binding was assessed by virus overlay blots, by immunofluorescence microscopy, and by measuring cell attachment of radiolabeled virus. Replacement of ligand binding repeat 5 of the human LDLR with the corresponding mouse sequence resulted in a substantial increase in HRV1A binding, whereas substitution of repeats 3 and 4 was without effect. Replacement of human receptor repeats 1 and 2 with the murine homologues also increased virus binding. Finally, murine receptor modules 1, 2, and 5 simultaneously introduced into the human receptor resulted in HRV1A binding indistinguishable from mouse wild-type receptor. Thus, repeats 1 and/or 2 and repeat 5 are involved in HRV1A attachment. Changing CDGGPD in the acidic cluster of module 5 in the human receptor to CDGEAD present in the mouse receptor led to substantially increased binding of HRV1A, indicating an important role of the glutamate residue in HRV1A recognition.

Amino Acid Sequence↗

Monitoring RNA release from human rhinovirus by dynamic force microscopy.

Human rhinoviruses were imaged under physiological conditions by dynamic force microscopy. Topographical images revealed various polygonal areas on the surfaces of the 30-nm viral particles. RNA release was initiated by exposure to a low-pH buffer. The lengths of the RNAs that were released but still connected to the virus capsid varied between 40 and 330 nm, whereas RNA molecules that were completely released from the virus were observed with lengths up to 1 micro m. Fork-like structure elements with 30-nm extensions were sometimes resolved at one end of the RNA molecules. They possibly correspond to the characteristic multi-stem-loop conformation, the internal ribosomal entry site, located at the 5' region of the genome. This study demonstrates that dynamic force microscopy can be used to study viral RNA release in situ under physiological conditions.

Capsid↗

Imaging morphological details and pathological differences of red blood cells using tapping-mode AFM.

The surface topography of red blood cells (RBCs) was investigated under near-physiological conditions using atomic force microscopy (AFM). An immobilization protocol was established where RBCs are coupled via molecular bonds of the membrane glycoproteins to wheat germ agglutinin (WGA), which is covalently and flexibly tethered to the support. This results in a tight but non-invasive attachment of the cells. Using tapping-mode AFM, which is known as gentle imaging mode and therefore most appropriate for soft biological samples like erythrocytes, it was possible to resolve membrane skeleton structures without major distortions or deformations of the cell surface. Significant differences in the morphology of RBCs from healthy humans and patients with systemic lupus erythematosus (SLE) were observed on topographical images. The surface of RBCs from SLE patients showed characteristic circular-shaped holes with approx. 200 nm in diameter under physiological conditions, a possible morphological correlate to previously published changes in the SLE erythrocyte membrane.

Erythrocyte Membrane↗

Direct discrimination between models of protein activation by single-molecule force measurements.

The limitations imposed on the analyses of complex chemical and biological systems by ensemble averaging can be overcome by single-molecule experiments. Here, we used a single-molecule technique to discriminate between two generally accepted mechanisms of a key biological process--the activation of proteins by molecular effectors. The two mechanisms, namely induced-fit and population-shift, are normally difficult to discriminate by ensemble approaches. As a model, we focused on the interaction between the nuclear transport effector, RanBP1, and two related complexes consisting of the nuclear import receptor, importin beta, and the GDP- or GppNHp-bound forms of the small GTPase, Ran. We found that recognition by the effector proceeds through either an induced-fit or a population-shift mechanism, depending on the substrate, and that the two mechanisms can be differentiated by the data.

Elasticity↗

Simultaneous topography and recognition imaging using force microscopy.

We present a method for simultaneously recording topography images and localizing specific binding sites with nm positional accuracy by combining dynamic force microscopy with single molecule recognition force spectroscopy. For this we used lysozyme adsorbed to mica, the functionality of which was characterized by enzyme immunoassays. The topography and recognition images were acquired using tips that were magnetically oscillated during scanning and contained antibodies directed against lysozyme. For cantilevers with low Q-factor (approximately 1 in liquid) driven at frequencies below resonance, the surface contact only affected the downward deflections (minima) of the oscillations, whereas binding of the antibody on the tip to lysozyme on the surface only affected the upwards deflections (maxima) of the oscillations. The recognition signals were therefore well separated from the topographic signals, both in space (Delta z approximately 5 nm) and time (approximately 0.1 ms). Topography and recognition images were simultaneously recorded using a specially designed electronic circuit with which the maxima (U(up)) and the minima (U(down)) of each sinusoidal cantilever deflection period were depicted. U(down) was used for driving the feedback loop to record the height (topography) image, and U(up) provided the data for the recognition image.

Aluminum Silicates↗

A molecular switch between alternative conformational states in the complex of Ran and importin beta1.

Several million macromolecules are exchanged each minute between the nucleus and cytoplasm by receptor-mediated transport. Most of this traffic is controlled by the small GTPase Ran, which regulates assembly and disassembly of the receptor-cargo complexes in the appropriate cellular compartment. Here we applied dynamic force spectroscopy to study the interaction of Ran with the nuclear import receptor importin beta1 (impbeta) at the single-molecule level. We found that the complex alternates between two distinct conformational states of different adhesion strength. The application of an external mechanical force shifts equilibrium toward one of these states by decreasing the height of the interstate activation energy barrier. The other state can be stabilized by a functional Ran mutant that increases this barrier. These results support a model whereby functional control of Ran-impbeta is achieved by a population shift between pre-existing alternative conformations.

Guanosine Diphosphate↗

Ca(++)-dependent vesicle release from erythrocytes involves stomatin-specific lipid rafts, synexin (annexin VII), and sorcin.

Cytosolic Ca(++) induces the shedding of microvesicles and nanovesicles from erythrocytes. Atomic force microscopy was used to determine the sizes of these vesicles and to resolve the patchy, fine structure of the microvesicle membrane. The vesicles are highly enriched in glycosyl phosphatidylinositol-linked proteins, free of cytoskeletal components, and depleted of the major transmembrane proteins. Both types of vesicles contain 2 as-yet-unrecognized red cell proteins, synexin and sorcin, which translocate from the cytosol to the membrane upon Ca(++) binding. In nanovesicles, synexin and sorcin are the most abundant proteins after hemoglobin. In contrast, the microvesicles are highly enriched in stomatin. The membranes of both microvesicles and nanovesicles contain lipid rafts. Stomatin is the major protein of the microvesicular lipid rafts, whereas synexin and sorcin represent the major proteins of the nanovesicular rafts in the presence of Ca(++). Interestingly, the raft proteins flotillin-1 and flotillin-2 are not found in the vesicles but remain in the red cell membrane. These data indicate the presence of different types of lipid rafts in the erythrocyte membrane with distinct fates after Ca(++) entry. Synexin, which is known to be vital to the process of membrane fusion, is suggested to be a key component in the process of vesicle release from erythrocytes.

Acetylcholinesterase↗

Single molecule recognition of protein binding epitopes in brush border membranes by force microscopy.

Sidedness and accessibility of protein epitopes in intact brush border membrane vesicles were analyzed by detecting single molecule interaction forces using molecular recognition force microscopy in aqueous physiological solutions. Frequent antibody-antigen recognition events were observed with a force microscopy tip carrying an antibody directed against the periplasmically located gamma-glutamyltrans- peptidase, suggesting a right side out orientation of the vesicles. Phlorizin attached to the tips bound to NA+/D-glucose cotransporter molecules present in the vesicles. The recognition was sodium dependent and inhibited by free phlorizin and D-glucose, and revealed an apparent K(D) of 0.2 microM. Binding events were also observed with an antibody directed against the epitope aa603-aa630 close to the C terminus of the transporter. In the presence of phlorizin the probability of antibody binding was reduced but the most probable unbinding force f(u) = 100 pN remained unchanged. In the presence of D-glucose and sodium, however, both the binding probability and the most probable binding force (f(u) = 50 pN) were lower than in its absence. These studies demonstrate that molecular recognition force microscopy is a versatile tool to probe orientation and conformational changes of epitopes of membrane components during binding and trans-membrane transport.

Animals↗

Biomolecular force measurements and the atomic force microscope.

The atomic force microscope (AFM) is a surface-sensitive instrument capable of imaging biological samples at nanometer resolution in all environments including liquids. The sensitivity of the AFM cantilever, to forces in the pico Newton range, has been exploited to measure breakaway forces between biomolecules and to measure folding-unfolding forces within single proteins. By attaching specific antibodies to cantilevers the simultaneous imaging of target antigens and identification of antigen-antibody interactions have been demonstrated.

Microscopy, Atomic Force↗

Dynamic force microscopy imaging of native membranes.

We employed magnetic ACmode atomic force microscopy (MACmode AFM) as a novel dynamic force microscopy method to image surfaces of biological membranes in their native environments. The lateral resolution achieved under optimized imaging conditions was in the nanometer range, even when the sample was only weakly attached to the support. Purple membranes (PM) from Halobacterium salinarum were used as a test standard for topographical imaging. The hexagonal arrangement of the bacteriorhodopsin trimers on the cytoplasmic side of PM was resolved with 1.5nm lateral accuracy, a resolution similar to images obtained in contact and tapping-mode AFM. Human rhinovirus 2 (HRV2) particles were attached to mica surfaces via nonspecific interactions. The capsid structure and 2nm sized protein loops of HRV2 were routinely obtained without any displacement of the virus. Globular and filamentous structures on living and fixed endothelial cells were observed with a resolution of 5-20nm. These examples show that MACmode AFM is a favorable method in studying the topography of soft and weakly attached biological samples with high resolution under physiological conditions.

Capsid↗

Antibody linking to atomic force microscope tips via disulfide bond formation.

Covalent binding of bioligands to atomic force microscope (AFM) tips converts them into monomolecular biosensors by which cognate receptors can be localized on the sample surface and fine details of ligand-receptor interaction can be studied. Tethering of the bioligand to the AFM tip via a approximately 6 nm long, flexible poly(ethylene glycol) linker (PEG) allows the bioligand to freely reorient and to rapidly "scan" a large surface area while the tip is at or near the sample surface. In the standard coupling scheme, amino groups are first generated on the AFM tip. In the second step, these amino groups react with the amino-reactive ends of heterobifunctional PEG linkers. In the third step, the 2-pyridyl-S-S groups on the free ends of the PEG chains react with protein thiol groups to give stable disulfide bonds. In the present study, this standard coupling scheme has been critically examined, using biotinylated IgG with free thiols as the bioligand. AFM tips with PEG-tethered biotin-IgG were specifically recognized by avidin molecules that had been adsorbed to mica surfaces. The unbinding force distribution showed three maxima that reflected simultaneous unbinding of 1, 2, or 3 IgG-linked biotin residues from the avidin monolayer. The coupling scheme was well-reproduced on amino-functionalized silicon nitride chips, and the number of covalently bound biotin-IgG per microm2 was estimated by the amount of specifically bound ExtrAvidin-peroxidase conjugate. Coupling was evidently via disulfide bonds, since only biotin-IgG with free thiol groups was bound to the chips. The mechanism of protein thiol coupling to 2-pyridyl-S-S-PEG linkers on AFM tips was further examined by staging the coupling step in bulk solution and monitoring turnover by release of 2-pyridyl-SH which tautomerizes to 2-thiopyridone and absorbs light at 343 nm. These experiments predicted 10(3)-fold slower rates for the disulfide coupling step than actually observed on AFM tips and silicon nitride chips. The discrepancy was reconciled by assuming 10(3)-fold enrichment of protein on AFM tips via preadsorption, as is known to occur on comparable inorganic surfaces.

Adsorption↗

Self-assembled monolayers with latent aldehydes for protein immobilization.

Aldehyde functions are widely used for immobilization of biomolecules on glass surfaces but have found little attention for biofunctionalization of self-assembled monolayers (SAMs) on gold, due to interference between thiol and aldehyde functions. This problem was recently solved by synthesis of an alkanethiol that carried a vicinal diol group [Jang et al. (2003) Nano Lett. 3, 691-694]. The latter served as a latent aldehyde function that was unmasked by short exposure of the vicinal diol-terminated SAM to aqueous periodate. However, the synthesis of the new vicinal diol-terminated alkane thiol was time-consuming and had an overall yield of approximately 3.5%. In the present study, a general modular strategy was introduced by which SAM components with vicinal diol functions were rapidly synthesized with high yield: this was accomplished by amide bond formation between a SAM-forming carboxylic acid (exemplified by lipoic acid and 16-mercaptohexadecanoic acid) with 3-aminopropane-1,2-diol, using suitable protecting groups. The disulfide or free thiol group afforded SAM formation on gold and, after periodate oxidation of the vicinal diol functions, proteins were covalently bound via their lysine residues. At 1 mg/mL protein concentration, complete surface coverage was reached within minutes. No further protein was bound by nonspecific adsorption, but cognate proteins were specifically bound with high capacity. Pyrogallol-O-hexadecanoic acid and 10-undecenoic acid were also coupled with 3-aminopropane-1,2-diol by amide bond formation, thereby producing latent aldehyde-containing SAM components for metal oxides and hydrogen-terminated silicon, respectively, to show the general usefulness of the new synthetic design.

Aldehydes↗