PubMed Health⌕ Search

Biomedical subjects

Ronny Neumann

Publications and source records attributed to Ronny Neumann.

At least 19 recordsLinked to original sources
PubMed2006

An example of lipophiloselectivity: the preferred oxidation, in water, of hydrophobic 2-alkanols catalyzed by a cross-linked polyethyleneimine-polyoxometalate catalyst assembly.

A cross-linked polyethyleneimine polymer containing the [ZnWZn2(H2O)2(ZnW9O34)2]12- polyoxometalate was prepared from branched polyethyleneimine (Mw = 600), the polyoxometalate, and a n-octylamine-epichlorohydrin cross-linking reagent. This catalytic assembly was active for the selective oxidation of 2-alkanols to 2-alkanones with aqueous H2O2 with reactions presumably occurring at a hydrophobic domain. Most importantly, the catalyst showed distinctive lipophiloselectivity, that is selectivity as a function of the lipophilic nature of a reaction substrate. The lipophiloselectivity was proportional to the relative partition coefficient (1-octanol/water) of the substrates.

Journal Article↗
PubMed2006

Characterization of manganese(V)-oxo polyoxometalate intermediates and their properties in oxygen-transfer reactions.

A manganese(III)-substituted polyoxometalate, [alpha2-P2MnIII(L)W17O61]7- (P2W17MnIII), was studied as an oxidation catalyst using iodopentafluorobenzene bis(tifluoroacetate) (F5PhI(TFAc)2) as a monooxygen donor. Pink P2W17MnIII turns green upon addition of F5PhI(TFAc)2. The 19F NMR spectrum of F5PhI(TFAc)2 with excess P2W17MnIII at -50 degrees C showed the formation of an intermediate attributed to P2W17MnIII-F5PhI(TFAc)2 that disappeared upon warming. The 31P NMR spectra of P2W17MnIII with excess F5PhI(TFAc)2 at -50 and -20 degrees C showed a pair of narrow peaks attributed to a diamagnetic, singlet manganese(V)-oxo species, P2W17MnV=O. An additional broad peak at -10.6 ppm was attributed to both the P2W17MnIII-F5PhI(TFAc)2 complex and a paramagnetic, triplet manganese(V)-oxo species. The electronic structure and reactivity of P2W17MnV=O were modeled by DFT calculations using the analogous Keggin compound, [PMnV=OW11O39]4-. Calculations with a pure functional, UBLYP, showed singlet and triplet ground states of similar energy. Further calculations using both the UBLYP and UB3LYP functionals for epoxidation and hydroxylation of propene showed lowest lying triplet transition states for both transformations, while singlet and quintet transition states were of higher energy. The calculations especially after corrections for the solvent effect indicate that [PMnV=OW11O39]4- should be highly reactive, even more reactive than analogous MnV=O porphyrin species. Kinetic measurements of the reaction of P2W17MnV=O with 1-octene indicated, however, that P2W17MnV=O was less reactive than a MnV=O porphyrin. The experimental enthalpy of activation confirmed that the energy barrier for epoxidation is low, but the highly negative entropy of activation leads to a high free energy of activation. This result originates in our view from the strong solvation of the highly charged polyoxometalate by the polar solvent used and adventitious water. The higher negative charge of the polyoxometalate in the transition versus ground state leads to electrostriction of the solvent molecules and to a loss of degrees of freedom, resulting in a highly negative entropy of activation and slower reactions.

Journal Article↗
PubMed2006

Palladium nanoparticles stabilized by alkylated polyethyleneimine as aqueous biphasic catalysts for the chemoselective stereocontrolled hydrogenation of alkenes.

Palladium nanoparticles were prepared, stabilized, and dispersed in water by alkylated branched polyethyleneimine. The palladium nanoparticles were effective aqueous biphasic catalysts for the chemoselective hydrogenation of alkenes with preferential reduction of less hindered double bonds, such as reduction of 3-methylcyclohexene in the presence of 1-methylcyclohexene and 1-octene in the presence of 2-methyl-2-heptene. [structure: see text].

Journal Article↗
PubMed2006

Catalysts for monooxygenations made from polyoxometalate: an iron(V)-oxo derivative of the Lindqvist anion.

This work uses density functional calculations to design a new high-valent Fe(V)=O catalyst [Mo5O18Fe=O]3-, which is based on the Lindqvist polyoxometalate (Mo6O19(2-)). Because the parent species is stable to oxidative conditions, one may assume that the newly proposed iron-oxo species will be stable, too. The calculated Mössbauer spectroscopic data may be helpful toward an eventual identification of the species. The calculations of C-H hydroxylation and C=C epoxidation of propene show that, if made, [Mo5O18Fe=O]3- should be a potent oxidant that will be subject to strong solvent effect. Moreover, the Lindqvist catalyst leads to an intriguing result; the reaction that starts along an epoxidation pathway with C=C activation ends with a C-H hydroxylation product ((4)6) due to rearrangement on the catalyst. The origins of this result are analyzed in terms of the structure of the catalyst and the electronic requirements for conversion of an epoxidation intermediate to a hydroxylation product. Thus, if made, the [Mo5O18Fe=O]3 will be a selective C-H hydroxylation reagent.

Journal Article↗
PubMed2006

Titanium phosphonate porous materials constructed from dendritic tetraphosphonates.

An organic-inorganic hybrid material, TPPhA-Ti, was constructed by non-hydrolytic condensation of a dendritic tetrakis-1,3,5,7-(4-phosphonatophenyl)adamantane precursor and titanium(IV) isopropoxide. One preparative pathway yielded insoluble materials with a Ti/P ratio of approximately 1 which was confirmed by a combination of FT-IR, TGA, and EDS measurements. N2 sorption experiments showed that TPPhA-Ti is a porous solid (micropores approximately 13 A; mesopores approximately 38 A) with a high surface area, approximately 550 m2 g(-1). The structure and morphology of the TPPhA-Ti as investigated by transmission and scanning electron microscopy showed a layered-type material. Additional X-ray diffraction data suggest a paracrystalline material; an optimization of possible molecular arrangements of TPPhA-Ti was simulated that was in agreement with the experimental data. A second preparative pathway yielded a Ti oxide-phosphonate with a Ti/P ratio of approximately 3.4. Both TEM and SEM revealed that hollow nanospheres were formed with diameters of approximately 180-300 nm.

Journal Article↗
PubMed2006

Micelle directed synthesis of polyoxometalate nanoparticles and their improved catalytic activity for the aerobic oxidation of sulfides.

Micelle directed polyoxometalate nanoparticles were synthesized by depositing H3+xPVxMo12-xO40 (x = 0, 2) by precipitation on micelles prepared from cesium dodecyl sulfate. The cryo-TEM image showed particles of about approximately 10 nm roughly consistent with the particle size computed from an idealized model. HRTEM coupled with EELS imaging to map the distribution of the elements also supported the formation of micelle directed polyoxometalate nanoparticles. In the aerobic oxidation of various sulfides to sulfoxides and sulfones, the clustered polyoxometalate assemblies supported on hydrophilic silica showed significantly higher catalytic activity versus that of nonclustered assemblies.

Journal Article↗
PubMed2006

Molecular oxygen and oxidation catalysis by phosphovanadomolybdates.

The history of aerobic catalytic oxidation mediated by a subclass of polyoxometalates, the phosphovanadomolybdates of the Keggin structure, [PV(x)Mo(12-x)O40](3+x)-, is described. In the earlier research it was shown that phosphovanadomolybdates catalyze oxydehydrogenation reactions through an electron-transfer oxidation of a substrate by the polyoxometalate that is then reoxidized by oxygen. These aerobic oxidations are selective and synthetically useful in various transformations, notably diene aromatization, phenol dimerization and alcohol oxidation. Oxygen transfer from the polyoxometalate to arenes and alkylarenes was also discussed as a homogeneous analog of a Mars-van Krevelen oxidation. "Second generation" catalysts include binary complexes of the polyoxometalate and a organometallic compound useful, for example, for methane oxidation and nanoparticles stabilized by polyoxometalates effective for aerobic alkene epoxidation.

Journal Article↗
PubMed2005

The high-valent iron-oxo species of polyoxometalate, if it can be made, will be a highly potent catalyst for C-H hydroxylation and double-bond epoxidation.

This study uses density functional theory (DFT) calculations to explore the reactivity of the putative high-valent iron-oxo reagent of the iron-substituted polyoxometalate (POM-FeO4-), derived from the Keggin species, PW12O40(3-). It is shown that POM-FeO4- is in principle capable of C-H hydroxylation and C=C epoxidation and that it should be a powerful oxidant, even more so than the Compound I species of cytochrome P450. The calculations indicate that in a solvent, the barriers, and especially those for epoxidation, become sufficiently small that one may expect an extremely fast reaction. An experimental investigation (by R.N. and A.M.K.) shows, however, that the formation of POM-FeO4- using the oxygen donor, F5PhI-O, leads to a persistent adduct, POM-FeO-I-PhF5(4-), which does not decompose to POM-FeO4- + F5Ph-I at the working temperature and exhibits sluggish reactivity, in accord with previous experimental results (Hill, C. L.; Brown, R. B., Jr. J. Am. Chem. Soc. 1986, 108, 536 and Mansuy, D.; Bartoli, J.-F.; Battioni, P.; Lyon, D. K.; Finke, R. G. J. Am. Chem. Soc. 1991, 113, 7222). Subsequent calculations indeed reveal that the gas-phase binding energy of F5PhI to POM-FeO4- is high (ca. 20 kcal/mol) compared to the corresponding binding energy of propene (ca. 2-3 kcal/mol). As such, the POM-FeO-I-PhF5(4-) complex is expected to be persistent toward the displacement of F5PhI by a substrate like propene, leading thereby to sluggish oxidative reactivity. According to theory, overcoming this technical difficulty may turn out to be very rewarding. The question is, can POM-FeO4- be made?

Journal Article↗
PubMed2005

Regioselective alkene carbon-carbon bond cleavage to aldehydes and chemoselective alcohol oxidation of allylic alcohols with hydrogen peroxide catalyzed by [cis-Ru(II)(dmp)2(H2O)2]2+ (dmp = 2,9-dimethylphenanthroline).

[reaction: see text] [cis-Ru(II)(dmp)2(H2O)2]2+ (dmp = 2,9-dimethylphenanthroline) was found to be a selective oxidation catalyst using hydrogen peroxide as oxidant. Thus, primary alkenes were very efficiently oxidized via direct carbon-carbon bond cleavage to the corresponding aldehydes as an alternative to ozonolysis. Secondary alkenes were much less reactive, leading to regioselective oxidation of substrates such as 4-vinylcyclohexene and 7-methyl-1,6-octadiene at the terminal position. Primary allylic alcohols were chemoselectively oxidized to the corresponding allylic aldehydes, e.g., geraniol to citral.

Journal Article↗
PubMed2005

Selective ortho hydroxylation of nitrobenzene with molecular oxygen catalyzed by the H5PV2Mo10O40 polyoxometalate.

Nitrobenzene was regioselectively oxidized to 2-nitrophenol with oxygen in a reaction catalyzed by the H5PV2Mo10O40 polyoxometalate. The reaction was first order in oxygen and catalyst. 15N NMR showed the interaction between nitrobenzene and the polyoxometalate. Use of labeled 18O2, H218O, a competitive kinetic isotope experiment, and use of phenyl-tert-butylnitrone as a spin-trap and identification by EPR provided evidence for formation of a radical intermediate involving a selective intramolecular interaction at the ortho position due to formation of a H5PV2Mo10O40-nitrobenzene complex.

Journal Article↗
PubMed2005

Phenanthroline-polyoxometalate hybrid compounds and the observation of intramolecular charge transfer.

A phenanthroline ligand has been covalently modified at the 2 and 9 positions by an aminophenylhexamolybdate substituent. The 1H NMR spectrum indicated a strong electron-withdrawing effect of the hexamolybdate (Mo6O19(2-)) moiety on the phenanthroline ligand. UV-vis and cyclic voltammetry showed extended conjugation of the hybrid phenanthroline-polyoxometalate compound and the possibility of easy oxidation of the extended phenanathroline ligand. Further EPR experiments provided strong evidence for an intramolecular charge-transfer process with the formation of a phenanthroline cation radical and a reduced hexamolybdate.

Journal Article↗
PubMed2004

Alkylated polyethyleneimine/polyoxometalate synzymes as catalysts for the oxidation of hydrophobic substrates in water with hydrogen peroxide.

Combinations of alkylated polyethylenimine and polyoxometalates yield water-soluble synzymes with hydrophobic regions that allowed the aqueous biphasic selective oxidation of very hydrophobic, water-insoluble substrates with hydrogen peroxide. With the alkylated PEI/{PO4[WO(O2)2]4}3- highly effective C-C bond cleavage of alkenes to aldheydes was observed. The synzymes have both tertiary and quaternary amine centers as shown by a combination of 15N-1H HMBC and XPS measurements. The existence of hydrophobic regions was concluded from the measurement of contact angles and a hypsochromic shift of a fluorescent probe.

Journal Article↗
PubMed2004

Mild, aqueous, aerobic, catalytic oxidation of methane to methanol and acetaldehyde catalyzed by a supported bipyrimidinylplatinum-polyoxometalate hybrid compound.

We have demonstrated that a bipyrimidinylplatinum-polyoxometalate, [Pt(Mebipym)Cl2]+[H4PV2Mo10O40]-, supported on silica is an active catalyst for the aerobic oxidation of methane to methanol in water under mild reaction conditions. Further oxidation of methanol yields acetaldehyde. The presence of the polyoxometalate is presumed to allow the facile oxidation of a Pt(II) intermediate to a Pt(IV) intermediate and to aid in the addition of methane to the Pt catalytic center.

Journal Article↗
PubMed2004

Oxidation of alkylarenes by nitrate catalyzed by polyoxophosphomolybdates: synthetic applications and mechanistic insights.

Alkylarenes were catalytically and selectively oxidized to the corresponding benzylic acetates and carbonyl products by nitrate salts in acetic acid in the presence of Keggin type molybdenum-based heteropolyacids, H(3+)(x)()PV(x)()Mo(12)(-)(x)()O(40) (x = 0-2). H(5)PV(2)Mo(10)O(40) was especially effective. For methylarenes there was no over-oxidation to the carboxylic acid contrary to what was observed for nitric acid as oxidant. The conversion to the aldehyde/ketone could be increased by the addition of water to the reaction mixture. As evidenced by IR and (15)N NMR spectroscopy, initially the nitrate salt reacted with H(5)PV(2)Mo(10)O(40) to yield a N(V)O(2)(+)[H(4)PV(2)Mo(10)O(40)] intermediate. In an electron-transfer reaction, the proposed N(V)O(2)(+)[H(4)PV(2)Mo(10)O(40)] complex reacts with the alkylarene substrate to yield a radical-cation-based donor-acceptor intermediate, N(IV)O(2)[H(4)PV(2)Mo(10)O(40)]-ArCH(2)R(+)(*). Concurrent proton transfer yields an alkylarene radical, ArCHR(*), and NO(2). Alternatively, it is possible that the N(V)O(2)(+)[H(4)PV(2)Mo(10)O(40)] complex abstracts a hydrogen atom from alkylarene substrate to directly yield ArCHR(*) and NO(2). The electron transfer-proton transfer and hydrogen abstraction scenarios are supported by the correlation of the reaction rate with the ionization potential and the bond dissociation energy at the benzylic positions of the alkylarene, respectively, the high kinetic isotope effect determined for substrates deuterated at the benzylic position, and the reaction order in the catalyst. Product selectivity in the oxidation of phenylcyclopropane tends to support the electron transfer-proton transfer pathway. The ArCHR(*) and NO(2) radical species undergo heterocoupling to yield a benzylic nitrite, which undergoes hydrolysis or acetolysis and subsequent reactions to yield benzylic acetates and corresponding aldehydes or ketones as final products.

Acetates↗