Synthesis of dendritic polyoxometalate complexes assembled by ionic bonding and their function as recoverable and reusable oxidation catalysts.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to Ronny Neumann.
Explore the source record for details and available documents.
Inorganic-organic hybrid mesoporous materials were prepared by cocrystallization of a "sandwich" type polyoxometalate, [ZnWZn2(H2O)2(ZnW9O34)2]12-, and branched tripodal organic polyammonium salts, tris[2-(trimethylammonium)ethyl]-1,3,5-benzenetricarboxylate or 1,3,5-tris[4-(N,N,N-trimethylammoniumethylcarboxyl)phenyl]benzene trications. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed formation of three-dimensional perforated coral-shaped amorphous materials with the organic cations surrounding polyoxometalate anions. N2 sorption analysis showed that the hybrid materials have a BET surface area of approximately 30-50 m2 g(-1) and an average pore diameter of 36 A leading to the classification of these materials as mesoporous materials with moderate surface areas. These hybrid materials behaved as very effective and selective heterogeneous catalysts for the epoxidation of allylic alcohols and oxidation of secondary alcohols to ketones with hydrogen peroxide as oxidant. The activity and selectivity of the heterogeneous catalysts based on the hybrid materials was similar to those of homogeneous catalysts based on the same [ZnWZn1(H2O)2(ZnW9O34)2]12- polyoxometalate.
Iodination of arenes was carried out by reacting 1 equiv of arene substrate with 0.5 equiv of iodine under an oxygen atmosphere with H5PV2Mo10O40 as oxidation catalyst. The synthesis is an inherently waste-free method for the preparation of iodoarenes.
A metal-organic-polyoxometalate hybrid compound with two functional centers consisting of a rhodium(I)bis(diphenylphospine) unit connected through two alkylene bridging groups to a lacunary Keggin type polyoxometalate was synthesized and used as an effective, recyclable hydrogenation catalyst in monophasic and aqueous biphasic reaction modes.
The epoxidation of allylic alcohols is shown to be efficiently and selectively catalyzed by the oxidatively resistant sandwich-type polyoxometalates, POMs, namely [WZnM(2)(ZnW(9)O(34))(2)](q)(-) [M = OV(IV), Mn(II), Ru(III), Fe(III), Pd(II), Pt(II), Zn(II); q = 10-12], with organic hydroperoxides as oxygen source. Conspicuous is the fact that the nature of the transition metal M in the central ring of polyoxometalate affects significantly the reactivity, chemoselectivity, regioselectivity, and stereoselectivity of the allylic alcohol epoxidation. For the first time, it is demonstrated that the oxovanadium(IV)-substituted POM, namely [ZnW(VO)(2)(ZnW(9)O(34))(2)](12-), is a highly chemoselective, regioselective, and also stereoselective catalyst for the clean epoxidation of allylic alcohols. A high enantioselectivity (er values up to 95:5) has been achieved with [ZnW(VO)(2)(ZnW(9)O(34))(2)](12)(-) and the sterically demanding TADOOL-derived hydroperoxide TADOOH as regenerative chiral oxygen source. Thus, a POM-catalyzed asymmetric epoxidation of excellent catalytic efficiency (up to 42 000 TON) has been made available for the development of sustainable oxidation processes. The high reactivity and selectivity of this unprecedented oxygen-transfer process are mechanistically rationalized in terms of a peroxy-type vanadium(V) template.
We have demonstrated that a polyfluorinated alcohol, 2,2,2-trifluoroethanol, solvent enables haloperoxidase type activity and the oxychlorination of arenes (benzene and its alkylated derivatives) without a metal catalyst. The polyfluorinated alcohol has a dual function; it catalyzes electrophilic chlorination of less reactive arenes by several orders of magnitude and oxidation of chloride at lower H+ concentrations. DFT calculations show that a complementary charge template in the transition state explains the catalysis of the electrophilic chlorination.
[reaction: see text] Polyfluorinated quaternary ammonium cations, [CF(3)(CF(2))(7)(CH(2))(3)](3)CH(3)N(+) (R(F)N(+)), were synthesized and used as countercations for the [WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)](12)(-) (M = Mn(II), Zn(II)) polyoxometalate. The (R(F)N(+))(12)[WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)] compounds were fluorous biphasic catalysts for alcohol and alkenol oxidation, and alkene epoxidation with aqueous hydrogen peroxide. Reaction protocols with or without a fluorous solvent were tested. The catalytic activity and selectivity was affected by both the hydrophobicity of the solvent and the substrate.
Hybrid compounds with two functional centers consisting of a metallosalen moiety (M[bond]salen; M = Mn, Co, Ni, and Pd) connected by an alkylene bridging group to a lacunary Keggin type polyoxometalate were synthesized and characterized. In these metallosalen-polyoxometalate compounds (M[bond]salen[bond]POM) it was shown by the use of a combination of UV[bond]vis, (1)H NMR, EPR, XPS, and cyclic voltammetry measurements that the polyoxometalate exerts a significant intramolecular electronic effect on the metallosalen moiety leading to formation of an oxidized metallosalen moiety. For the Mn[bond]salen[bond]POM, the metallosalen center is best described as a metal[bond]salen cation radical species; that is, a localized "hole" is formed on the salen ligand. For the other M[bond]salen[bond]POM compounds, the metallosalen moiety can be described as a hybrid of a metal[bond]salen cation radical species and an oxidized metal[bond]salen species, that is, a delocalized "hole" is formed at the metallosalen center. It is proposed that these oxidized metallosalen centers are best characterized as stabilized charge transfer (metallosalen donor[bond]polyoxometalate acceptor) complexes despite the relatively large distance between the two functional centers.
A new heptamolybdate polyoxometalate structure containing ruthenium(II) or osmium(II) metal centers, [M(II)(DMSO)(3)Mo(7)O(24)](4-) (M = Ru, Os), was synthesized by reaction between (NH(4))(6)Mo(7)O(24) and cis-M(DMSO)(4)Cl(2). X-ray structure analysis revealed the complexes to contain a ruthenium/osmium center in a trigonal antiprismatic coordination mode bound to three DMSO moieties via the sulfur atom of DMSO and three oxygen atoms of the new heptamolybdate species. The heptamolybdate consists of seven condensed edge-sharing MoO(6) octahedra with C(2v) symmetry. Three Mo atoms are in classic type II octahedra with a cis dioxo configuration. Two Mo atoms are also type-II-like, but one of the short Mo-O bonds is associated with bridging oxygen atoms rather than terminal oxygen atoms. Two molybdenum atoms are unique in that they are in a trigonally distorted octahedral configuration with three short Mo-O bonds and two intermediate-long M-O bonds and one long Mo-O bond. The [M(II)(DMSO)(3)Mo(7)O(24)](4-) polyoxometalates were effective and in some cases highly selective catalysts for the aerobic oxidation of alcohols to ketones/aldehydes. The integrity of the polyoxometalate was apparently retained at high turnover numbers and throughout the reaction, and a variation of an oxometal type mechanism was proposed to explain the results.
We have demonstrated that a simply prepared water-soluble polyoxometalate, Na12[WZnZn2(H2O)2(ZnW9O34)2], synthesized from readily available zinc and tungsten salts in the presence of nitric acid, is an effective catalyst for selective alcohol oxidation with hydrogen peroxide in biphasic (water-alcohol) reaction media. Experiments have shown that the "self-assembled" catalyst in its mother liquor was as active as the isolated catalyst. The aqueous catalyst solution is easily separated from the water-insoluble products and can be recycled without loss in activity or selectivity.
Experimental observations show that direct olefin epoxidation by H(2)O(2), which is extremely sluggish otherwise, occurs in fluorinated alcohol (R(f)OH) solutions under mild conditions requiring no additional catalysts. Theoretical calculations of ethene and propene epoxidation by H(2)O(2) in the gas phase and in the presence of methanol and of two fluorinated alcohols, presented in this paper, show that the fluoro alcohol itself acts as a catalyst for the reaction by providing a template that stabilizes specifically the transition state (TS) of the reaction. Thus, much like an enzyme, the fluoro alcohol provides a complementary charge template that leads to the reduction of the barrier by 5-8 kcal mol(-)(1). Additionally, the fluoro alcohol template keeps the departing OH and hydroxyalkenyl moieties in close proximity and, by polarizing them, facilitates the hydrogen migration from the latter to form water and the epoxide product. The reduced activation energy and structural confinement of the TS over the fluoro alcohol template render the epoxidation reaction observable under mild synthetic conditions.
Sandwich-type polyoxometalates (POMs), namely [WZnM2(ZnW9O34)2]q- [M = Mn(II), Ru(III), Fe(III), Pd(II), Pt(II), Zn(II); q = 10-12], are shown to catalyze selectively the epoxidation of chiral allylic alcohols with 30% hydrogen peroxide under mild conditions (ca. 20 degrees C) in an aqueous/organic biphasic system. The transition metals M in the central ring of polyoxometalate do not affect the reactivity, chemoselectivity, or stereoselectivity of the allylic alcohol epoxidation by hydrogen peroxide. Similar selectivities, albeit in significantly lower product yields, are observed for the lacunary Keggin POM [PW11O39]7-, in which a peroxotungstate complex has been shown to be the active oxidizing species. All these features support a tungsten peroxo complex rather than a high-valent transition-metal oxo species operates as the key intermediate in the sandwich-type POM-catalyzed epoxidations. On capping of the hydroxy functionality through acetylation or methylation, no reactivity of these hydroxy-protected substrates [1a(Ac) and 1a(Me)] is observed by these POMs. A template is proposed to account for the marked enhancement of reactivity and selectivity, in which the allylic alcohol is ligated through metal-alcoholate bonding, and the H2O2 oxygen source is activated in the form of a peroxotungsten complex. 1,3-Allylic strain promotes a high preference for the threo diastereomer and 1,2-allylic strain a high preference for the erythro diastereomer, whereas tungsten-alcoholate bonding furnishes high regioselectivity for the epoxidation of the allylic double bond. The estimated dihedral angle alpha of 50-70degrees for the metal-alcoholate-bonded template of the POM/H2O2 system provides the best compromise between 1,2A and 1,3A strain during the oxygen transfer. In contrast to acyclic allylic alcohols 1, the M-POM-catalyzed oxidation of the cyclic allylic alcohols 4 by H2O2 gives significant amounts of enone.
The oxovanadium(IV) sandwich-type POM catalyzes the chemo-, regio-, and stereoselective epoxidation of allylic alcohols by chiral hydroperoxides with very high catalytic efficiency (up to 42 000 TON), a potentially valuable oxidation for the development of sustainable processes. By using the sterically demanding, TADDOL-derived hydroperoxide TADOOH as the chiral oxygen source, enantiomeric ratios (er) of up to 95:5 have been achieved.
Benzylic, allylic, and aliphatic alcohols are oxidized to aldehydes and ketones in a reaction catalyzed by Keggin-type polyoxomolybdates, PV(x)Mo(12-x)O(40)(-(3+x)) (x = 0, 2), with DMSO as a solvent. The oxidation of benzylic alcohols is quantitative within hours and selective, whereas that of allylic alcohols is less selective. Oxidation of aliphatic alcohols is slower but selective. Further mechanistic studies revealed that, for H(3)PMo(12)O(40) as a catalyst and benzylic alcohols as substrates, the sulfoxide is in fact an oxygen donor in the reaction. Postulated reaction steps as determined from isotope-labeling experiments, kinetic isotope effects, and Hammett plots include (a) sulfoxide activation by complexation to the polyoxometalate and (b) oxygen transfer from the activated sulfoxide and elimination of water from the alcohol. The mechanism is supported by the reaction kinetics.
Palladium 15-20 nm particles stabilized by a Keggin-type polyoxometalate were prepared by reduction of K(5)PPdW(11)O(39) with H(2). The nanoparticles were shown to be effective catalysts for Suzuki-, Heck-, and Stille-type carbon-carbon coupling and carbon-nitrogen coupling reactions of bromoarenes in aqueous media. Chloroarenes were also reactive in reaction media without solvent. [reaction: see text]
A manganese(III)-substituted polyoxometalate of the "sandwich" structure, [MnIII2ZnW(ZnW9O34)2]10-, catalyzed the highly selective (>99.9%) epoxidation of alkenes, such as 1-octene, 2-octene, and cyclohexene with nitrous oxide. Reactions occurred in homogeneous media at 150 degrees C under 1 atm N2O. The epoxidation had a linear reaction profile; turnover frequencies of 0.5-1.4 h-1 were measured. The reactions were also stereoselective; for example, cis-stilbene gave cis-stilbene oxide. From ESR spectroscopy, it was shown that a Mn(II) octahedral species is reversibly formed by reaction between the original Mn(III) polyoxometalate and N2O. Therefore, it would appear that a Mn(V)-oxo active species is not formed; it is possible that the activation of nitrous oxide was by its oxidation by the Mn(III) polyoxometalate.
The polyoxomolydate of the Keggin structure, PMo12O403-, catalyzes, under anaerobic conditions, oxygen transfer from sulfoxides to alkylarenes such as xanthene and diphenylmethane to yield xanthen-9-one and benzophenone, respectively. With use of 17O and 18O labeled phenylmethylsulfoxide it was shown that the sulfoxide is complexed by the polyoxometalate and the oxygen is transferred from the sulfoxide to the alkylarene. There is a good correlation between the reaction rate and the heterolytic benzylic C-H bond energy indicating a hydride transfer reaction from the alkylarene to the polyoxometalate-sulfoxide complex. In the case of triphenylmethane the resulting carbocation reacts to yield 9-phenylfluorene as the major product. The reaction kinetics supports such a reaction pathway.
The H5PV2Mo10O40 polyoxometalate in a polyethylene glycol solvent was effective for a series of aerobic oxidation reactions including oxydehydrogenation of alcohols and cyclic dienes, oxidation of sulfides and the Wacker reaction; the solvent-catalyst phase can be recovered and recycled.