PubMed Health⌕ Search

Biomedical subjects

Shaojun Dong

Publications and source records attributed to Shaojun Dong.

At least 37 records · Page 2Linked to original sources
PubMed2006

Mercaptoethane sulfonate protected, water-soluble gold and silver nanoparticles: Syntheses, characterization and their building multilayer films with polyaniline via ion-dipole interactions.

Mercaptoethane sulfonate protected, water-soluble gold and silver nanoparticles (Au-MES and Ag-MES) are synthesized by one-phase method and characterized by TEM, TGA and XPS techniques, UV-vis and FTIR spectra. Both Au-MES and Ag-MES nanoparticles are soluble in the water up to 2.0 mg/ml and the stability of Au-MES is much better than that of Ag-MES. When dissolved in the water, they behave like a polyanion and can be used to build multilayer films with polyaniline (PANI) by way of layer-by-layer. A new approach is presented to fabricate the multilayer films of Au-MES/PANI and Ag-MES/PANI. The assembly mechanism of these multilayer films is also discussed. We anticipate highly conducting PANI films can be obtained by doping with these nanoparticles.

Journal Article↗
PubMed2006

Syntheses of fully sulfonated polyaniline nano-networks and its application to the direct electrochemistry of cytochrome c.

Fully sulfonated polyaniline nano-particles, nano-fibrils and nano-networks have been achieved for the first time by electrochemical homopolymerization of orthanilic acid using a three-step electrochemical deposition procedure in a mixed solvent of acetonitrile (ACN) and water. The diameter of the uniform nano-particles is about 60 nm, and the nano-fibrils can be organized in two-dimensional (2D) or three-dimensional (3D) non-periodic networks with good electrical contact. Average distance between contacts is about 850 and 600nm for a 2D and 3D system, respectively. The details of the poly(orthanilic acid) (POA) nano-structure were examined with a field emission scanning electron microscope (SEM). The structure and properties of POA were characterized with FTIR, UV-vis and electrochemical methods. The 3D POA nano-networks coated platinum electrode gave a direct electrochemical behavior of horse heart cytochrome c (Cyt c) immobilized on this electrode surface, a pair of well-defined redox waves with formal potential (E( degrees ')) of -0.032 V (versus Ag/AgCl) was achieved. The interaction between Cyt c and POA makes the formal potential shift negatively compared to that of Cyt c in solution. Spectrophotometric and electrochemical methods were used to investigate the interaction of Cyt c with POA. The immobilized Cyt c in the nano-networks POA film maintained its activity, showing a surface-controlled electrode process with the electron transfer rate constant (k(s)) of 21s(-1) and a of 0.53, and could be used for the electrocatalytic reduction of hydrogen peroxide. The quantitative determination of Cyt c by differential pulse voltammetry (DPV) using the fully sulfonated 3D POA nano-networks film coated platinum electrode was also studied.

Aniline Compounds↗
PubMed2006

Sequential deprotonation of meso-(p-hydroxyphenyl)porphyrins in DMF: from hyperporphyrins to sodium porphyrin complexes.

Sequential deprotonations of meso-(p-hydroxyphenyl)porphyrins (p-OHTPPH2) in DMF + H2O (V/V = 1:1) mixture have been verified to result in the appearance of hyperporphyrin spectra. However, when the deprotonations of these p-OHTPPH2 are carried out in DMF, the spectral changes differ considerably from those in the mixture mentioned above. At low [OH-], the optical spectra in the visible region are still considered to have characteristics of hyperporphyrin spectra. Further deprotonation at much higher basicity makes the optical spectra form three-banded spectra similar to those in the acidic solution. To clarify the molecular origins of these changes, UV-vis, resonance Raman (RR), proton nuclear magnetic resonance (1H NMR) experiments are carried out. Our data give evidence that p-OHTPPH2 in DMF can be further deprotonated of pyrrolic-H by higher concentrated NaOH, due to an aprotic medium like DMF effectively weakening the basicity of the porphyrin relative to that of the NaOH, and coordinates with two sodium ions (except the sodium ions that interact with the peripherial phenoxide anions) to form the sodium complexes of p-OHTPPH2 (Na2P, to lay a strong emphasis on the sodium ions that coordinate with the central nitrogen atom), which can be regarded as the porphyrin anions being perturbed by the sodium cations due to their highly ionic character. The negative centers generated by deprotonation of pyrrolic-H and phenolic-H are not thoroughly delocalized between the substituents and the porphyrin ring. Thus the negative centers generated by deprotonation of pyrrolic-H only act as electron-donating groups on the porphyrin pi system, and the negative charges of the phenoxide anion are also mainly localized on the peripheral substituents. As a result, the porphyrin pi orbitals cross over the phenoxide anion pi orbital and turn into HOMOs, which turns hyperporphyrin spectra of deprotonated phenolic-H of p-OHTPPH2 into three-banded spectra of regular metalloporphyrins.

Dimethylformamide↗
PubMed2006

Rapid synthesis of cubic Pt nanoparticles and their use for the preparation of Pt nanoagglomerates.

We report the synthesis of hexadecyltrimethylammonium bromide (CTAB)-stabilized cubic Pt nanoparticles by NaBH4 reduction of H2PtCl6 in aqueous CTAB solution. These Pt nanoparticles (average size of 7 nm) were well dispersed in aqueous solution and stable at least for 2 months. Addition of a trace amount of AgNO3 can alter the morphology of these Pt nanoparticles. More interestingly, the as-prepared uniform Pt nanoparticles were further developed into bigger Pt nanoagglomerates (approximately 20 to 47 nm) by a seed-mediate growth process. Dentritic and spherical Pt nanoagglomerates can be synthesized by altering the incubation time and their size can be tuned by controlling the amount of the seeds added.

Crystallization↗
PubMed2005

Facile preparation of amperometric laccase biosensor with multifunction based on the matrix of carbon nanotubes-chitosan composite.

The carbon nanotubes-chitosan (CNTs-CS) composite provides a suitable biosensing matrix due to its good conductivity, high stability, and good biocompatibility. Enzymes can be firmly incorporated into the matrix without the aid of other cross-linking reagents. The composite is easy to form insoluble film in solution above pH 6.3. Based on this, a facilely fabricated amperometric biosensor by entrapping laccase into the CNTs-CS composite film has been developed. At pH 6.0, the fungi laccase incorporated into the composite film remains better catalytic activity than that dissolved in solution. The system is in favor of the accessibility of substrate to the active site of laccase, thus the affinity to substrates is improved greatly, such as 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt (ABTS), catechol, and O2 with Km values of 19.86 microM, 9.43 microM, and 3.22 mM, respectively. The major advantages of the as-prepared biosensor are: detecting different substrates (ABTS, catechol, and O2), possessing high affinity and sensitivity, durable long-term stability, and facile preparation procedure. On the other hand, the system can be applied in fabrication of biofuel cells as the cathodic catalysts based on its good electrocatalysis for oxygen reduction. It can be extended to immobilize other enzymes and biomolecules, which will greatly facilitate the development of biosensors, biofuel cells, and other bioelectrochemical devices.

Biosensing Techniques↗
PubMed2005

An approach for fabricating self-assembled monolayer of Ag nanoparticles on gold as the SERS-active substrate.

In this paper, an approach for fabricating an active surface-enhanced Raman scattering (SERS) substrate is adopted. This approach is based on the assembling of silver nanoparticles film on gold substrate. Rhodamine 6G (R6G) and p-aminothiophenol (p-ATP) were used as probe molecules for SERS experiments, showing that this new active substrate has sensitivity to SERS response. Tapping-mode atomic force microscopy (AFM) was also used to investigate the surface morphology following the fabricating process of the active SERS substrate, which showed that large quantities of silver nanoparticles were uniformly coated on the substrate.

Aniline Compounds↗
PubMed2005

Parallel alignment of carbon nanotubes induced with inorganic molecules.

In this work, a new strategy is presented to form ordered multiwalled carbon nanotube (MWNT) arrays. The MWNTs are aligned horizontally and parallel in (3-aminopropyl)triethoxysilane (3-APTES) sol films on the surface of mica and glassy carbon (GC). 3-APTES is ready to form charged rodlike micelles, which play a key role in fabricating orderly MWNT arrays. Moreover, we prepare MWNT arrays on the surfaces of solid electrodes and detect the electrochemical response of the microarray electrodes for the Fe(CN)(6)3-/Fe(CN)6(4-) couple.

Journal Article↗
PubMed2005

Method for effective immobilization of Ru(bpy)(3)2+ on an electrode surface for solid-state electrochemiluminescene detection.

A novel method for effective immobilization of Ru(bpy)3(2+) on an electrode surface is developed. The whole process involves two steps: the electrostatic interactions between citrate-capped gold nanoparticles (AuNPs) and Ru(bpy)3Cl2 in aqueous medium were used to fabricate Ru(bpy)(3)2+-AuNP aggregates (Ru-AuNPs) first, and then the Au-S interactions between as-formed Ru-AuNPs and sulfhydryl groups were used to effectively immobilize the Ru-AuNPs on a sulfhydryl-derivated indium tin oxide (ITO) electrode surface. As-prepared ITO electrode shows excellent stability, and the ECL active species Ru(bpy)3(2+) contained therein exhibit excellent ECL behaviors.

Journal Article↗
PubMed2005

Biopolymer and carbon nanotubes interface prepared by self-assembly for studying the electrochemistry of microperoxidase-11.

Stable films of biopolymer chitosan and carbon nanotubes were prepared by a layer-by-layer self-assembly technique. Atomic force microscopy, scanning electron microscopy, cyclic voltammetry, and UV-vis spectroscopy were used to characterize the film assembly. Atomic force microscopy and scanning electron microscopy showed that an even, stable film was formed. The UV-vis spectroscopy and cyclic voltammetry study indicated the uniform growth of the film. The property of the self-assembled multilayer film in promoting protein electron transfer was demonstrated by incorporating microperoxidase-11 in the film. Microperoxidase-11 in the multilayer film could transfer electrons with the electrode indicating that carbon nanotubes could wire the protein to the electrode. The electrocatalytic activity of the microperoxidase-11 containing multilayer film-modified electrode toward H(2)O(2) and O(2) was investigated. The results showed that along with the increase in the assembled layers the electrocatalytic reduction potentials of H(2)O(2) and O(2) shifted positively. The prepared multilayer film of chitosan and carbon nanotubes containing protein was a sensitive interface for electrocatalytic study.

Biopolymers↗
PubMed2005

Spectrometric and voltammetric investigation of interaction of neutral red with calf thymus DNA: pH effect.

The interaction of neutral red (NR) with calf thymus DNA (CT DNA) was investigated by spectrometric (UV-vis, circular dichroism and fluorescence) and voltammetric techniques. It was shown that the interaction of NR with DNA depended on the values of R (R is defined as the ratio of the concentration of NR to that of CT DNA) and pH of the solution. NR intercalated into CT DNA base pairs at lower R value (R < 2.4) and following by NR aggregating along the helical surface of DNA at higher R value (R > 2.4) in pH 6.0 solution. Interestingly, we found that at lower R value, NR intercalated into CT DNA with its long axis perpendicular or parallel to the dyad axis of DNA in the solution of pH 6.0. While in pH 7.0 solution, NR bound with CT DNA through intercalation and electrostatic interactions. The electrochemical inactive complexes, NR-2CT DNA, 3NR-CT DNA, and NR-CT DNA were formed when NR interacted with nucleic acids in pH 6.0 and 7.2 solutions, respectively. The corresponding intrinsic binding constants for these complexes were obtained by UV-vis and fluorescence spectrometric methods, respectively. The CD spectra showed that the conformation of CT DNA was converted from right-handed B-DNA to left-handed Z-DNA due to the aggregating of NR along the surface of DNA in pH 6.0 solution, whereas a conversion from B-DNA to C-DNA was induced due to the interaction of DNA with NR in pH 7.2 solution. Finally, two binding modes of NR with CT DNA in aqueous with different values of pH were shown in the scheme.

Animals↗
PubMed2005

Spontaneous fractal aggregation of gold nanoparticles and controlled generation of aggregate-based fractal networks at air/water interface.

The spontaneous fractal aggregation of as-prepared cetytrimethylammonium bromide (CTAB)-capped gold nanoparticles was found to happen at the air/water interface after spreading their chloroform solution on water surfaces. Aided by Langmuir-Blodgett techniques, these fractal aggregates can be interconnected with each other to form aggregate-based fractal networks.

Journal Article↗
PubMed2005

Fabrication, characterization, and application in SERS of self-assembled polyelectrolyte-gold nanorod multilayered films.

An effective and facile approach for the preparation of multilayered nanostructure of gold nanorods (Au NRs) has been demonstrated. Linear polyethylenimine (LPEI) was selected as a polymeric adhesive layer, and an anionic polyelectrolyte poly(sodium styrenesulfonate) (PSS) was used as the linker of the positively charged Au NRs in multilayered nanostructure. They were deposited onto the LPEI-modified indium-doped tin oxide (ITO) substrate alternately using the layer-by-layer assembly technique via electrostatic interactions. The plasmonic property of the multilayered nanostructure of Au NRs is tunable by the controlled self-assembly process. FE-SEM was used to study the morphologies of the resulted substrates with Au NRs monolayer membrane and with Au NRs multilayered membrane. More importantly, it was found that the multilayered NRs films could be used as a surface-enhanced Raman spectroscopy (SERS) substrate for probing 4-aminothiophenol (4-ATP).

Journal Article↗
PubMed2005

Small molecules as cross-linkers: fabrication of carbon nanotubes/thionine self-assembled multilayers on amino functionalized surfaces.

Electroactive and photoactive thionine molecules have been selected as cross-linkers to construct self-assembled multilayers containing carbon nanotubes (CNTs)via the alternate layer deposition technique. The resulting multilayer system can electrocatalyze the oxidation of NADH and offer potential applications in other fields such as biosenors and photovoltaic devices.

Journal Article↗
PubMed2005

Rapid preparation and characterization of uniform, large, spherical Ag particles through a simple wet-chemical route.

In this article we report the rapid preparation of uniform, large, spherical Ag particles through a simple wet-chemical route. The formation of Ag particles with about 750 nm in diameter occurs in a single process, carried out by direct mix of AgNO3 aqueous solution and ortho-phenylenediamine N-methyl-2-pyrrolidone solution at room temperature, producing a relatively low-polydispersity product. It is also found that raising the temperature results in larger particles. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectra have been used to characterize the resulting product.

Particle Size↗
PubMed2005

Coordination-induced formation of submicrometer-scale, monodisperse, spherical colloids of organic-inorganic hybrid materials at room temperature.

In this communication, we demonstrate a novel coordination-based strategy to the fabrication of submicrometer-scale, monodisperse, spherical colloids of organic-inorganic hybrid materials, carried out by mixing H2PtCl6 and p-phenylenediamine (PPD) aqueous solutions at room temperature. The particle size and polydispersity can be controlled by the molar ratio and concentration of reactants, and the optimum experimental parameters for the production of monodisperse colloids are also given.

Colloids↗
PubMed2005

Electrochemical thinning of thicker gold film with qualified thickness for surface plasmon resonance sensing.

To meet the requirement of surface plasmon resonance (SPR) sensing, controlling the thickness of the gold film is very important. Here, we report an efficient and simple approach to prepare a SPR-active substrate when the thickness of the gold film is larger than the optimizing 50 nm and smaller than 100 nm. This method is based on anodic electrodissolution of gold in electrolyte containing chloride ions. Using this method, the thickness of gold films can be easily changed at a nanometer scale by controlling the number of potential scans and the concentrations of chloride ions in the electrolyte. At the same time, the influence of gold film thickness on the SPR signal is recorded by SPR in real time. To assess the change of the surface roughness and morphology of gold film through anodic electrodissolution, atomic force microscopy was used. The surface roughness of the same Au film before and after anodic electrodissolution is 1.179 and 2.767 nm, respectively. The change of the surface roughness of Au film brings out a slight angle shift of SPR. This indicates that surface electrodissolution of the gold does not affect the character of the original bulk film and this film can be used for SPR experiments. To confirm our expectation, a simple adsorption experiment of cytochrome c (Cyt c) on the gold film treated with anodic electrodissolution modified by 11-mercaptoundecanic acid was carried out. The angle shift of SPR confirmed the adsorption of Cyt c, and the cyclic voltammetry of Cyt c provided a complementary confirmation for the adsorption of Cyt c. These results show that this approach provides a good way to change the thicker gold film to an optimized thickness of SPR sensing. The great advantage brought by this approach is in that it can convert the waste gold films with greater thicknesses fabricated by the vacuum deposition method or other methods into useful materials as active SPR substrates.

Journal Article↗
PubMed2005

A low-cost biofuel cell with pH-dependent power output based on porous carbon as matrix.

A glucose/O2 biofuel cell (BFC) possessing a pH-dependent power output was fabricated by taking porous carbon (PC) as the matrix to load glucose oxidase or fungi laccase as the catalysts. The electrolytes in the anode and cathode compartments contain ferrocene monocarboxylic acid and 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt as the mediators, respectively. The power of the BFC was enhanced significantly by using PC as the matrix, rather than glassy carbon electrode. Additionally, the power output of the BFC decreases as the pH of the solution increases from 4.0 to 7.0, which provides a simple and efficient method to achieve the required power output. More importantly, the BFC can operate at pH 6.0, and even at pH 7.0, which overcomes the requirement for cathode solutions of pH<5.0 when using fungi laccase as a catalyst. Operation of the BFC at neutral pH may provide a means to power medical devices implanted in physiological systems. The facile and low-cost fabrication of this BFC may enable its development for other applications.

Carbon↗