Biomedical subjects

T L Wheeler

Publications and source records attributed to T L Wheeler.

At least 19 recordsLinked to original sources

PubMed2007

Evaluation in beef cattle of six deoxyribonucleic acid markers developed for dairy traits reveals an osteopontin polymorphism associated with postweaning growth.

The objectives of this study were to 1) estimate the allelic frequencies in US beef cattle of 6 DNA markers reported to be associated with variation in dairy production traits; and 2) evaluate the association of these markers with beef production traits. Several genetic markers have been associated with milk yield or composition, including polymorphisms in secreted phosphoprotein 1 (SPP1; also called osteopontin), growth hormone receptor (GHR), casein S1 (CSN1S1), diacylglycerol O-acyltransferase 1 (DGAT1), peroxisome proliferator-activated receptor gamma co-activator-1alpha (PPARGC1A), and ATP-binding cassette subfamily G (white) member 2 (ABCG2). Allelic frequencies for these 6 markers, and their association with 21 phenotypes, were evaluated in 2 crossbred beef cattle populations that sample influential industry sires. Five of 6 markers were segregating in beef cattle populations; the exception was ABCG2. The SPP1 marker was associated with yearling weight (P = 0.025), live weight at slaughter (P = 0.016), postweaning ADG (P = 0.007), and HCW (P = 0.007) in a large, multisire population representing the 7 most populous beef breeds in the United States. Postweaning growth trait associations were confirmed in an independent population of similar construction, including sires from tropically adapted breeds. The SPP1 marker was associated with yearling weight (P = 0.034), live weight at slaughter (P = 0.011), and postweaning ADG (P = 0.015) and showed a trend toward association with HCW (P = 0.083) in this population. Whereas DGAT1, GHR, and CSN1S1 polymorphisms showed association with some traits in individual populations, the lack of consistent predictive merit between populations indicates they may not be suited for beef cattle selection. No significant associations were observed for the PPARGC1A marker and any of 21 recorded traits, indicating this marker had no apparent value in selection for the beef cattle traits tested in these populations. The SPP1 marker had consistent associations and effect sizes (10.5 to 11.5 kg of live weight at slaughter) in both populations, providing strong evidence for utility of the SPP1 marker for postweaning growth in beef cattle.

Animals↗

PubMed2006

Effects of calpastatin and micro-calpain markers in beef cattle on tenderness traits.

The objective of this study was to assess the association of single nucleotide polymorphisms (SNP) developed at the calpastatin (CAST) and mu-calpain (CAPN1) genes with meat tenderness and palatability traits in populations with diverse genetic backgrounds. Three populations were used in the study. One population consisted of Bos taurus that included crossbred animals derived from Hereford, Angus, Red Angus, Limousin, Charolais, Gelbvieh, and Simmental (GPE7; n = 539). Another population consisted of Bos taurus with Bos indicus influence, including crossbred animals from Hereford, Angus, Brangus, Beefmaster, Bonsmara, and Romosinuano (GPE8; n = 580). The third population was Bos indicus and consisted of purebred Brahman (STARS; n = 444). Traits evaluated were meat tenderness measured as Warner-Bratzler shear force (WBSF; kg) at 14 d postmortem, and traits evaluated by trained sensory panels that included tenderness score, juiciness, and flavor intensity. A SNP at the CAST gene had a significant (P < 0.003) effect on WBSF and tenderness score in the GPE7 and GPE8 populations. Animals inheriting the TT genotype at CAST had meat that was more tender than those inheriting the CC genotype. The marker at the CAPN1 gene was significant (P < 0.03) for tenderness score in GPE7 and GPE8. Animals inheriting the CC genotype at CAPN1 had meat that was more tender than those inheriting the TT genotype. Markers at the CAST and CAPN1 genes were associated with flavor intensity in the GPE8 population. Animals inheriting the CC genotype at CAST and the TT genotype at CAPN1 produced steaks with an intense flavor when compared with the other genotypes. An interaction between CAST and CAPN1 was detected (P < 0.05) for WBSF on GPE8. The statistical significance of the interaction is questionable because of the limited number of observations in some cells. Markers developed at the CAST and CAPN1 genes are suitable for use in identifying animals with the genetic potential to produce meat that is more tender.

Animals↗

PubMed2005

Identification of genetic markers for fat deposition and meat tenderness on bovine chromosome 5: development of a low-density single nucleotide polymorphism map.

As genetic markers, SNP are well suited for the development of genetic tests for production traits in livestock. They are stable through many generations and can provide direct assessment of individual animal's genetic merit if they are in linkage disequilibrium and phase with functional genetic variation. Bovine chromosome 5 has been shown to harbor genetic variation affecting production traits in multiple cattle populations; thus, this chromosome was targeted for SNP-based marker development and subsequent association analysis with carcass and growth phenotypes. Discovery of SNP was performed in a panel of 16 sires representing two sires from each of seven beef breeds and two Holstein sires by PCR amplification and sequencing using primers designed from genomic sequence obtained by low-coverage sequencing of bacterial artificial chromosome (BAC) clones. From 550 SNP, 296 (54%) were tentatively identified as having a minor allele frequency >10%. Forty-five SNP derived from 15 BAC were chosen based on minor allele frequency and were genotyped in 564 steers and their sires. Production and carcass data were collected on the steers as a part of the Germplasm Evaluation (GPE), Cycle VII Project at the U.S. Meat Animal Research Center (Clay Center, NE), which involves of the evaluation of sires from seven of the most popular U.S. breeds. Haplotypes based on seven SNP derived from a BAC containing the bovine genes HEM1 and PDE1B were associated with traits related to carcass fat. Steers homozygous for the major haplotype had 0.15 +/- 0.04 cm less subcutaneous fat, 0.57 +/- 0.18 kg less rib fat, 0.18 +/- 0.07 lower yield grade, 1.11 +/- 0.35% less predicted fat yield, and 0.79 +/- 0.3% greater predicted retail product yield than heterozygotes. The frequency of the major haplotype was 0.70 in the steers, and it ranged from 0.44 (Limousin) to 0.98 (Simmental and Gelbvieh) in a panel consisting of an average of 20 purebred sires from each of the seven breeds. A second set of haplotypes based on four SNP derived from a BAC containing the genes NOL1 and CHD4 was associated with Warner-Bratzler shear force. Steers homozygous for the major haplotype had 0.27 +/- 0.11 kg greater shear force than those heterozygous for the major haplotype and one of two minor haplotypes. The frequency of the major haplotype was 0.59 in the steers and ranged from 0.27 (Hereford) to approximately 0.95 (Angus and Red Angus) in the panel of purebred sires. These results demonstrate the feasibility of targeting QTL regions for SNP-based marker development and that a low level of coverage can identify markers associated with phenotypic traits.

Adipose Tissue↗

PubMed2005

Characterization of biological types of cattle (Cycle VII): Carcass, yield, and longissimus palatability traits.

The objective of this experiment was to provide a current evaluation of the seven most prominent beef breeds in the United States and to determine the relative changes that have occurred in these breeds since they were evaluated with samples of sires born 25 to 30 yr earlier. Carcass (n = 649), yield (n = 569), and longissimus thoracis palatability (n = 569) traits from F(1) steers obtained from mating Hereford, Angus, and MARC III cows to Hereford (H), Angus (A), Red Angus (RA), Charolais (C), Limousin (L), Simmental (S), or Gelbvieh (G) sires were compared. Data were adjusted to constant age (445 d), carcass weight (363 kg), fat thickness (1.1 cm), fat trim percent (25%), and marbling (Small(35)) endpoints. For Warner-Bratzler shear force and trained sensory panel traits, data were obtained on LM from steaks stored at 2 degrees C for 14 d postmortem. The following comparisons were from the age-constant endpoint. Carcasses from L-, G-, and H-sired steers (361, 363, and 364 kg, respectively) were lighter (P < 0.05) than carcasses from steers from all other sire breeds. Adjusted fat thickness for carcasses from A-, RA-, and H-sired steers (1.5, 1.4, and 1.3 cm, respectively) was higher (P < 0.05) than for carcasses from steers from all other sire breeds (0.9 cm). Longissimus muscle areas were largest (P < 0.05) for carcasses from L-, C-, S-, and G-sired steers (89.9, 88.7, 87.6, and 86.5 cm(2), respectively) and smallest for carcasses from H- and RA-sired steers (79.5 and 78.4 cm(2)). A greater (P < 0.05) percentage of carcasses from RA- and A-sired steers graded USDA Choice (90 and 88%, respectively) than from carcasses from other sire breeds (57 to 66%). Carcass yield of boneless, totally trimmed retail product was least (P < 0.05) for RA- and A-sired steers (59.1 and 59.2%, respectively) and greatest (P < 0.05) for G, L-, C-, and S-sired steers (63.0 to 63.8%). Longissimus muscle from carcasses of A-sired steers (4.0 kg) had lower (P < 0.05) Warner-Bratzler shear force values than LM from carcasses of G- and C-sired steers (4.5 to 4.3 kg, respectively). Trained sensory panel tenderness and beef flavor intensity ratings for LM did not differ (P < 0.05) among the sire breeds. Continental European breeds (C, L, S, and G) were still leaner, more heavily muscled, and had higher-yielding carcasses than did British breeds (H, A, and RA), with less marbling than A or RA, although British breeds have caught up in growth rate.

Adipose Tissue↗

PubMed2005

Beef customer satisfaction: factors affecting consumer evaluations of calcium chloride-injected top sirloin steaks when given instructions for preparation.

The objectives of this study were to evaluate whether instructions can help consumers properly prepare top sirloin steaks and to evaluate the use of calcium chloride injection to decrease the sensitivity of top sirloin steaks to degree of doneness, thereby improving customer satisfaction ratings. An in-home study evaluated top sirloin steaks (gluteus medius) as influenced by calcium chloride injection (injected vs. noninjected), consumer segment (beef loyalists = heavy consumers of beef, budget rotators = cost-driven and split meat consumption between beef and chicken, and variety rotators = higher incomes and education and split meat consumption among beef, poultry, and other foods), degree of doneness, cooking method, and instructions (given vs. not given). Consumers evaluated overall like, tenderness, juiciness, flavor like, and flavor amount using 10-point scales. Beef loyalists consistently rated steaks higher for overall like, juiciness, and flavor when instructions were provided (P < 0.05) and rated top sirloin steaks higher for overall like and tenderness when given instructions for grilling (P < 0.05). Budget rotators and variety rotators rated steaks differently among cooking methods (P < 0.05). Correlation and stepwise regression analyses indicated that flavor like was the most highly correlated with overall like, followed by tenderness, flavor amount, and juiciness. Calcium chloride injection had no effect on consumers' likes or dislikes or on tenderness (P < 0.05). For top sirloin steaks, it was likely that preparation played a major role in consumer satisfaction, and beef loyalists benefited the most from providing cooking instructions.

Animals↗

PubMed2005

Beef customer satisfaction: USDA quality grade and marination effects on consumer evaluations of top round steaks.

An in-home beef study evaluated consumer ratings of top round steaks (semimembranosus) as influenced by USDA quality grade (top Choice or high Select), city (Chicago or Philadelphia), consumer segment (beef loyalists = heavy consumers of beef; budget rotators = cost-driven and split meat consumption between beef and chicken; and variety rotators = higher incomes and education and split meat consumption among beef, poultry, and other foods), degree of doneness, cooking method, and marination. Consumers evaluated each steak for overall like, tenderness, juiciness, flavor like, and flavor amount using 10-point scales (1 = dislike extremely, not at all tender, not at all juicy, dislike extremely, and none at all to 10 = like extremely, extremely tender, extremely juicy, like extremely, and an extreme amount of flavor, respectively). Quality grade affected several consumer sensory traits, with top Choice receiving higher (P < or = 0.004) tenderness, juiciness, and flavor like scores than high Select. Consumers in Chicago rated steaks cooked "medium and less" higher for overall like, tenderness, juiciness, flavor like, and flavor amount than those in Philadelphia (city x degree of doneness; P < or = 0.020). Steaks braised by customers in Philadelphia received among the highest scores for overall like, tenderness, juiciness, flavor like, and flavor amount compared with any cooking method used by customers in Chicago (cooking method x city; P < or = 0.026). Overall like and flavor amount ratings were least (P < 0.05) for steaks that were marinated and cooked to "medium and less" degree of doneness (marination x degree of doneness; P < or = 0.014). Braised steaks received among the highest values for overall like, tenderness, juiciness, flavor like, and flavor amount when cooked to "medium and less" or "medium well and more" (cooking method x degree of doneness; P < or = 0.008). Correlation and stepwise regression analysis indicated that flavor like was pivotal in customers' satisfaction with top round steaks, and was the sensory trait most highly correlated to overall like, followed by tenderness, flavor amount, and juiciness. Preparation of top round steaks was crucial in consumers' likes and dislikes, and by improving flavor, higher consumer satisfaction may be achieved.

Animals↗

PubMed2005

A new single nucleotide polymorphism in CAPN1 extends the current tenderness marker test to include cattle of Bos indicus, Bos taurus, and crossbred descent.

The three objectives of this study were to 1) test for the existence of beef tenderness markers in the CAPN1 gene segregating in Brahman cattle; 2) test existing CAPN1 tenderness markers in indicus-influenced crossbred cattle; and 3) produce a revised marker system for use in cattle of all subspecies backgrounds. Previously, two SNP in the CAPN1 gene have been described that could be used to guide selection in Bos taurus cattle (designated Markers 316 and 530), but neither marker segregates at high frequency in Brahman cattle. In this study, we examined three additional SNP in CAPN1 to determine whether variation in this gene could be associated with tenderness in a large, multisire American Brahman population. One marker (termed 4751) was associated with shear force on postmortem d 7 (P < 0.01), 14 (P = 0.015), and 21 (P < 0.001) in this population, demonstrating that genetic variation important for tenderness segregates in Bos indicus cattle at or near CAPN1. Marker 4751 also was associated with shear force (P < 0.01) in the same large, multisire population of cattle of strictly Bos taurus descent that was used to develop the previously reported SNP (referred to as the Germplasm Evaluation [GPE] Cycle 7 population), indicating the possibility that one marker could have wide applicability in cattle of all subspecies backgrounds. To test this hypothesis, Marker 4751 was tested in a third large, multisire cattle population of crossbred subspecies descent (including sire breeds of Brangus, Beefmaster, Bonsmara, Romosinuano, Hereford, and Angus referred to as the GPE Cycle 8 population). The highly significant association of Marker 4751 with shear force in this population (P < 0.001) confirms the usefulness of Marker 4751 in cattle of all subspecies backgrounds, including Bos taurus, Bos indicus, and crossbred descent. This wide applicability adds substantial value over previously released Markers 316 and 530. However, Marker 316, which had previously been shown to be associated with tenderness in the GPE Cycle 7 population, also was highly associated with shear force in the GPE Cycle 8 animals (P < 0.001). Thus, Marker 316 may continue to be useful in a variety of populations with a high percentage of Bos taurus backgrounds. An optimal marker strategy for CAPN1 in many cases will be to use both Markers 316 and 4751.

Animals↗

PubMed2004

Association of markers in the bovine CAPN1 gene with meat tenderness in large crossbred populations that sample influential industry sires.

Two previously identified single-nucleotide polymorphism markers located within the micromolar calcium-activated neutral protease gene (CAPN1) were evaluated for their association with variation in meat tenderness using one commercial sample of Simmental x Angus crossbred calves and one multibreed, crossbred research herd. The commercial sample included 362 animals sired by 23 registered Simmental bulls bred to unregistered Angus cows and represented current industry animals in which to test the predictive merit of the markers. The second sample was a research herd including 564 steers from the Germplasm Evaluation Cycle VII population at the U.S. Meat Animal Research Center, produced with semen from popular sires of the seven Bos taurus beef breeds with the most registrations in the United States (Angus, Charolais, Gelbvieh, Hereford, Limousin, Red Angus, and Simmental) on Angus, Hereford, and MARC III cows. These animals form a relatively outbred population that constituted a stringent test of the predictive merit of the genetic markers, although small groups were half-sibs. Warner-Bratzler shear force measurements were used to determine tenderness phenotypes for all animals. The populations were genotyped for two markers that predict variation at amino acid positions 316 and 530 of the mu-calpain polypeptide, produced by the CAPN1 gene. Minor allele frequencies for markers 316 and 530 in the commercial sample were 0.17 and 0.37, respectively, and in the Cycle VII animals, were 0.20 and 0.28, respectively. Both markers showed association with shear force in the commercial sample (P = 0.04) and the Cycle VII population (P = 0.02), supporting the hypothesis that they represent potential markers to aid selection for improved meat tenderness in commercial populations of beef cattle in the United States.

Alleles↗

PubMed2004

Technical note: use of belt grill cookery and slice shear force for assessment of pork longissimus tenderness.

The present experiments were conducted to determine whether improved beef longissimus shear force methodology could be used to assess pork longissimus tenderness. Specifically, three experiments were conducted to: 1) determine the effect of belt grill (BG) cookery on repeatability of pork longissimus Warner-Bratzler shear force (WBSF), 2) compare the correlation of WBSF and slice shear force (SSF) with trained sensory panel tenderness ratings, and 3) estimate the repeatability of pork longissimus SSF for chops cooked with a BG. In Exp. 1 and 2, the longissimus was removed from the left side of each carcass (Exp. 1, n = 25; Exp. 2, n = 23) at 1 d postmortem and immediately frozen to maximize variation in tenderness. In Exp. 1, chops were cooked with either open-hearth electric broilers (OH) or BG, and WBSF was measured. Percentage of cooking loss was lower (P < 0.001) and less variable for chops cooked with a BG (23.2%; SD = 1.7%) vs. OH (27.6%; SD = 3.0%). Estimates of the repeatability of WBSF were similar for chops cooked with OH (0.61) and BG (0.59). Although significant (P < 0.05), differences in WBSF (4.1 vs. 3.9 kg) between cooking methods accounted for less than 5% of the total variation in WBSF. In Exp. 2, the correlation of SSF (r = -0.72; P < 0.001) with trained sensory panel tenderness ratings was slightly stronger than the correlation of WBSF (r = -0.66; P < 0.001) with trained sensory panel tenderness ratings, indicating that the two methods had a similar ability to predict tenderness ratings. In Exp. 3, duplicate samples from 372 carcasses at 2 and 10 d postmortem were obtained, cooked with BG, and SSF was determined. The repeatability of SSF was 0.90, which is comparable to repeatability estimates for beef and lamb. Use of BG cookery and SSF could facilitate the collection of accurate pork longissimus tenderness data. Time and labor savings associated with BG cookery and the SSF technique should help to decrease research costs.

Animals↗

PubMed2004

Variation in palatability and biochemical traits within and among eleven beef muscles.

The objective of this study was to determine the extent of variation in, and relationships among, biochemical and palatability traits within and among 11 major beef muscles. Longissimus thoracis et lumborum (LD), psoas major (PM), gluteus medius (GM), semimembranosus (SM), adductor (AD), biceps femoris (BF), semitendinosus (ST), rectus femoris (RF), triceps brachii (TB), infraspinatus (IS), and supraspinatus (SS) from one side of 31 Charolais x MARC III steer carcasses were vacuum-packaged, stored at 2 degrees C until 14 d postmortem, and then frozen at -30 degrees C. The 2.54-cm-thick steaks were obtained from two or three locations within muscles in order to assess biochemical traits and Warner-Bratzler shear force, and from near the center for sensory trait evaluation. The PM was most tender and was followed by IS in both shear force and tenderness rating (P < 0.05). The other muscles were not ranked the same by shear force and tenderness rating. The BF had the lowest (P < 0.05) tenderness rating. The PM, GM, and LD had lower (P < 0.05) collagen concentration (2.7 to 4.5 mg/g muscle) than muscles from the chuck and round (5.9 to 9.0 mg/g), except for the AD (4.9 mg/g). Desmin proteolysis was highest (P < 0.05) for BF and LD (60.7 and 60.1% degraded), and was lowest (P < 0.05) for PM (20.2%). The PM, TB, IS, RF, and ST had relatively long sarcomere lengths (> 2.1 microm), whereas the GM had the shortest (P < 0.05) sarcomere length (1.7 microm). Cooking loss was lowest (P < 0.05) for BF (18.7%) and was followed by LD and IS (20.7%); it was highest (P < 0.05) for ST (27.4%). Across all muscles, tenderness rating was highly correlated (r > 0.60) with shear force, connective tissue rating, sarcomere length, and collagen content. Within a muscle, correlations among all traits were generally highest in LD and lowest in AD. Within muscle, location effects were detected (P < 0.05) for shear force (PM, ST, BF, SM, and RF), sarcomere length (PM, ST, BF, LD, SS, IS, SM, and RF), collagen concentration (PM, BF, SS, IS, SM. AD, TB, and RF), desmin degradation (PM, GM, BF, SM, AD, and, RF), and cooking loss (all muscles except SS and AD). There is a large amount of variation within and among muscles for tenderness traits and tenderness-related biochemical traits. These results increase our understanding of the sources of variation in tenderness in different muscles and provide a basis for the development of muscle-specific strategies for improving the quality and value of muscles.

Animals↗

PubMed2004

The accuracy and repeatability of untrained laboratory consumer panelists in detecting differences in beef longissimus tenderness.

The objective of this study was to determine the accuracy and repeatability of untrained laboratory consumer panelists in detecting differences in beef longissimus tenderness. At 14 d postmortem, slice shear force was measured on one steak from 192 strip loins and used to select 54 strip loins and assign 18 of the strip loins to each of three tenderness classes (tender = < 15 kg, intermediate = 15 to 27 kg, and tough = > 27 kg). Sixty-eight untrained, laboratory consumer panelists evaluated paired steaks from each tenderness class in each of two sessions (12 total observations per panelist). Mean slice shear forces for "tender," "intermediate," and "tough" were 11.1, 21.0, and 32.2 kg, respectively. Mean tenderness ratings of the untrained laboratory consumer panel were different (P < 0.05) among tenderness classes (mean of 16 panelists = 6.2, 4.9, and 3.3 for tender, intermediate, and tough, respectively), and these differences were similar regardless of how many untrained panelists were averaged to determine the panel mean (4, 8, 12, or 16). The correlations (P < 0.01) between slice shear force and the mean untrained consumer panel tenderness rating (mean of 4, r = -0.82; mean of 8, r = -0.89; mean of 12, r = -0.91; and mean of 16, r = -0.92;) were similar. Overall repeatability of the untrained consumer panel was 0.80. Repeatability of individual untrained consumer panelists for tenderness rating was highly variable: 31% were > 0.80, 36% were 0.60 to 0.79, and 33% were < 0.60. Thirty-two percent of the consumers were both accurate (correlation to slice shear force = -0.75 to -1.00, P < 0.01) and repeatable (repeatability > 0.75). There is wide variability in the ability of untrained laboratory consumer panelists to detect differences in beef tenderness. Nonetheless, untrained consumer panels can accurately and repeatedly detect differences in beef tenderness under controlled laboratory conditions. An untrained laboratory consumer panel may be able to provide as effective an evaluation of beef longissimus tenderness as a trained descriptive attribute panel.

Adult↗

PubMed2004

Evaluation of sampling, cookery, and shear force protocols for objective evaluation of lamb longissimus tenderness.

Experiments were conducted to compare the effects of two cookery methods, two shear force procedures, and sampling location within non-callipyge and callipyge lamb LM on the magnitude, variance, and repeatability of LM shear force data. In Exp. 1, 15 non-callipyge and 15 callipyge carcasses were sampled, and Warner-Bratzler shear force (WBSF) was determined for both sides of each carcass at three locations along the length (anterior to posterior) of the LM, whereas slice shear force (SSF) was determined for both sides of each carcass at only one location. For approximately half the carcasses within each genotype, LM chops were cooked for a constant amount of time using a belt grill, and chops of the remaining carcasses were cooked to a constant endpoint temperature using open-hearth electric broilers. Regardless of cooking method and sampling location, repeatability estimates were at least 0.8 for LM WBSF and SSF. For WBSF, repeatability estimates were slightly higher at the anterior location (0.93 to 0.98) than the posterior location (0.88 to 0.90). The difference in repeatability between locations was probably a function of a greater level of variation in shear force at the anterior location. For callipyge LM, WBSF was higher (P < 0.001) at the anterior location than at the middle or posterior locations. For non-callipyge LM, WBSF was lower (P < 0.001) at the anterior location than at the middle or posterior locations. Consequently, the difference in WBSF between callipyge and non-callipyge LM was largest at the anterior location. Experiment 2 was conducted to obtain an estimate of the repeatability of SSF for lamb LM chops cooked with the belt grill using a larger number of animals (n = 87). In Exp. 2, LM chops were obtained from matching locations of both sides of 44 non-callipyge and 43 callipyge carcasses. Chops were cooked with a belt grill and SSF was measured, and repeatability was estimated to be 0.95. Repeatable estimates of lamb LM tenderness can be achieved either by cooking to a constant endpoint temperature with electric broilers or cooking for a constant amount of time with a belt grill. Likewise, repeatable estimates of lamb LM tenderness can be achieved with WBSF or SSF. However, use of belt grill cookery and the SSF technique could decrease time requirements which would decrease research costs.

Animals↗

PubMed2004

Characterization of biological types of cattle (Cycle VI): carcass, yield, and longissimus palatability traits.

Carcass (n = 568) and longissimus thoracis palatability (n = 460) traits from F1 steers obtained from mating Hereford (H), Angus (A), and U.S. Meat Animal Research Center (MARC) III cows to H, A, Norwegian Red (NR), Swedish Red and White (RW), Friesian (F), or Wagyu (W) sires were compared. Data were adjusted to constant age (471 d), carcass weight (356 kg), fat thickness (1.0 cm), percentage of fat trim (24%), and marbling (Small35) end points. For Warner-Bratzler shear force and trained sensory panel traits, data were obtained on longissimus thoracis steaks stored at 2 degrees C for 14 d postmortem. The following comparisons were from the age-constant end point. Carcasses from H- and A-sired steers (377 and 374 kg, respectively) were the heaviest (P < 0.05) and carcasses from W-sired steers (334 kg) were the lightest (P < 0.05). A greater (P < 0.05) percentage of carcasses from A- and W-sired steers graded USDA Choice (88 and 85%, respectively) than carcasses from other sire breeds (52 to 71%). Adjusted fat thickness for carcasses from A-sired steers (1.3 cm) was highest (P < 0.05), followed by H-sired steers (1.1 cm) and W- and F-sired steers (0.9 cm); NR- and RW-sired steers (0.8 cm) had the lowest (P < 0.05) adjusted fat thickness. Longissimus thoracis area was not different (P > 0.05) among sire breeds (mean = 80.6 cm2). Carcass yield of boneless, totally trimmed retail product was least (P < 0.05) for A-sired steers (60.1%), intermediate for H-sired steers (61.5%), and similar (P > 0.05) for all other sire breeds (62.5 to 62.8%). Longissimus thoracis steaks from carcasses of A- (3.7 kg) and W-sired (3.7 kg) steers had lower (P < 0.05) shear force values than longissimus thoracis steaks from other sire breeds (4.1 to 4.2 kg). Trained sensory panel tenderness, juiciness, or beef flavor intensity ratings for longissimus thoracis steaks did not differ (P > 0.05) among the sire breeds. Sire breed comparisons were affected by adjusting data to other end points. Heritability estimates for various carcass, yield, and palatability traits ranged from very low (h2 = 0.06 for percentage of kidney, pelvic, and heart fat) to relatively high (h2 = 0.71 for percentage of retail product yield). Relative to the other sire breeds, W-sired steers had the highest percentage of USDA Choice, Yield grade 1 and 2 carcasses, but their carcasses were the lightest.

Adipose Tissue↗

PubMed2004

Indicators of tenderization are detectable by 12 h postmortem in ovine longissimus.

Postmortem changes in osmotic pressure; ionic strength; pH; temperature; mu- and m-calpain; calpastatin; desmin degradation; and myofibril fragmentation index (MFI) were determined in ovine longissimus muscle. Our objectives were to characterize changes in these variables and to identify postmortem time points at which significant proteolysis and tenderization (as measured by change in MFI) could be detected. Seven crossbred (Dorset x Romanov) lambs were slaughtered, and samples of the longissimus muscle were removed at 0, 3, 6, 9, 12, 24, 72, and 360 h postmortem. Osmotic pressure increased (P < 0.05) from 379 to 528 mOsm during the postmortem storage period, with two-thirds of the increase occurring within the first 24 h. By measuring conductivity, we showed that ionic strength increased (P < 0.05) from 8.13 to 9.78 mS/cm during the storage period, which is equivalent to 79 and 97 mM NaCl solutions, respectively. In accordance with pH and temperature, conductivity reached ultimate levels at 24 h postmortem. Within 9 h postmortem, mu-calpain activity had decreased (P < 0.05) from at-death values and continued to decrease until 72 h, at which time it was undetectable. It was still possible to detect the 76-kDa isoforms (a product of the autolysis of the 80-kDa subunit of mu-calpain) immunologically, which implies that the loss of activity was not caused by extensive autolysis. In contrast, m-calpain activity remained constant throughout the aging period, whereas calpastatin activity was stable until 24 h postmortem, after which it gradually decreased. Autolysis products of mu-calpain were detected at 3 h postmortem, indicating that mu-calpain was activated some time between 0 and 3 h postmortem. Moreover, the effect of mu-calpain activity on myofibrillar substrates was first observed at 9 h postmortem, when a 23% loss of native desmin was detected. This degradation translated into an increase in MFI at 12 h. Collectively, these results imply that mu-calpain is active in postmortem muscle in the presence of calpastatin, and that effects of mu-calpain activity as determined by increased MFI are detectable during the first 12 h postmortem.

Animals↗

PubMed2003

On-line prediction of yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score using the MARC beef carcass image analysis system.

The present experiment was conducted to evaluate the ability of the U.S. Meat Animal Research Center's beef carcass image analysis system to predict calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score under commercial beef processing conditions. In two commercial beef-processing facilities, image analysis was conducted on 800 carcasses on the beef-grading chain immediately after the conventional USDA beef quality and yield grades were applied. Carcasses were blocked by plant and observed calculated yield grade. The carcasses were then separated, with 400 carcasses assigned to a calibration data set that was used to develop regression equations, and the remaining 400 carcasses assigned to a prediction data set used to validate the regression equations. Prediction equations, which included image analysis variables and hot carcass weight, accounted for 90, 88, 90, 88, and 76% of the variation in calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score, respectively, in the prediction data set. In comparison, the official USDA yield grade as applied by online graders accounted for 73% of the variation in calculated yield grade. The technology described herein could be used by the beef industry to more accurately determine beef yield grades; however, this system does not provide an accurate enough prediction of marbling score to be used without USDA grader interaction for USDA quality grading.

Animals↗

PubMed2003

Accuracy of predicting weight and percentage of beef carcass retail product using ultrasound and live animal measures.

Five hundred thirty-four steers were evaluated over a 2-yr period to develop and validate prediction equations for estimating carcass composition from live animal ultrasound measurements and to compare these equations with those developed from carcass measurements. Within 5 d before slaughter, steers were ultrasonically measured for 12th-rib fat thickness (UFAT), longissimus area (ULMA), rump fat thickness (URPFAT), and body wall thickness (UBDWALL). Carcasses were fabricated to determine weight (KGRPRD) and percentage (PRPRD) of boneless, totally trimmed retail product. Data from steers born in Year 1 (n = 282) were used to develop prediction equations using stepwise regression. Final models using live animal variables included live weight (FWT), UFAT, ULMA, and URPFAT for KGRPRD (R2 = 0.83) and UFAT, URPFAT, ULMA, FWT, and UBDWALL for PRPRD (R2 = 0.67). Equations developed from USDA yield grade variables resulted in R2 values of 0.87 and 0.68 for KGRPRD and PRPRD, respectively. When these equations were applied to steers born in Year 2 (n = 252), correlations between values predicted from live animal models and actual carcass values were 0.92 for KGRPRD, and ranged from 0.73 to 0.76 for PRPRD. Similar correlations were found for equations developed from carcass measures (r = 0.94 for KGRPRD and 0.81 for PRPRD). Both live animal and carcass equations overestimated (P < 0.01) actual KGRPRD and PRPRD. Regression of actual values on predicted values revealed a similar fit for equations developed from live animal and carcass measures. Results indicate that composition prediction equations developed from live animal and ultrasound measurements can be useful to estimate carcass composition.

Adipose Tissue↗

PubMed2003

The relationship between ultrasound measurements and carcass fat thickness and longissimus muscle area in beef cattle.

Five hundred thirty-four steers were evaluated over a 2-yr period to determine the accuracy of ultrasonic estimates of carcass 12th-rib fat thickness (CFAT) and longissimus muscle area (CLMA). Within 5 d before slaughter, steers were ultrasonically measured for 12th-rib fat thickness (UFAT) and longissimus muscle area (ULMA) using an Aloka 500V real-time ultrasound machine equipped with a 17.2-cm, 3.5-MHz linear transducer. Overall, correlation coefficients between ultrasound and carcass fat and longissimus muscle area were 0.89 and 0.86, respectively. Correlations for UFAT with CFAT were similar between years (0.86 and 0.90), whereas the relationship between ULMA and CLMA was stronger in yr 1 (r = 0.91; n = 282) than in yr 2 (r = 0.79; n = 252). Differences between ultrasonic and carcass measurements were expressed on both an actual (FDIFF and RDIFF) and absolute (FDEV and RDEV) basis. Mean FDIFF and RDIFF indicated that ultrasound underestimated CFAT by 0.06 cm and overestimated CLMA by 0.71 cm2 across both years. Overall mean FDEV and RDEV, which are indications of the average error rate, were 0.16 cm and 3.39 cm2, respectively. Analysis of year effects revealed that FDIFF, FDEV, and RDEV were greater (P < 0.01) in magnitude in yr 1. Further analysis of FDEV indicated that leaner (CFAT < 0.51 cm) cattle were overestimated and that fatter (CFAT > 1.02 cm) cattle were underestimated with ultrasound. Similarly, steers with small CLMA (< 71.0 cm2) were overestimated, and steers with large CLMA (> 90.3 cm2) were underestimated. The thickness of CFAT had an effect (P < 0.05) on the error of UFAT and ULMA measurements, with leaner animals being more accurately evaluated for both traits. Standard errors of prediction (SEP) adjusted for bias of ultrasound measurements were 0.20 cm and 4.49 cm2 for UFAT and ULMA, respectively. Differences in SEP were observed for ULMA, but not UFAT, by year. These results indicate that ultrasound can be an accurate estimator of carcass traits in live cattle when measurements are taken by an experienced, well-trained technician, with only small differences in accuracy between years.

Adipose Tissue↗

PubMed2003

Chilling and cooking rate effects on some myofibrillar determinants of tenderness of beef.

Our objectives were to examine the effects of prerigor excision and rapid chilling vs. conventional carcass chilling of two muscles on proteolysis and tenderness during the postmortem storage, as well as the effects of fast and slow rates of cooking on myofibrillar characteristics and tenderness. The longissimus thoracis (LT) and triceps brachii (TB), long head muscles were removed 45 min after exsanguination from the left side of 12 carcasses and chilled in an ice bath to induce cold shortening (excised, rapidly chilled). At 24 h postmortem, the corresponding muscles were removed from the right side (conventionally chilled). All muscles were cut into 2.54-cm-thick steaks and assigned to one of two postmortem times (1 or 14 d), and to raw and cooking treatments. Steaks were cooked at 260 degrees C (FAST) or 93 degrees C (SLOW) in a forced-air convection oven to an internal temperature of 70 degrees C. Cooking loss, cooking time, and Warner-Bratzler shear force (WBSF) were measured on cooked steaks. Sarcomere length (SL) and the extent of proteolysis of desmin were measured on raw and cooked steaks. As expected, the excised, rapidly chilled muscles had a much more rapid (P < 0.05) temperature decline than those that were conventionally chilled. The excised, rapidly chilled treatment resulted in shorter (P < 0.05) SL, and SL was shorter (P < 0.05) in LT than in TB steaks. Raw steaks had longer (P < 0.05) SL than cooked steaks, regardless of chilling treatment. The FAST cooking resulted in shorter (P < 0.05) SL than SLOW cooking in conventionally chilled steaks, but cooking rate had no effect (P > 0.05) on SL of rapidly chilled steaks. Generally, TB steaks required longer (P < 0.05) cooking times and had higher (P < 0.05) cooking losses than LT steaks, and FAST-cooked steaks had greater (P < 0.05) cooking losses than SLOW-cooked steaks. Rapidly chilled steaks had less (P < 0.05) degradation of desmin than conventionally chilled steaks (31 vs. 41%). Aging for 14 d increased (P < 0.05) desmin degradation. Rapid chilling of muscles resulted in much higher (P < 0.05) WBSF values, whereas aging resulted in lower (P < 0.05) WBSF values. The SLOW-cooked TB steaks were more tender (P < 0.05) than FAST-cooked TB steaks and LT steaks cooked at either rate. Excised, rapidly chilled muscles underwent proteolysis, but it occurred at a slower rate during the first 24 h postmortem than it did in conventionally chilled muscles. Cooking rate did not affect tenderness of LT steaks, but SLOW cooking resulted in more tender TB steaks.

Animals↗