Biomedical subjects

Pierre Schaaf

Publications and source records attributed to Pierre Schaaf.

At least 19 recordsLinked to original sources

PubMed2007

Multifunctional polyelectrolyte multilayer films: combining mechanical resistance, biodegradability, and bioactivity.

Cross-linked polyelectrolyte multilayer films (CL PEM) have an increased rigidity and are mechanically more resistant than native (e.g., uncrosslinked) films. However, they are still biodegradable, which make them interesting candidates for biomedical applications. In this study, CL PEM films have been explored for their multifunctional properties as (i) mechanically resistant, (ii) biodegradable, and (iii) bioactive films. Toward this end, we investigated drug loading into CL chitosan/hyaluronan (CHI/HA) and poly(L-lysine)/hyaluronan (PLL/HA) films by simple diffusion of the drugs. Sodium diclofenac and paclitaxel were chosen as model drugs and were successfully loaded into the films. The effect of varying the number of layers in the (CHI/HA) films as well as the cross-linker concentration on diclofenac loading were studied. Diclofenac was released from the film in about 10 h. Paclitaxel was also found to diffuse within CL films. Its activity was maintained after loading in the CL films, and cellular viability could be reduced by about 55% over 3 days. Such a simple approach may be applied to other types of cross-linked films and to other drugs. These results prove that it is possible to design multifunctional multilayer films that combine mechanical resistance, biodegradability, and bioactivity properties into a single PEM architecture.

Adsorption↗

PubMed2006

Relationship between the growth regime of polyelectrolyte multilayers and the polyanion/polycation complexation enthalpy.

The alternate deposition of polyanions and polycations leads to the formation of films called polyelectrolyte multilayer films (PEMs). Two types of growth processes are reported in the literature, leading to films that grow either linearly or exponentially with the number of deposition steps. In this article we try to establish a correlation between the nature of the growth process and the heat of complexation between the polyanions and the polycations constituting the PEM film. Isothermal titration microcalorimetry experiments performed on several polyanion/polycation systems seem to indicate that an endothermic complexation process is characteristic of an exponential film growth, whereas a strongly exothermic process corresponds to a linear growth regime. Finally, weakly exothermic processes seem to be associated with weakly exponentially growing films. These results thus show that exponentially growing processes are mainly driven by entropy. This explains why the exponential growth processes are more sensitive to temperature than the linear growing processes. This temperature sensitivity is shown on the poly-L-glutamic acid/poly(allylamine) system which grows either linearly or exponentially depending on the ionic strength of the polyelectrolyte solutions.

Adsorption↗

PubMed2006

Complexation of phosphocholine liposomes with polylysine. Stabilization by surface coverage versus aggregation.

Complexation between linear poly-L-lysine (PLL) and negatively charged phosphocholine unilamellar liposomes has been investigated by means of dynamic light scattering, microelectrophoresis, and differential scanning calorimetry. It is found that complexation results in charge inversion (vesicle coating/stabilization) or vesicle aggregation depending on various experimental conditions. Complexation in dependence on PLL concentration and molecular mass, lipid phase state, rate and order of liposome and PLL mixing and time evolution of complexes are investigated and discussed. Aggregation profiles are determined and size distribution of the aggregates formed is studied, leading to the possibility of aggregation control. The time evolution of vesicle aggregation shows particle enlargement consisting in particle growth up to the irreversible formation of thermodynamically stable aggregates of about 2 microm in diameter. The formation of stable aggregates is in agreement with theoretical predictions of colloid particles aggregation by an interplay of long range electrostatic repulsion and short range attraction. Differential scanning calorimetry reveals that physical adsorption occurs exclusively on the vesicle surface and the lipidic organization is not significantly disturbed. The present study describes multivariable aspects of the complexation process between liposomes and polyions which results in the formation of a new class of still poorly defined colloids. These results allow establishing and optimization of a procedure for fabrication of polycation-stabilized vesicles to be used for various applications such as drug delivery.

Calorimetry, Differential Scanning↗

PubMed2006

Partial poly(glutamic acid) <--> poly(aspartic acid) exchange in layer-by-layer polyelectrolyte films. Structural alterations in the three-component architectures.

Layer-by-layer (LBL) polyelectrolyte films were constructed from poly(L-glutamic acid) (PGA) and poly(L-aspartic acid) (PAA) as polyanions, and from poly(L-lysine) (PLL) as the polycation. The terminating layer of the films was always PLL. According to attenuated total reflection Fourier transform infrared measurements, the PGA/PLL and PAA/PLL films, despite their chemical similarity, had largely different secondary structures. Extended beta-sheets dominated the PGA/PLL films, while alpha-helices and intramolecular beta-sheets dominated the PAA/PLL films. The secondary structure of the polyelectrolyte film affected the adsorption of human serum albumin (HSA) as well. HSA preserved its native secondary structure on the PGA/PLL film, but it became largely deformed on PAA/PLL films. Both PGA and PAA were able to extrude to a certain extent the other polyanion from the films, but the structural consequences were different. Adding PAA to a (PGA/PLL)5-PGA film resulted in a simple exchange and incorporation: PGA/PLL and PAA/PLL complexes coexisted with their unaltered secondary structures in the mixed film. The incorporation of PGA into a (PAA/PLL)5-PAA film was up to 50% and caused additional beta-structure increase in the secondary structure of the film. The proportions of the two polyanions were roughly the same on the surfaces and in the interiors of the films, indicating practically free diffusion for both polyanions. The abundance of PAA/PLL and PGA/PLL domains on the film surfaces was monitored by the analysis of the amide I region of the infrared spectrum of a reporter molecule, HSA, adsorbed onto the three-component polyelectrolyte films.

Adsorption↗

PubMed2006

Bioactive coatings based on polyelectrolyte multilayer architectures functionalized by embedded proteins, peptides or drugs.

In recent years, considerable effort has been devoted to the design and controlled fabrication of structured materials with functional properties. The layer by layer buildup of polyelectrolyte multilayer films (PEM films) from oppositely charged polyelectrolytes offers new opportunities for the preparation of functionalized biomaterial coatings. This technique allows the preparation of supramolecular nano-architectures exhibiting specific properties in terms of control of cell activation and may also play a role in the development of local drug delivery systems. Peptides, proteins, chemically bound to polyelectrolytes, adsorbed or embedded in PEM films, have been shown to retain their biological activities.

Coated Materials, Biocompatible↗

PubMed2006

From exponential to linear growth in polyelectrolyte multilayers.

There exist two types of polyelectrolyte multilayers: those whose thickness increases linearly with the number of deposition steps, which are nicely structured, and those whose thickness increases exponentially, which resembles hydrogels. This simple picture has recently slightly evolved with the finding that some exponentially growing films enter into a linear growth phase after a certain number of deposition steps. In this study, we investigate the buildup process of hyaluronic acid/poly(L-lysine) (HA/PLL) multilayers that constitute one of the best known exponentially growing systems. The films are built by using two deposition methods: the well-known dipping method and the more recent spraying method where the polyelectrolyte solutions are sprayed alternately onto a vertical substrate. The goal of this study is twofold. First, we investigate the influence of the main parameters (i.e., spraying rate and spraying time) of the spraying method on the film growth process. We find that, as for the dipping method, the film thickness first evolves exponentially with the number of deposition steps, and after a given number of deposition steps, it follows a linear evolution. We find that similar behavior is observed with the dipping method. Second, because the spraying method allows the very fine variation of the different parameters of the buildup, we use this method to investigate the exponential-to-linear transition. We find that this transition always takes place after about 12 deposition steps whatever the values of the parameters controlling the deposition process. We discuss our results in light of a model proposed by Hübsch et al. (Hübsch, E.; Ball, V.; Senger, B.; Decher, G.; Voegel, J. C.; Schaaf, P. Langmuir 2004, 20, 1980-1985) and later by Salomäki et al. (Salomäki, M.; Vinokurov, I. A.; Kankare, J. Langmuir 2005, 21, 11232-11240) in which it is assumed that the exponential-to-linear transition is due to a film restructuring that progressively forbids the diffusion of one of the polyelectrolytes constituting the film over part of the film. This "forbidden" zone then grows with the number of deposition steps so that the outer zone of the film that is still concerned with diffusion keeps a constant thickness and moves upward as the total film thickness increases.

Journal Article↗

PubMed2006

Control of drug accessibility on functional polyelectrolyte multilayer films.

A surface coating based on polylysine/hyaluronic acid multilayers was designed and acted as a reservoir for an antiproliferative agent, paclitaxel (Taxol). Absolutely no chemical modification of polyelectrolytes or of the drug was needed and the final architecture was obtained in an extremely simple way using the layer-by-layer method. The paclitaxel dose available for human colonic adenocarcinoma cells HT29 seeded on the films could be finely tuned. Moreover, the accessibility of the drugs was controlled by adding on the top of the drug reservoir a capping made of synthetic polyelectrolyte multilayers. This capping was also required to allow adhesion of HT29 cells. Paclitaxel activity was maintained after embedding in the polyelectrolyte multilayers and cellular viability could be reduced by about 80% 96 h after seeding. The strategy described in this paper could be valuable for various other drug/cell systems.

Antineoplastic Agents, Phytogenic↗

PubMed2006

Layer-by-layer self-assembled polyelectrolyte multilayers with embedded liposomes: immobilized submicronic reactors for mineralization.

The development of chemical reactions in nanospaces is of paramount importance for the development of active nanodevices, particularly in nanofluidics. It has been shown in a previous paper that phospholipid vesicles can be incorporated without spontaneous bilayer rupture into poly-L-glutamic acid/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films. The aim of the present study was to use such a system as an "embedded submicronic reactor" able to trigger precipitation of calcium phosphates within closed spaces through an enzymatic reaction, the enzyme also being encapsulated in the vesicle interior. To this aim, large unilamellar vesicles (LUVs) were produced containing calcium ions as active ions in the mineralization process, spermine as an activator of crystal growth, and alkaline phosphatase as a catalyst to convert phosphate esters into phosphates. After stabilization by adding a layer of poly-(D-lysine), these vesicles were embedded in a (PGA-PAH)n film. A paranitrophenyl phosphate containing solution was then put in contact with this film. It is shown by means of infrared spectroscopy in the attenuated total reflection mode that, consecutively to this contact, calcium phosphates are growing inside the embedded vesicles. By using scanning near-field fluorescence microscopy, it is demonstrated that the alkaline phosphatase enzymes are most probably located inside the vesicles after their embedding. In addition, atomic force microscopy was used to show, after chemical removal of the organic top layer of the film, that the inorganic platelets produced after the precipitation reaction are localized in volumes of similar size and shape as that of the vesicles into which the phosphate ester hydrolysis and subsequent precipitation reaction did occur.

Journal Article↗

PubMed2006

Polyelectrolyte multilayers with a tunable Young's modulus: influence of film stiffness on cell adhesion.

Mechanical properties of model and natural gels have recently been demonstrated to play an important role in various cellular processes such as adhesion, proliferation, and differentiation, besides events triggered by chemical ligands. Understanding the biomaterial/cell interface is particularly important in many tissue engineering applications and in implant surgery. One of the final goals would be to control cellular processes precisely at the biomaterial surface and to guide tissue regeneration. In this work, we investigate the substrate mechanical effect on cell adhesion for thin polyelectrolyte multilayer (PEM) films, which can be easily deposited on any type of material. The films were cross linked by means of a water-soluble carbodiimide (EDC), and the film elastic modulus was determined using the AFM nanoindentation technique with a colloidal probe. The Young's modulus could be varied over 2 orders of magnitude (from 3 to 400 kPa) for wet poly(L-lysine)/hyaluronan (PLL/HA) films by changing the EDC concentration. The chemical changes upon cross linking were characterized by means of Fourier transform infrared spectroscopy (FTIR). We demonstrated that the adhesion and spreading of human chondrosarcoma cells directly depend on the Young's modulus. These data indicate that, besides the chemical properties of the polyelectrolytes, the substrate mechanics of PEM films is an important parameter influencing cell adhesion and that PEM offer a new way to prepare thin films of tunable mechanical properties with large potential biomedical applications including drug release.

Carbodiimides↗

PubMed2006

Effect of crosslinking on the elasticity of polyelectrolyte multilayer films measured by colloidal probe AFM.

A homemade colloidal probe atomic force microscope was used to perform nanoindentation with a spherical probe of 5 microm in diameter, at different approach velocities in order to extract the Young's modulus, E0, of poly(L-lysine)/hyaluronan (PLL/HA) films. This parameter is of prime importance to control cellular adhesion. The films were either kept in their native form or cross-linked with a mixture of 1-ethyl-3-(3-dimethyl aminopropyl)carbodiimide (EDC) and N-hydrosulfosuccinimide (sulfo-NHS), where the EDC concentration was varied from 1 up to 100 mg mL(-1) (approximately from 5 to 500 mM). A model based on Hertz mechanics was used to account for the interactions between film and probe. It is shown that the Young's modulus varies with the approach velocity for the native (PLL/HA) films, whereas for cross-linked ones, E0 is independent from the velocity over the whole range investigated. It is found that for native films, E0 takes a value of 3 kPa at low approach velocities, a velocity domain that should be relevant in cellular adhesion processes. The Young's modulus increases with the EDC concentration used to cross-link the films and levels off at a value of about 400 kPa for EDC concentrations exceeding 40 mg mL(-1). Thus, it is possible by crosslinking PLL/HA films to control their elastic properties with the aim to alter their behavior as to the cellular adhesion.

Cell Adhesion↗

PubMed2006

Polyelectrolyte multilayer films as substrates for photoreceptor cells.

Reconstruction of extracellular matrix substrates for delivery of functional photoreceptors is crucial in pathologies such as retinal degeneration and age-related macular degeneration. In this study, we assembled polyelectrolyte films using the layer-by-layer deposition method. The buildup of three different films composed of poly(L-lysine)/chondroitin sulfate (PLL/CSA), poly(L-lysine)/poly(styrenesulfonate) (PLL/PSS), or poly(L-lysine)/hyaluronic acid (PLL/HA) was followed by means of quartz crystal microbalance measurements, optical waveguide light mode spectroscopy, confocal microscopy, and atomic force microscopy. The exponential growth regime and the diffusion of PLL chains from the bulk through the PLL/CSA, PLL/PSS, and PLL/HA films was examined. Evaluation of photoreceptor cell viability was optimal on one layer of PLL (PLL(1)), followed by 10 bilayers of PLL/HA [(PLL/HA)(10)] and 10 bilayers of PLL/CSA [(PLL/CSA)(10)]. The number of bilayers and the type of terminating layer also had a significant influence on the number of photoreceptor cells attached. Functionalized polyelectrolyte multilayer films were obtained by adsorbing basic fibroblastic factor (bFGF) or the insoluble fraction of interphotoreceptor matrix (IPM) on or within polyelectrolyte multilayers. bFGF and IPM adsorption on top of the (PLL/CSA)(10)/PLL polyelectrolyte films increased the number of photoreceptor cells attached and maintained the differentiation of rod and cone cells.

Animals↗

PubMed2006

Glycated polyelectrolyte multilayer films: differential adhesion of primary versus tumor cells.

Glycated polymers have already been widely employed for cell transfection studies, as cells possess specific lectins. However, up to now, these glycated polymers have barely been investigated for their cell adhesive properties, save macrophages. In this work, we use polyelectrolyte multilayer films made of poly(L-lysine) and poly(L-glutamic) acid as polymeric substrates to investigate the role of sugar molecules (e.g., mannose and lactose) on the adhesion of primary cells as compared to that of a tumor cell line. The glycated polymeric films were compared to ungrafted and chemically cross-linked films, which are known to present opposite adhesive properties. A differential adhesion could be evidenced on mannose grafted films: primary chondrocytes adhere and proliferate well on these films, whereas chondrosarcoma cells do not grow well. Although present, the effect of lactose on cell adhesion was much less important. This adhesion, mediated by glycated polymers, appears to be specific. These results show that it is possible to use glycated polyelectrolytes not only as nonviral vectors but also as cell adhesive substrates.

Adhesiveness↗

PubMed2006

Influence of polyelectrolyte multilayer films on the ICAM-1 expression of endothelial cells.

Recently, the use of polyelectrolyte films has been suggested as a new versatile technique of surface modification aimed at tissue engineering. In the present study, we evaluated the expression of intercellular adhesion molecule (ICAM)-1 of endothelial cells (ECs) seeded on two types of polyelectrolyte multilayer films either terminated by poly(D-lysine) (PDL) or poly(allylamine hydrochloride) (PAH). This work showed that chemical stimulations with tumor necrosis factor (TNF)-alpha induced the ICAM-1 expression of ECs differently depending largely on the film architecture employed. Compared with PAH-ending films, the PDL-ending ones upregulated the ICAM-1 expression of the ECs after a prolonged exposition to TNF-alpha, rendering this film type less favorable in tissue engineering. Cytochalasin D (an F-actin disrupting agent) showed the involvement of the cytoskeleton in the upregulation of ICAM-1 for cells deposited on films terminated by PDL. The PAH-ending films did not perturb the ICAM-1 expression of ECs and might thus enhance the seeding of ECs in vascular engineering.

Cells, Cultured↗

PubMed2006

Imaging cell interactions with native and crosslinked polyelectrolyte multilayers.

The adhesion of primary chondrocytes to polyelectrolyte multilayer films, made of poly(l-lysine) (PLL) and hyaluronan (HA), was investigated for native and crosslinked films, either ending by PLL or HA. Crosslinking the film was achieved by means of a water-soluble carbodiimide in combination with N-hydroxysulfosuccinimide. The adhesion of macrophages and primary chondrocytes was investigated by microscopical techniques (optical, confocal, and atomic), providing useful information on the cell/film interface. Native films were found to be nonadhesive for the primary chondrocytes, but could be degraded by macrophages, as could be visualized by confocal laser scanning microscopy after film labeling. Confocal microscopy images show that these films can be deformed by the chondrocytes and that PLL diffuses at the chondrocyte membrane. In contrast, the cells adhered and proliferated well on the crosslinked films, which were not degraded by the macrophages. These results were confirmed by a MTT test over a 6-d period and by atomic force microscopy observations. We thus prove that chemical crosslinking can dramatically change cell adhesion properties, the cells being more stably anchored on the crosslinked films.

Animals↗

PubMed2005

Polyplex-embedding in polyelectrolyte multilayers for gene delivery.

In this work, incorporation of plasmid DNA, pre-complexed with PEI, into polyelectrolyte multilayers has been studied to further develop platforms for local gene delivery. Polyplex embedding in synthetic and naturally degradable architectures was efficient for transfection of human hepato-cellular carcinoma cells.

Carcinoma, Hepatocellular↗

PubMed2005

Polyelectrolyte multilayers and degradable polymer layers as multicompartment films.

Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.

Journal Article↗

PubMed2005

Biologically active lipid A antagonist embedded in a multilayered polyelectrolyte architecture.

Recently [Jessel N, Schwinte P, Donohue R, Lavalle P, Boulmedais F, Darcy R, et al. Pyridylamino-beta-cyclodextrin as a molecular chaperone for lipopolysaccharide embedded in a multilayered polyelectrolyte architecture. Adv Funct Mater 2004;14:963-9], we demonstrated the biological activity of a lipopolysaccharide from Escherichia coli incorporated into layer-by-layer films made of poly (l-lysine) and poly (l-glutamic acid) and containing a polycationic beta-cyclodextrin (CD) with chaperone properties. Here we develop innovative architectures containing a complex made of a charged beta-cyclodextrin and a lipid A antagonist (LAA) as potential systems for local endotoxin antagonistic activity. We examine the biological activity of these architectures. The CD-LAA complex adsorbed on top, or embedded into the polyelectrolyte films keeps its LPS antagonistic activity on both murine and human macrophages for at least 24h.

Animals↗

PubMed2005

Interactions between multivalent ions and exponentially growing multilayers: dissolution and exchange processes.

The interactions between multivalent ions (small ions or polyelectrolytes) and two exponentially growing polyelectrolyte multilayers, namely, (HA-PLL)(n)() and (HA-PAH)(n)() films, are investigated (HA = hyaluronic acid, PLL = poly-l-lysine, PAH = poly(allylamine)). Ferrocyanide and ferricyanide ions are used as small ion probes. The most striking finding is that, even though these two ions differ only by one charge unit, the ferrocyanide ions induce a partial dissolution of both multilayers whereas these films remain stable in the presence of ferricyanide ions. The dissolution process of (HA-PLL)(n)() films is more rapid than that of (HA-PAH)(n)() films, indicating a stronger interaction between HA and PAH compared to HA and PLL. This is confirmed by polyelectrolyte exchange experiments: when an (HA-PLL)(n)() multilayer film is put into contact with a PAH solution, PLL is quantitatively exchanged with the PAH chains and transformed into an HA-PAH film, whereas an (HA-PAH)(n)() multilayer remains stable in the presence of a PLL solution.

Journal Article↗