Biomedical subjects

Senyon Choe

Publications and source records attributed to Senyon Choe.

27 records · Page 2Linked to original sources

PubMed2003

The BMP7/ActRII extracellular domain complex provides new insights into the cooperative nature of receptor assembly.

Activins and bone morphogenetic proteins (BMPs) elicit diverse biological responses by signaling through two pairs of structurally related type I and type II receptors. Here we report the crystal structure of BMP7 in complex with the extracellular domain (ECD) of the activin type II receptor. Our structure produces a compelling four-receptor model, revealing that the types I and II receptor ECDs make no direct contacts. Nevertheless, we find that truncated receptors lacking their cytoplasmic domain retain the ability to cooperatively assemble in the cell membrane. Also, the affinity of BMP7 for its low-affinity type I receptor ECD increases 5-fold in the presence of its type II receptor ECD. Taken together, our results provide a view of the ligand-mediated cooperative assembly of BMP and activin receptors that does not rely on receptor-receptor contacts.

Activin Receptors, Type II↗

PubMed2003

Structural basis of BMP signaling inhibition by Noggin, a novel twelve-membered cystine knot protein.

BACKGROUND: The activity of bone morphogenetic proteins (BMPs) is regulated extracellularly by several families of secreted, negatively-acting factors. These BMP antagonists participate in the control of a diverse range of embryonic processes, such as establishment of the dorsal-ventral axis, neural induction, and formation of joints in the developing skeletal system. The ongoing process of neurogenesis in the adult brain also requires inhibition of BMP ligand activity. To date, the three-dimensional structures of these antagonists as well as the nature of their interaction with ligand have remained unknown. Toward that end, we have determined the crystal structure of the antagonist Noggin bound to BMP-7. METHODS: The complex of the two homodimeric proteins was preformed, isolated by size exclusion chromatography, and crystallized at neutral pH. To probe the molecular interface of the complex and to quantitate the activity of a human mutant form, variant Noggin proteins were produced and their binding affinities were measured in vitro. The correlation between binding affinity and biological activity was examined with Noggin-soaked beads implanted in the developing chick limb bud. RESULTS AND CONCLUSIONS: The structure of the complex reveals that Noggin inhibits BMP signaling by blocking the binding sites of both types of receptors (Type I and Type II), mimicking their modes of binding. The affinity of Noggin variants for BMP-7 correlated well with the inhibition of BMP-induced chondrogenesis in the chick limb bud, confirming that Noggin acts by sequestering the ligand in an inactive state. Interestingly, the scaffold of Noggin was found to contain a cystine knot topology and protein fold similar to that of BMPs, indicating that ligand and antagonist may have evolved from a common ancestral gene.

Animals↗

PubMed2002

Structural basis of BMP signalling inhibition by the cystine knot protein Noggin.

The interplay between bone morphogenetic proteins (BMPs) and their antagonists governs developmental and cellular processes as diverse as establishment of the embryonic dorsal-ventral axis, induction of neural tissue, formation of joints in the skeletal system and neurogenesis in the adult brain. So far, the three-dimensional structures of BMP antagonists and the structural basis for inactivation have remained unknown. Here we report the crystal structure of the antagonist Noggin bound to BMP-7, which shows that Noggin inhibits BMP signalling by blocking the molecular interfaces of the binding epitopes for both type I and type II receptors. The BMP-7-binding affinity of site-specific variants of Noggin is correlated with alterations in bone formation and apoptosis in chick limb development, showing that Noggin functions by sequestering its ligand in an inactive complex. The scaffold of Noggin contains a cystine (the oxidized form of cysteine) knot topology similar to that of BMPs; thus, ligand and antagonist seem to have evolved from a common ancestral gene.

Amino Acid Sequence↗

PubMed2002

The calcium activation of gelsolin: insights from the 3A structure of the G4-G6/actin complex.

Gelsolin participates in the reorganization of the actin cytoskeleton that is required during such phenomena as cell movement, cytokinesis, and apoptosis. It consists of six structurally similar domains, G1-G6, which are arranged at resting intracellular levels of calcium ion so as to obscure the three actin-binding surfaces. Elevation of Ca(2+) concentrations releases latches within the constrained structure and produces large shifts in the relative positioning of the domains, permitting gelsolin to bind to and sever actin filaments. How Ca(2+) is able to activate gelsolin has been a major question concerning the function of this protein. We present the improved structure of the C-terminal half of gelsolin bound to monomeric actin at 3.0 A resolution. Two classes of Ca(2+)-binding site are evident on gelsolin: type 1 sites share coordination of Ca(2+) with actin, while type 2 sites are wholly contained within gelsolin. This structure of the complex reveals the locations of two novel metal ion-binding sites in domains G5 and G6, respectively. We identify both as type 2 sites. The absolute conservation of the type 2 calcium-ligating residues across the six domains of gelsolin suggests that this site exists in each of the domains. In total, gelsolin has the potential to bind eight calcium ions, two type 1 and six type 2. The function of the type 2 sites is to facilitate structural rearrangements within gelsolin as part of the activation and actin-binding and severing processes. We propose the novel type 2 site in G6 to be the critical site that initiates overall activation of gelsolin by releasing the tail latch that locks calcium-free gelsolin in a conformation unable to bind actin.

Actin Depolymerizing Factors↗

PubMed2002

Zinc mediates assembly of the T1 domain of the voltage-gated K channel 4.2.

An intermolecular Zn(2+)-binding site was identified in the structure of the T1 domain of the Shaw-type potassium channels (aKv3.1). T1 is a BTB/POZ-type domain responsible for the ordered assembly of voltage-gated potassium channels and interactions with other macromolecules. In this structure, a Zn(2+) ion was found to be coordinated between each of the four assembly interfaces of the T1 tetramer by three Cys and one His encoded in the sequence motif (HX(5)CX(20)CC) of the T1 domain. This sequence motif is conserved among all non-Shaker-type voltage-dependent potassium (Kv) channels, but not in Shaker-type channels. The presence of this conserved Zn(2+)-binding site is a primary molecular determinant that distinguishes the tetrameric assembly of non-Shaker Kv channel subunits from that of Shaker channels. We report here that tetramerization of the Shal (rKv4.2) T1 in solution requires the presence of Zn(2+), and the addition/removal of Zn(2+) reversibly switches the protein between a stable tetrameric or monomeric state. We further show that the conversion from tetramers to monomers is profoundly pH-dependent: as the solution pH gets lower, the dissociation rate increases significantly. The unfolding energy of the T1 tetramer as a measure of the conformational stability of the structure is also pH-dependent. Surprisingly, at a lower pH we observe a distinctly altered conformational state of the T1 tetramer trapped during the process of unfolding of the T1 tetramer in the presence of Zn(2+). The conformational alteration may be responsible for increased rate of dissociation at lower pH by allowing Zn(2+) to be removed more effectively by EDTA. The ability of the T1 domain to adopt stable alternative conformations may be essential to its function as a protein-protein interaction/signaling domain to modulate the ion conduction properties of intact full-length Kv channels.

Amino Acid Motifs↗

PubMed2002

A mechanism of regulating transmembrane potassium flux through a ligand-mediated conformational switch.

The regulation of cation content is critical for cell growth. However, the molecular mechanisms that gate the systems that control K+ movements remain unclear. KTN is a highly conserved cytoplasmic domain present ubiquitously in a variety of prokaryotic and eukaryotic K+ channels and transporters. Here we report crystal structures for two representative KTN domains that reveal a dimeric hinged assembly. Alternative ligands NAD+ and NADH block or vacate, respectively, the hinge region affecting the dimer's conformational flexibility. Conserved, surface-exposed hydrophobic patches that become coplanar upon hinge closure provide an assembly interface for KTN tetramerization. Mutational analysis using the KefC system demonstrates that this domain directly interacts with its respective transmembrane constituent, coupling ligand-mediated KTN conformational changes to the permease's activity.

Amino Acid Sequence↗

PubMed2002

Regulation of the K channels by cytoplasmic domains.

Regulation of intracellular potassium levels is one of the basic functions of all cells, controlling cellular osmolarity and transmitting information. In higher organisms, elaborate control of transmembrane potassium flux has evolved to endow nervous systems with the remarkable ability to transmit electrical signals between cells. Multiple genes, gene splicing, mRNA editing, and selective tetrameric assembly of K channel genes provide the basis for creating distinct electrophysiological properties at varying developmental and cellular stages. This assembly mechanism, primarily governed by the T1 domain, is under the control of intracellular signals. Atomic structures of the isolated T1 domains of Shaker and Shaw subfamilies provided us with valuable structural insights into understanding both channel assembly and functional regulation of the entire channel molecule through conformational changes.

Binding Sites↗

PubMed2002

Potassium channel structures.

The molecular basis of K+ channel function is universally conserved. K+ channels allow K+ flux and are essential for the generation of electric current across excitable membranes. K+ channels are also the targets of various intracellular control mechanisms, such that the suboptimal regulation of channel function might be related to pathological conditions. Because of the fundamental role of K+ channels in controlling membrane excitability, a structural understanding of their function and regulation will provide a useful framework for understanding neuronal physiology. Many recent physiological and crystallographic studies have led to new insights into the workings of K+ channels.

Animals↗

PubMed2002

Excitability is mediated by the T1 domain of the voltage-gated potassium channel.

The T1 domain of voltage-gated K+ (Kv) channel is the N-terminal cytoplasmic part of the channel preceding the transmembrane pore domain of the channel. Several crystal structures of the T1 domain show that the four T1 subunits are arranged in a rotationally symmetric tetramer. The subunit interface of the T1 domain encodes the assembly specificity of intact functional Kv channels. Along the fourfold symmetry axis of the T1 tetramer, a water-filled cavity exists. K+ ions, however, do not pass through this T1 cavity. Instead, they are believed to enter the transmembrane pore through four identical inter-subunit spaces created between the membrane-facing C-terminal side of the T1 tetramer and the inner leaflet of the membrane. Several point mutations have been introduced into the putative membrane-facing region of the T1 tetramer. These mutations led to a systematic change of the channel's voltage sensitivity. Such functional change was accompanied by a distinct structural change in the C-terminal membrane-facing side of the T1 tetramer. Interestingly, a similar structural alteration that renders the channel more excitable is also induced by the binding of a cytoplasmic protein Kv beta subunit. Within this conformationally flexible part of the T1 tetramer, non-Shaker type Kv channel subunits invariably contain one Zn2+ per subunit. With the Kv4.2 T1, we demonstrated that the tetramer can be reversibly converted to monomers by chelating zinc away from the protein. The rate of removal of Zn2+ is pH-dependent. The structural ability of the T1 tetramer to alter conformation could be an essential property to mediate and process protein protein interaction events in the cytoplasm to control excitability of intact full-length Kv channels.

Animals↗