Biomedical subjects
Publications and source records attributed to T R Renner.
A system for spreading relativistic heavy ion beams into large uniform radiation fields has been developed. The charged particles passing through the system are deflected into azimuthally symmetric distributions which can then be superimposed to produce dose distributions as large as 30 cm in diameter with less than +/- 3.5% variation in uniformity.
The computer modeling program used to design beam-modulating devices for charged-particle therapy at Lawrence Berkeley Laboratory has been improved to allow a more realistic description of the beam. The original program used a single calculated Bragg peak to design the spread Bragg peak. The range of this curve was shifted so that Bragg curves of varying ranges could be superimposed. The new version of the program allows several measured Bragg curves with different ranges to be used as input, and interpolates between them to obtain the required data for the superposition calculation. The experimental configuration for measuring these input curves simulated therapy conditions. Seven beam-modulating propellers with spread Bragg-peak widths ranging from 2.2 to 14.4 cm were designed and constructed for a 215-MeV/u helium beam using this new design program. Depth-dose distributions produced by these new propellers were in good agreement with predicted distributions, and these propellers are currently being used clinically.
A new beam line for radiotherapy and radiosurgery with accelerated helium-ion beams has been set up at the Bevalac. The new treatment room has been equipped with a very precise patient positioner in order to utilize the superior dose localization properties of light-ion beams. The beam spreading and shaping system is described, the trade-offs involved in positioning the beam modifying devices are discussed, and the physical properties of the generated radiation fields are reported. The Bragg peak modulation by axial beam stacking employing a variable range shifter is explained and the control system including beam monitoring and dosimetry is presented.