Biomedical subjects

T L Wheeler

Publications and source records attributed to T L Wheeler.

At least 37 records · Page 2Linked to original sources

PubMed2003

Prediction of retail product weight and percentage using ultrasound and carcass measurements in beef cattle.

Data from 534 steers representing six sire breed groups were used to develop live animal ultrasound prediction equations for weight and percentage of retail product. Steers were ultrasonically measured for 12th-rib fat thickness (UFAT), rump fat thickness (URPFAT), longissimus muscle area (ULMA), and body wall thickness (UBDWALL) within 5 d before slaughter. Carcass measurements included in USDA yield grade (YG) and quality grade calculations were obtained. Carcasses were fabricated into boneless, totally trimmed retail products. Regression equations to predict weight and percentage of retail product were developed using either live animal or carcass traits as independent variables. Most of the variation in weight of retail product was accounted for by live weight (FWT) and carcass weight with R2 values of 0.66 and 0.69, respectively. Fat measurements accounted for the largest portion of the variation in percentage of retail product when used as single predictors (R2 = 0.54, 0.44, 0.23, and 0.54 for UFAT, URPFAT, UBDWALL, and carcass fat, respectively). Final models (P < 0.10) using live animal variables included FWT, UFAT, ULMA, and URPFAT for retail product weight (R2 = 0.84) and UFAT, URPFAT, ULMA, UBDWALL, and FWT for retail product percentage (R2 = 0.61). Comparatively, equations using YG variables resulted in R2 values of 0.86 and 0.65 for weight and percentage of retail product, respectively. Results indicate that live animal equations using ultrasound measurements are similar in accuracy to carcass measurements for predicting beef carcass composition, and alternative ultrasound measurements of rump fat and body wall thickness enhance the predictive capability of live animal-based equations for retail yield.

Adipose Tissue↗

PubMed2002

Evaluation of single-nucleotide polymorphisms in CAPN1 for association with meat tenderness in cattle.

Micromolar calcium activated neutral protease (CAPN1) was evaluated as a candidate gene for a quantitative trait locus (QTL) on BTA29 affecting meat tenderness by characterization of nucleotide sequence variation in the gene. Single-nucleotide polymorphisms (SNP) were identified by sequencing all 22 exons and 19 of the 21 introns in two sires (Piedmontese x Angus located at the U.S. Meat Animal Research Center in Clay Center, NE; Jersey x Limousin located at AgResearch in New Zealand) of independent resource populations previously shown to be segregating meat tenderness QTL on BTA29. The majority of the 38 SNP were found in introns or were synonymous substitutions in the coding regions, with two exceptions. Exons 14 and 9 contained SNP that were predicted to alter the protein sequence by the substitution of isoleucine for valine in Domain III of the protein, and alanine for glycine in Domain II of the protein. The resource populations were genotyped for these two SNP in addition to six intronic polymorphisms and two silent substitutions. Analysis of genotypes and shear force values in both populations revealed a difference between paternal CAPN1 alleles in which the allele encoding isoleucine at position 530 and glycine at position 316 associated with decreased meat tenderness (increased shear force values) relative to the allele encoding valine at position 530 and alanine at position 316 (P < 0.05). The association of maternal alleles with meat tenderness phenotypes is consistent with the hypothesis of CAPN1 as the gene underlying the QTL effect in two independent resource populations and presents the possibility of using these markers for selective breeding to reduce the numbers of animals with unfavorable meat tenderness traits.

Alleles↗

PubMed2002

The efficacy of three objective systems for identifying beef cuts that can be guaranteed tender.

The objective of this study was to determine the accuracy of three objective systems (prototype BeefCam, colorimeter, and slice shear force) for identifying guaranteed tender beef. In Phase I, 308 carcasses (105 Top Choice, 101 Low Choice, and 102 Select) from two commercial plants were tested. In Phase II, 400 carcasses (200 rolled USDA Select and 200 rolled USDA Choice) from one commercial plant were tested. The three systems were evaluated based on progressive certification of the longissimus as "tender" in 10% increments (the best 10, 20, 30%, etc., certified as "tender" by each technology; 100% certification would mean no sorting for tenderness). In Phase I, the error (percentage of carcasses certified as tender that had Warner-Bratzler shear force of > or = 5 kg at 14 d postmortem) for 100% certification using all carcasses was 14.1%. All certification levels up to 80% (slice shear force) and up to 70% (colorimeter) had less error (P < 0.05) than 100% certification. Errors in all levels of certification by prototype BeefCam (13.8 to 9.7%) were not different (P > 0.05) from 100% certification. In Phase I, the error for 100% certification for USDA Select carcasses was 30.7%. For Select carcasses, all slice shear force certification levels up to 60% (0 to 14.8%) had less error (P < 0.05) than 100% certification. For Select carcasses, errors in all levels of certification by colorimeter (20.0 to 29.6%) and by BeefCam (27.5 to 31.4%) were not different (P > 0.05) from 100% certification. In Phase II, the error for 100% certification for all carcasses was 9.3%. For all levels of slice shear force certification less than 90% (for all carcasses) or less than 80% (Select carcasses), errors in tenderness certification were less than (P < 0.05) for 100% certification. In Phase II, for all carcasses or Select carcasses, colorimeter and prototype BeefCam certifications did not significantly reduce errors (P > 0.05) compared to 100% certification. Thus, the direct measure of tenderness provided by slice shear force results in more accurate identification of "tender" beef carcasses than either of the indirect technologies, prototype BeefCam, or colorimeter, particularly for USDA Select carcasses. As tested in this study, slice shear force, but not the prototype BeefCam or colorimeter systems, accurately identified "tender" beef.

Animals↗

PubMed2002

Technical note: Sampling methodology for relating sarcomere length, collagen concentration, and the extent of postmortem proteolysis to beef and pork longissimus tenderness.

The objective of this study was to determine the effect of sampling methodology on the relationship between longissimus tenderness and measures of biochemical meat traits. Sampling methodology included measurements of sarcomere length, collagen concentration, and postmortem desmin proteolysis on raw samples and measurements of these same traits on the same cooked meat used for shear force measurement. Twenty crossbred steers and 20 crossbred barrows were used for these studies. The beef longissimus thoracis were vacuum-packaged, stored at 2 degrees C until 14 d postmortem, then frozen and stored at -30 degrees C. The pork longissimus thoracis et lumborum were vacuum-packaged, stored at 2 degrees C until 7 d postmortem, then frozen and stored at -30 degrees C. Trained sensory panel tenderness rating ranged from 3.1 to 7.6 for beef and 4.1 to 7.4 for pork. The coefficient of variation was lower for sarcomere length than for all other traits. Simple correlation coefficients between measurements on raw and cooked samples were 0.58 (beef) and 0.11 (pork) for sarcomere length, 0.66 (beef) and 0.59 (pork) for collagen, and 0.74 (beef) and 0.76 (pork) for desmin degradation. Simple correlation coefficients between biochemical traits and measures of tenderness (Warner-Bratzler shear force and trained sensory tenderness rating) were higher or not different for cooked compared to raw samples. Correlation coefficients between biochemical traits and tenderness rating were 0.38 (raw) and 0.22 (cooked) for sarcomere length, -0.12 (raw) and -0.45 (cooked) for collagen, and 0.48 (raw) and 0.80 (cooked) for desmin degradation in beef longissimus and 0.14 (raw) and 0.15 (cooked) for sarcomere length, -0.38 (raw) and -0.33 (cooked) for collagen, and 0.53 (raw) and 0.67 (cooked) for desmin degradation in pork longissimus. The coefficients of determination for explaining variation in tenderness rating using sarcomere length, collagen concentration, and desmin degradation for raw and cooked samples were 0.43 and 0.73 (beef) and 0.48 and 0.57 (pork), respectively. This study indicates that measurements of biochemical traits on the same cooked meat as used for shear force determination account for more of the variation in measures of tenderness than biochemical measurements made on a separate raw sample.

Animals↗

PubMed2001

Consumer impressions of Tender Select beef.

With the recent development of technology to classify beef for tenderness, it is now possible for packers and retailers to market brands of beef known to be consistently tender. The present experiment was conducted to determine consumer impressions of Tender Select, a model beef brand comprised of cuts from tender U.S. Select carcasses. A telephone survey was conducted in metropolitan Denver, CO, to recruit consumers (n = 1,036) for this study. Consumers who met minimal limits for household income, age, and beef consumption were invited to participate in a beef shopping and usage study in a local supermarket. Point-of-purchase material was developed that described Tender Select as "the only steak guaranteed tender and lean." When shown a copy of the Tender Select concept card, 89% of participating consumers (n = 759) indicated that they would definitely or probably buy that product. Of those consumers that said they would buy the product, 35% indicated that their purchases of Tender Select would be in addition to their current fresh meat purchases. Most consumers (54.1%) indicated that if Tender Select was available at their grocery store, 1 or 2 of their next 10 purchases of beef cuts would be Tender Select. Sixty-five percent of consumers indicated that if a grocery store carried a line of beef cuts guaranteed to be tender, they would buy all of their beef at that store. Both strip loins from 104 U.S. Select beef carcasses, representing a broad range (8.7 to 43.4 kg; CV = 42%) in slice shear force (SSF) at 14 d postmortem, were used to determine the effect of SSF classification on consumer satisfaction and the correlation among trained sensory panel descriptive attribute ratings and in-home consumer ratings of beef longissimus steaks. Both trained sensory panelists and consumers rated low-SSF steaks higher than the high-SSF steaks for all traits (P < 0.001). All consumer traits (like, tenderness, juiciness, flavor like, flavor amount, and overall satisfaction) were more highly correlated with SSF and trained sensory panel tenderness ratings than with sensory panel flavor or juiciness ratings. These data show that tenderness is the primary determinant of satisfaction among consumers of U.S. Select top loin steaks and that a segment of consumers would pay a premium to purchase guaranteed-tender U.S. Select steaks.

Adult↗

PubMed2001

The effects of Piedmontese inheritance and myostatin genotype on the palatability of longissimus thoracis, gluteus medius, semimembranosus, and biceps femoris.

The objective of this study was to determine the relative contributions of Piedmontese inheritance (0, 25, 50, or 75%) and myostatin genotype (+/+, mh/+, and mh/mh) to tenderness of four major muscles. Matings were made to produce animals with 0 (+/+), 1 (mh/+), or 2 (mh/mh) inactive myostatin alleles that were known to result in normal muscling, heavy muscling, and extremely heavy muscling, respectively. Over a 4-yr period, 395 steers and heifers (14 to 17 mo of age) were humanely slaughtered and the carcasses were chilled 48 h at 0 degrees C. An eight-member trained descriptive attribute panel evaluated tenderness, ease of fragmentation, connective tissue amount, juiciness, and beef flavor intensity of longissimus thoracis (LD), gluteus medius (GM), semimembranosus (SM), and biceps femoris (BF) steaks at 14 d postmortem. Data were analyzed for the main effects of group (eight combinations of myostatin genotype and percentage Piedmontese; [+/+]/0%, [+/+]/25%, [+/+]/50%, [mh/+]/25%, [mh/+]/50%, [mh/+]/75%, [mh/mh]/50%, [mh/mh]/75%) and muscle. Muscle x group interactions were not significant (P > 0.05). Within myostatin genotypes, contrasts to test the effect of percentage Piedmontese were not significant (P > 0.05). Data were reanalyzed for the main effects of myostatin genotype and muscle. Tenderness, ease of fragmentation, and amount of connective tissue ratings were higher (P < 0.05) for the mh/+ and mh/mh genotypes relative to +/+ in all muscles. In biceps femoris, mh/mh had higher (P < 0.05) tenderness, ease of fragmentation, and amount of connective tissue ratings than the mh/+ genotype. Juiciness ratings were lower (P < 0.05) for mh/mh than for mh/+ in all muscles and were lower for mh/mh than for +/+ in all muscles except gluteus medius. Beef flavor intensity ratings were lower (P < 0.05) for mh/mh than for +/+ in all muscles. Muscle ranks for tenderness within myostatin genotype were LD > GM > SM > BF, LD > GM > SM > BF, LD > GM > BF > SM, for +/+, mh/+, and mh/mh genotypes, respectively. The effects of Piedmontese inheritance on meat tenderness were all due to myostatin genotype. Piedmontese mh/mh bulls could be used as terminal sires to produce mh/+ progeny with improved carcass value due to improved tenderness in the four muscles studied.

Animals↗

PubMed2001

Technical note: comparison of myofibril fragmentation index from fresh and frozen pork and lamb longissimus.

The myofibril fragmentation index (MFI) is strongly associated with indices of meat tenderness, such as Warner-Bratzler shear force and sensory tenderness. The MFI is normally determined on fresh muscle. It is not known whether this index can be determined on frozen muscle. The objective of this experiment was, therefore, to determine whether there is a difference between MFI values of fresh and frozen lamb and pork longissimus. To compare the effect of freezing on MFI, longissimus samples were obtained from eight lamb carcasses at 1, 3, and 15 d postmortem and longissimus samples were obtained from 12 pork carcasses at 3 d postmortem. For each sample, MFI was conducted on both fresh muscle and snap-frozen muscle (frozen in liquid nitrogen and stored 23 to 26 d at -70 degrees C). The R2 between MFI of fresh and frozen muscle was 0.94 and 0.92 for lamb and pork longissimus, respectively. The differences between fresh and frozen MFI were not significant for either species (P > 0.05). These results indicate that it is not necessary to determine MFI on fresh muscle.

Animals↗

PubMed2001

Characterization of biological types of cattle (Cycle V): carcass traits and longissimus palatability.

Carcass (n = 854) and longissimus thoracis palatability (n = 802) traits from F1 steers obtained from mating Hereford, Angus, and MARC III cows to Hereford or Angus (HA), Tuli (Tu), Boran (Bo), Brahman (Br), Piedmontese (Pm), or Belgian Blue (BB) sires were compared. Data were adjusted to constant age (444 d), carcass weight (333 kg), fat thickness (1.0 cm), fat trim percentage (21%), and marbling (Small00) end points. Results presented in this abstract are for age-constant data. Carcasses from BB- and HA-sired steers were heaviest (P < 0.05) and carcasses from Bo- and Tu-sired steers were lightest (P < 0.05). Adjusted fat thickness was greatest (P < 0.05) on carcasses from HA-sired steers and least (P < 0.05) on carcasses from BB- and Pm-sired steers. Numerical USDA yield grades were lowest (P < 0.05) for carcasses from Pm- and BB-sired steers and highest (P < 0.05) for carcasses from HA- and Br-sired steers. Marbling scores were highest (P < 0.05) for carcasses from HA- and Tu-sired steers and lowest (P < 0.05) for carcasses from Br-, BB-, and Pm-sired steers. Longissimus thoracis from carcasses of HA-, Pm-, and Tu-sired steers had the lowest (P < 0.05) 14-d postmortem Warner-Bratzler shear force values. Carcasses from HA-sired steers had longissimus thoracis with the highest (P < 0.05) tenderness ratings at 7 d postmortem. Longissimus thoracis from carcasses of Br- and Bo-sired steers had the highest (P < 0.05) Warner-Bratzler shear forces and the lowest (P < 0.05) tenderness ratings at 7 d postmortem. Adjustment of traits to various slaughter end points resulted in some changes in sire breed differences for carcass traits but had little effect on palatability traits. Carcasses from BB- and Pm-sired steers provided the most desirable combination of yield grade and longissimus palatability, but carcasses from HA-cross steers provided the most desirable combination of quality grade and longissimus palatability. Tuli, a breed shown to be heat-tolerant, had longissimus tenderness similar to that of the non-heat-tolerant breeds and more tender longissimus than the heat-tolerant breeds in this study.

Animals↗

PubMed2001

Effect of postmortem storage on mu-calpain and m-calpain in ovine skeletal muscle.

Casein zymography was used to determine the effect of postmortem storage on the proteolytic activity of mu-calpain and m-calpain in lamb longissimus. Casein zymography assays were conducted on crude muscle extracts (only one centrifugation). Six market weight crossbred lambs were slaughtered and a portion of the longissimus lumborum was removed at death (within 15 min of exsanguination) and after 3, 6, 9, 12, 24, 72, and 360 h postmortem. Muscle samples were snap-frozen in liquid nitrogen and stored at -70 degrees C. Soluble muscle proteins were extracted from muscle samples and analyzed by in-gel casein assay to measure calpain proteolytic activity. There was a gradual decline in mu-calpain activity (P < 0.05) such that after 24 and 72 h postmortem, mu-calpain had lost 42 and 95% of its activity, respectively. After 360 h postmortem, no mu-calpain activity could be detected (under the conditions used in this study). Autolysis of mu-calpain could be detected as early as 3 h postmortem. It was demonstrated that the detectable level of mu-calpain activity is a function of the amount of muscle protein electrophoresed. Hence, the activity data reported are in relative terms, rather than absolute values. Furthermore, it was demonstrated that the activity data also are a function of the assay methods used. Different methods have different lower detection limits. Of the three assays examined, 14C-labeled casein was the most sensitive, then the in-gel casein assay, and the least-sensitive method was the standard casein assay. Unlike mu-calpain, postmortem storage had no effect on m-calpain (P > 0.05). When the calcium concentration of a muscle extract was increased to the level that induces m-calpain autolysis, m-calpain was autolyzed and its autolysis was readily detected by the in-gel casein assay. Collectively, these results demonstrate that calcium concentration in postmortem muscle is only high enough to activate mu-calpain. These results support the widely believed conclusion that mu-calpain-mediated proteolysis of key myofibrillar and cytoskeletal proteins is responsible for postmortem tenderization. Hence, understanding the regulation of mu-calpain in postmortem muscle should be the focus of future studies.

Animals↗

PubMed2000

Relationship of beef longissimus tenderness classes to tenderness of gluteus medius, semimembranosus, and biceps femoris.

The objective of this study was to determine the relationship of longissimus tenderness classes to tenderness of three other major muscles. Ninety-eight crossbred steers and heifers (14 to 17 mo of age) were humanely slaughtered over 9 wk and the carcasses were chilled 48 h at 0 degrees C. At 48 h postmortem, carcasses were assigned to one of three tenderness classes (tender < or = 26 kg, intermediate = 26 to 42 kg, tough > or = 42 kg) using slice shear force from the MARC Beef Classification System (n = 20, 67, and 11, respectively). The longissimus thoracis, gluteus medius, semimembranosus, and biceps femoris were removed, aged at 2 degrees C, and frozen at -30 degrees C at 14 d postmortem. Two 2.54-cm-thick steaks were obtained from each muscle, thawed to 5 degrees C, cooked with a belt grill at 163 degrees C for 5.5 min, and served warm to an eight-member trained descriptive attribute panel. Panelists evaluated each sample for tenderness, connective tissue amount, juiciness, and beef flavor intensity on 8-point scales. The mean 2-d longissimus slice shear force values were 20.7, 34.4, and 46.3 kg, respectively, for the "tender," "intermediate," and "tough" classes. Tenderness ratings were lowest (P < 0.05) for the "tough" class and highest (P < 0.05) for the "tender" class for all muscles except the gluteus medius, for which the "tender" and "intermediate" classes were not different (P > 0.05; longissimus, 7.7, 7.1, 6.3, and 7.1; semimembranosus, 6.4, 5.8, 5.1, and 5.8; biceps femoris, 5.9, 5.4, 4.8, and 5.4; gluteus medius, 6.8, 6.5, 5.8, and 6.5 for the "tender," "intermediate," "tough," and "unsorted" classes, respectively). The magnitude of the differences in tenderness ratings between the "tender" and "intermediate" classes and between the "intermediate" and "tough" classes was similar for all muscles. The percentages of tenderness ratings greater than 5.0 (slightly tender) for the "tender" and "unsorted" classes, respectively, were as follows: longissimus, 100 and 95%; semimembranosus, 95 and 85%; gluteus medius, 100 and 94%; and biceps femoris, 95 and 81%. The simple correlations between longissimus and the other muscles for tenderness ratings were as follows: semimembranosus, 0.58; biceps femoris, 0.43; and gluteus medius, 0.68. These data indicate that early-postmortem longissimus slice shear force could be used to classify top sirloin, top round, and bottom round cuts for tenderness.

Animals↗

PubMed2000

Protein kinetics in callipyge lambs.

The objectives for this experiment were to determine the effect of the callipyge phenotype on protein kinetics. We studied callipyge and normal lambs (n = 37) at 5, 8, and 11 wk of age (n = 4 to 7/ group) to determine how protein kinetics are altered by this trait. Total protein, DNA, and RNA and calpastatin activity were measured in five skeletal muscles and in the heart, kidneys, and liver, and protein accretion rates were calculated. At 8 wk, the fractional synthesis rates of proteins in these tissues were measured in vivo using a primed, continuous 8-h infusion of [2H5]phenylalanine. Fractional rates of protein degradation were estimated by differences. At 5 wk of age, muscle weights, protein mass, protein:DNA, RNA:DNA, and calpastatin activity were higher (P < .05) for callipyge, and protein mass differences continued to increase through 11 wk. At 8 wk, fractional rates of protein synthesis and degradation were lower (P < .05) in callipyge than in normal lambs. The organs of callipyge lambs exhibited reduced growth at 11 wk. Thus, enhanced muscle growth seems to be maintained in callipyge lambs by reduced protein degradation rather than increased protein synthesis. However, we cannot exclude the possibility that the initial onset of the callipyge condition may be caused by an increase in the fractional rate of protein synthesis.

Animals↗

PubMed2000

Variation in proteolysis, sarcomere length, collagen content, and tenderness among major pork muscles.

The objectives of this experiment were to determine the extent of variation in proteolysis, sarcomere length, and collagen content among pork muscles and the association of those factors with tenderness variation among muscles at 1 d postmortem. Twenty-three white composite barrows were slaughtered and carcasses (66 kg) were chilled at 0 degrees C for 24 h. At 1 d postmortem, the longissimus lumborum, biceps femoris, semimembranosus, semitendinosus, and triceps brachii, long head were dissected from one side of each carcass and frozen. Trained sensory panelists evaluated tenderness, amount of connective tissue, juiciness, and pork flavor intensity of grilled (70 degrees C) chops on 8-point scales. Raw chops were used for total collagen content, sarcomere length, and the extent of desmin proteolysis. Tenderness ratings were highest (P < .05) for semitendinosus (7.2) and triceps brachii (7.1), followed by longissimus lumborum (6.4) and semimembranosus (5.7) and were lowest (P < .05) for biceps femorus (4.0). The simple correlations between longissimus lumborum tenderness and the tenderness of other muscles were .54 (semimembranosus), .34 (semitendinosus), .36 (triceps branchii), and .17 (biceps femorus). Total collagen was highest (P < .05) for biceps femorus (7.1 mg/g muscle), followed by triceps branchii (6.0 mg/g) and semitendinosus (5.3 mg/g), and lowest for semimembranosus (4.5 mg/g) and longissimus lumborum (4.1 mg/g). Sarcomere length was longest (P < .05) for semitendinosus (2.5 microm) and triceps branchii (2.4 microm), followed by semimembranosus (1.8 microm), longissimus lumborum (1.8 microm), and biceps femorus (1.7 microm). Proteolysis of desmin was greatest (P < .05) in longissimus lumborum (39.3%), followed by semimembranosus (21.0%) and biceps femoris (18.5%), then semitendinosus (.2%) and triceps brachii (.2%). Multiple linear regression using total collagen, sarcomere length, and proteolysis accounted for 57% of the variation in tenderness rating among all samples. Piecewise linear regression was used to account for the interaction of sarcomere length with proteolysis and collagen. This analysis accounted for 72% of the variation in tenderness rating. Variation in collagen, proteolysis, and sarcomere length and the degree of their interaction with one another determine the tenderness of individual muscles.

Animals↗

PubMed1999

Evaluation of slice shear force as an objective method of assessing beef longissimus tenderness.

Experiments were conducted to develop an optimal protocol for measurement of slice shear force (SSF) and to evaluate SSF as an objective method of assessing beef longissimus tenderness. Whereas six cylindrical, 1.27-cm-diameter cores are typically removed from each steak for Warner-Bratzler shear force (WBSF) determination, a single 1-cm-thick, 5-cm-long slice is removed from the lateral end of each longissimus steak for SSF. For either technique, samples are removed parallel to the muscle fiber orientation and sheared across the fibers. Whereas WBSF uses a V-shaped blade, SSF uses a flat blade with the same thickness (1.016 mm) and degree of bevel (half-round) on the shearing edge. In Exp. 1, longissimus steaks were acquired from 60 beef carcasses to determine the effects of belt grill cooking rate (very rapid vs. rapid) and conditions of SSF measurement (hot vs cold) on the relationship of SSF with trained sensory panel (TSP) tenderness rating. Slice shear force was more strongly correlated with TSP tenderness rating when SSF measurement was conducted immediately after cooking (r = -.74 to -.76) than when steaks were chilled (24 h, 4 degrees C) before SSF measurement (r = -.57 to -.72). When SSF measurement was conducted immediately after cooking, the relationship of SSF with TSP tenderness rating did not differ among the belt grill cooking protocols used to cook the SSF steak. In Exp. 2, longissimus steaks were acquired from 479 beef carcasses to compare the ability of SSF and WBSF of 1.27-cm-diameter cores to predict TSP tenderness ratings. Slice shear force was more strongly correlated with sensory panel tenderness rating than was WBSF (r = -.82 vs -.77). In Exp. 3, longissimus steaks were acquired from 110 beef carcasses to evaluate the repeatability (.91) of SSF over a broad range of tenderness. Slice shear force is a more rapid, more accurate, and technically less difficult technique than WBSF. Use of the SSF technique could facilitate the collection of more accurate data and should allow the detection of treatment differences with reduced numbers of observations and reduced time requirements, thereby reducing research costs.

Animals↗

PubMed1999

Trained sensory panel and consumer evaluation of the effects of gamma irradiation on palatability of vacuum-packaged frozen ground beef patties.

The objectives for this experiment were to determine the effects of gamma irradiation on 1) the palatability of vacuum-packaged frozen ground beef patties by trained sensory panel and 2) consumer evaluation of the taste of hamburgers made with those patties. Boxes (4.5 kg) of frozen (-28 degrees C) ground beef patties (113.4 g/patty, 19% fat) from a commercial supplier were irradiated at a commercial gamma irradiation facility at one of three levels (0, 3.0, or 4.5 kGy). All boxes were stored at 28 degrees C for 27 to 29 d after irradiation before evaluation by a trained descriptive attribute sensory panel and for 62 to 104 d after irradiation before consumer evaluation. The trained panel evaluated grilled patties for ground beef aroma intensity, off-aroma, and off-flavor on 4-point scales (4 = intense, none, and none; 1 = none, intense, and intense, respectively) and ground beef flavor intensity, tenderness, and juiciness on 8-point scales (8 = extremely intense, tender, or juicy; 1 = extremely bland, tough, or dry). Control patties had more intense (P<.05) ground beef aroma (3.1 vs 2.6), less off-aroma (3.3 vs 2.6), and more intense ground beef flavor (4.9 vs. 4.3) than irradiated patties. However, there were no differences (P>.05) in any sensory trait between frozen ground beef patties treated with 3.0 or 4.5 kGy of gamma irradiation. There were no differences (P>.05) among treatments for tenderness (6.3, 6.6, and 6.7) or juiciness ratings (5.7, 5.9, and 5.9), respectively, for 0, 3.0, and 4.5 kGy. The consumers evaluated taste of a hamburger that included their choice of condiments on a 10-point scale (10 = excellent; 1 = terrible). Hamburgers made with patties treated with 4.5 kGy were rated lower (P<.05) in taste than hamburgers made with either control patties or those treated with 3.0 kGy (6.5, 6.6, and 6.2, respectively, for 0, 3.0, and 4.5 kGy); however, all doses were rated at some level of "fair." These results imply that hamburgers made from ground beef patties irradiated under the conditions of this experiment would encounter little, if any, consumer acceptance problems at the 3.0 kGy dose and only slightly greater problems at the 4.5 kGy dose.

Animals↗

PubMed1999

Tenderness classification of beef: III. Effect of the interaction between end point temperature and tenderness on Warner-Bratzler shear force of beef longissimus.

The objectives of this experiment were to determine 1) whether end point temperature interacts with tenderness to affect Warner-Bratzler shear force of beef longissimus and 2) if so, what impact that interaction would have on tenderness classification. Warner-Bratzler shear force was determined on longissimus thoracis cooked to either 60, 70, or 80 degrees C after 3 and 14 d of aging from carcasses of 100 steers and heifers. Warner-Bratzler shear force values (3- and 14-d aged steaks pooled) for steaks cooked to 70 degrees C were used to create five tenderness classes. The interaction of tenderness class and end point temperature was significant (P < .05). The increase in Warner-Bratzler shear force as end point temperature increased was greater (P < .05) for less-tender longissimus than more-tender longissimus (Tenderness Class 5 = 5.1, 7.2, and 8.5 kg and Tenderness Class 1 = 2.4, 3.1, and 3.7 kg, respectively, for 60, 70, and 80 degrees C). The slopes of the regressions of Warner-Bratzler shear force of longissimus cooked to 60 or 80 degrees C against Warner-Bratzler shear force of longissimus cooked to 70 degrees C were different (P < .05), providing additional evidence for this interaction. Correlations of Warner-Bratzler shear force of longissimus cooked to 60 or 80 degrees C with Warner-Bratzler shear force of longissimus cooked to 70 degrees C were .90 and .86, respectively. One effect of the interaction of tenderness with end point temperature on tenderness classification was to increase (P < .01) the advantage in shear force of a "Tender" class of beef over "Commodity" beef as end point temperature increased (.24 vs .42 vs .60 kg at 14 d for 60, 70, and 80 degrees C, respectively). When aged 14 d and cooked to 80 degrees C, "Commodity" steaks were six times more likely (P < .01) than "Tender" steaks to have shear force values > or = 5 kg (24 vs 4%). The end point temperature used to conduct tenderness classification did not affect classification accuracy, as long as the criterion for "Tender" was adjusted accordingly. However, cooking steaks to a greater end point temperature than was used for classification may reduce classification accuracy. The beef industry could alleviate the detrimental effects on palatability of consumers cooking beef to elevated degrees of doneness by identifying and marketing "Tender" longissimus.

Animal Husbandry↗

PubMed1999

Tenderness classification of beef: IV. Effect of USDA quality grade on the palatability of "tender" beef longissimus when cooked well done.

The objective of this experiment was to determine the impact of USDA quality grade on the palatability of "tender" longissimus when cooked well done. Warner-Bratzler shear force was determined on longissimus thoracis steaks aged 3 or 14 d postmortem (cooked to 70 degrees C) from carcasses of 692 steers and heifers. Steaks from 31 carcasses with Modest or Moderate marbling scores (Top Choice) and steaks from 31 carcasses with Slight00 to Slight40 marbling scores (Low Select) were selected for this experiment from carcasses identified as "tender" (shear force < 5.0 kg at 3 d postmortem). Longissimus thoracis steaks with 3 or 14 d of postmortem aging were cooked to 80 degrees C and evaluated by a trained sensory descriptive attribute panel. Top Choice steaks had higher (P < .05) juiciness (5.8 vs 5.3) and beef flavor intensity ratings (4.9 vs 4.6) than Low Select steaks. Aging of steaks for 14, rather than 3, d postmortem improved (P < .05) beef flavor intensity rating (4.8 vs 4.7) but not (P > .05) juiciness rating (5.6 vs 5.5). The interaction (P < .05) of quality grade and aging time for tenderness rating indicated that Top Choice steaks were more tender (P < .05) with 3 d of aging than steaks from Low Select carcasses (6.3 vs 5.8), but steaks from Top Choice and Low Select carcasses had similar (P > .05) tenderness ratings after 14 d of aging (7.0 and 6.8). Compared to palatability of steaks from Low Select carcasses, the palatability of steaks from Top Choice carcasses was less affected by elevated degree of doneness in "tender" longissimus thoracis, especially when steaks were aged for only 3 d. Although differences in sensory traits between Top Choice and Low Select steaks were small, the consumers who cook beef well done may benefit from implementation of tenderness classification in conjunction with USDA quality grade.

Animals↗

PubMed1999

Tenderness classification of beef: II. Design and analysis of a system to measure beef longissimus shear force under commercial processing conditions.

The objectives of this study were to evaluate the efficacy of a system for classifying beef for tenderness based on a rapid, simple method of measuring cooked longissimus shear force. Longissimus steaks (2.54 cm thick) were trimmed free of s.c. fat and bone and rapidly cooked using a belt grill. A 1-cm-thick, 5-cm-long slice was removed from the cooked longissimus parallel with the muscle fibers for measurement of shear force. Slices were sheared with a flat, blunt-end blade using an electronic testing machine. The entire process was completed in less than 10 min. Therefore, in commercial application, this process could be completed during the 10- to 15-min period that carcasses are normally held to allow the ribeye to bloom for quality grading. In Exp. 1, the repeatability of slice shear force (SSF), as determined by evaluation of duplicate samples from 204 A-maturity carcasses, was .89. In Exp. 2, A-maturity carcasses (n = 483) were classified into three groups based on SSF (< 23, 23 to 40, and > 40 kg) at 3 d postmortem that differed (P < .001) in mean trained sensory panel tenderness ratings (7.3 +/- .04, 6.4 +/- .06, and 4.4 +/- .20) and the percentages (100, 91, and 28%) of samples rated "Slightly Tender" or higher at 14 d postmortem. Therefore, this tenderness classification system could be used to accurately segregate beef carcasses into expected tenderness groups. Further research is needed to test the feasibility and accuracy of this system under a variety of commercial processing conditions.

Animals↗

PubMed1999

Evaluation of the ovine callipyge locus: III. genotypic effects on meat quality traits.

A resource flock of 362 F2 lambs provided phenotypic and genotypic data to estimate effects of callipyge (CLPG) genotypes (NN, NC, CN, and CC) on meat quality traits. The mutant allele is represented as C, the normal allele(s) as N, and the paternal allele of a genotype is given first. Lambs of each genotype born in 1994 and 1995 were serially slaughtered in six groups at 3-wk intervals starting at 23 wk of age. Warner-Bratzler shear force and subjective evaluation of marbling were collected during both years from longissimus. Calpastatin activity was measured on longissimus from the 1994 group, and ELISA quantification of calpastatin protein was obtained from the 1995 group. Significant additive and paternal polar overdominance effects on meat quality traits were detected. This is in contrast to previous research that detected only polar overdominance effects on slaughter and carcass traits in this population. The magnitude of genotypic effects on shear force differed significantly between years; however, additive (P < .01), paternal polar overdominance (P < .001), and maternal dominance (P < .01) effects adjusted for variation in carcass weight were detected within each year. Shear force data adjusted to the mean slaughter age or carcass weight indicated that the means and variances of CN and CC genotypes were greater than values of NC and NN. Shear force values were greatest for CN and were intermediate for CC. The difference in shear force (adjusted for variation in slaughter age) between homozygous genotypes (additive effect) was supported by calpastatin activity data with 2-df F-tests of 3.66 (P < .05) and 11.84 (P < .001) at d 0 and 7 postmortem, respectively. Corresponding values for the paternal polar overdominance effects on calpastatin activity were 53.80 (P < .001) and 87.43 (P < .001). Calpastatin ELISA data (d 0, adjusted for slaughter age) exhibited a paternal polar overdominance effect exclusively with a 2-df F-test of 57.63 (P < .001). Additive and paternal polar overdominance effects on marbling adjusted for slaughter age had F-tests of 6.41 (P < .01) and 93.29 (P < .001), respectively. Consequences of increased longissimus shear force must be addressed if the advantages of CN lambs for dressing percentage and carcass composition are to be realized. Further research is needed to establish whether selection targeted at changing the background genome can mitigate the negative effects of the C allele on meat tenderness.

Animals↗