Biomedical subjects

Vikas V Patel

Publications and source records attributed to Vikas V Patel.

7 recordsLinked to original sources

PubMed2006

Controlling bone morphogenetic protein diffusion and bone morphogenetic protein-stimulated bone growth using fibrin glue.

STUDY DESIGN: An in vitro and in vivo study. OBJECTIVE: To evaluate the ability of fibrin glue to limit diffusion of recombinant human bone morphogenetic protein (rhBMP)-2 and its ability to protect spinal nerves from rhBMP-2 stimulated bone growth. SUMMARY OF BACKGROUND DATA: Studies have shown bone morphogenetic protein (rhBMP-2) stimulated bone growth can encroach on the spinal canal and nerves, causing neural compression. More recently, rhBMP-2 use in the cervical spine has been associated with life-threatening swelling. Fibrin glue has been used as a biologic carrier but has not been evaluated for its ability to limit rhBMP-2. METHODS: In phase 1 of the study, rhBMP-2 soaked absorbable collagen sponges (ACS) were encapsulated in fibrin glue and immediately incubated in physiologic lactated ringers solution at 38 degrees C. Samples of solution were tested for rhBMP-2 concentration. In phase 2 of the study, rats were surgically treated with laminectomy and placement of rhBMP-2/ACS versus laminectomy and placement of fibrin glue before placement of rhBMP-2/ACS. After 8 weeks, animals were euthanized and imaged using micro-computerized tomography. RESULTS: The diffusion study showed a significant limitation in rhBMP-2 diffusion when encapsulated in fibrin glue. The laminectomy study revealed blockage of bone formation by fibrin glue and protection of the spinal canal. CONCLUSIONS: Fibrin glue can limit the diffusion of rhBMP-2, and, thus, it can be used to help protect the spinal canal and nerve roots from rhBMP-2 stimulated bone growth.

Animals↗

PubMed2006

Graft resorption with the use of bone morphogenetic protein: lessons from anterior lumbar interbody fusion using femoral ring allografts and recombinant human bone morphogenetic protein-2.

STUDY DESIGN: This is a prospective cohort study examining the results and radiographic characteristics of anterior lumbar interbody fusion (ALIF) using femoral ring allografts (FRAs) and recombinant human bone morphogenetic protein-2 (rhBMP-2). This was compared to a historical control ALIF using FRAs with autologous iliac crest bone graft (ICBG). OBJECTIVE: To determine whether the use of rhBMP-2 can enhance fusion ALIF with stand-alone FRAs. SUMMARY OF BACKGROUND DATA: ALIF is a well-accepted procedure in reconstructive spine surgery. Advances in spinal surgery have produced a multitude of anterior interbody implants. The rhBMP-2 has promoted fusion in patients undergoing ALIF with cages and threaded allograft dowels. The FRA still remains a traditional alternative for anterior support. However, as a stand-alone device, the FRA has fallen into disfavor because of high rates of pseudarthrosis. With the advent of rhBMP-2, the FRA may be more attractive because of its simplicity and remodeling potential. It is important to understand the implications when rhBMP-2 is used with such structural allografts. METHODS: A total of 36 consecutive patients who underwent ALIF with stand-alone FRAs by a single surgeon (E.G.D.) at 1 institute were included. A cohort of 9 consecutive patients who received FRAs filled with rhBMP-2 was followed prospectively. After noticing suboptimal results, the senior author terminated this method of lumbar fusion. A total of 27 prior consecutive patients who received FRAs filled with autogenous ICBG were used for comparison. Analyzing sequential radiographs, flexion-extension radiographs, and computerized tomography with multiplanar reconstructions determined nonunions. Minimum follow-up was 24 months. RESULTS: Pseudarthrosis was identified in 10 of 27 (36%) patients who underwent stand-alone ALIF with FRAs and ICBG. Nonunion rate was higher among patients who received FRAs with rhBMP-2 (i.e., 5 of 9 [56%]). Statistical significance was not established because of the early termination of the treatment group (P > 0.3). Of interest, radiographs and computerized tomography revealed early and aggressive resorption of the FRAs when used with rhBMP-2. This preceded graft fracture and even disintegration, resulting in instability and eventual nonunion. CONCLUSION: The use of rhBMP-2 did not enhance the fusion rate in stand-alone ALIF with FRAs. In fact, the trend was toward a higher nonunion rate with rhBMP-2, although this was not significant with the numbers available. This result appears to be caused by the aggressive resorptive phase of allograft incorporation, which occurs before the osteoinduction phase.

Adult↗

PubMed2006

Computed tomography assessment of the accuracy of in vivo placement of artificial discs in the lumbar spine including radiographic and clinical consequences.

STUDY DESIGN: Prospective cohort study of 52 patients who had undergone artificial lumbar disc replacement. OBJECTIVES: To evaluate the implantation accuracy of prosthesis positioning, subsequent facet joint changes and prosthesis migration, and the clinical consequences of implant position. SUMMARY OF BACKGROUND DATA: Accuracy of spinal prosthesis implantation has not been evaluated rigorously, especially with a mini-incision approach. It is unknown if the inexact placement of a mobile device in the spine has any biomechanical, radiographic, or clinical repercussions. METHODS: A total of 52 consecutive patients were treated using standard methods of disc implantation with an intervertebral prosthesis. Computed tomography scans were performed within 3 days and again at 6 to 24 months. An independent radiologist analyzed the images for prosthesis position, rotation, migration, and facet changes. Results were compared with clinical outcome, measured by the Visual Analog Scale and Oswestry Disability Index. RESULTS: Deviation of the prosthesis from the center position was under 1.2 mm, and rotation off of midline was under 12 degrees. Follow-up CT scans showed no migration or facet changes. Regression analysis showed no correlation of prosthesis position with clinical outcome. CONCLUSIONS: Current prosthetic disc implantation methods, with minimally invasive access techniques, are relatively accurate. Although there can be deviation of the prosthesis from ideal placement, no repercussions were attributable.

Adult↗

PubMed2006

Kyphoplasty reduction of osteoporotic vertebral compression fractures: correction of local kyphosis versus overall sagittal alignment.

STUDY DESIGN: A retrospective study of patients who underwent 1-3-level kyphoplasty procedures at a single institute. OBJECTIVE: To examine and compare the effects of single and multilevel kyphoplasty procedures on local versus overall sagittal alignment of the spine. SUMMARY OF BACKGROUND DATA: Cement augmentation has been a safe and effective method in the treatment of symptomatic vertebral compression fractures (VCFs). In addition to providing rapid pain relief, balloon tamp kyphoplasty has reduced acute fractures, allowed controlled cement placement under lower pressure, and resulted in improvement of deformity. The restoration of normal overall spinal sagittal alignment in the elderly patient with a VCF and kyphotic deformity has obvious benefits. Although significant correction of local kyphosis (fractured vertebra) has been reported in the literature, to our knowledge, there have been no reports on whether this leads to an improved overall sagittal alignment. METHODS: A total of 65 consecutive patients with symptomatic VCFs who underwent 1-3-level kyphoplasty procedures were included in the study. Preoperative and postoperative radiographs were analyzed to quantify local and overall spinal sagittal alignment correction. Preoperative and postoperative vertebral heights at the fractured levels were also measured and categorized into anterior, middle, or posterior vertebral heights. RESULTS: Measurements revealed that kyphoplasty reduced local kyphotic deformity at the fractured vertebra by an average of 7.3 degrees (63% of preoperative kyphosis). This result did not translate to similar correction in overall sagittal alignment. In fact, angular correction decreased to 2.4 degrees (20% of preoperative kyphosis at fractured level) when measured 1 level above and below. The angular correction further decreased to 1.5 degrees and 1.0 degrees (13% and 8% of preoperative kyphosis at fractured level), respectively, at spans of 2 and 3 levels above and below. Average height gain was highest in the middle of the vertebral body (39% increase) compared to the anterior or posterior edges (19% and 3% increases, respectively). With multilevel kyphoplasty procedures, higher angular gains were seen over more vertebrae compared to the 7.3 degrees for a single-level kyphoplasty: 7.8 degrees over 2 levels and 7.7 degrees over 3 levels for 2 and 3-level kyphoplasty procedures, respectively. Kyphoplasty was able to achieve higher angular reduction in thoracic versus lumbar fractures (8.5 vs. 6.4 degrees, P < 0.01). The angular correction was also better maintained over adjacent segments in the thoracic spine. CONCLUSION: The majority of kyphosis correction by kyphoplasty is limited to the vertebral body treated. The majority of height gained after kyphoplasty occurs in the midbody. Higher correction over longer spans of the spine can be achieved with multilevel kyphoplasty procedures, in proportion to the number of levels addressed. Notwithstanding its well-published clinical efficacy, it is unrealistic to expect a 1 or 2-level kyphoplasty to improve significantly the overall sagittal alignment after VCFs.

Aged↗

PubMed2004

A three-dimensional MRI analysis of knee kinematics.

PURPOSE: To quantify normal, in vivo tibio-femoral knee joint kinematics in multiple weight bearing positions using non-invasive, high-resolution MRI and discuss the potential of developing future kinematic methods to assess patients with abnormal joint pathologies. METHODS: Ten volunteers with clinically normal knees pushed inferiorly on the footplate of a weight bearing apparatus inside the MR scanner. The volunteers held the weight (133 N) for five scans as the knee motion was evaluated from 0 degrees to 60 degrees of flexion. Full extension was set as the zero point for all measured parameters. Using 3D reconstructions, tibia motion relative to the femur and flexion angle was measured as varus-valgus angle, axial rotation, anterior-posterior translation, and medial-lateral translation. Medial and lateral compartment tibio-femoral contact areas were examined and centroids of the contract areas were calculated. RESULTS: Tibial internal rotation averaged 4.8 degrees at 40 degrees of flexion and then decreased. Tibial valgus increased by 8 degrees at 60 degrees of flexion. Femoral roll back also increased to 18.5 mm average at 60 degrees of flexion, while the tibia translated medially 2.5 mm. Medial compartment femoro-tibial contact area started at 374 mm2 and decreased to 308 mm2 with flexion of 60 degrees, while lateral compartment contact area did not change significantly from 276 mm2. CONCLUSIONS: Results correlate with previous studies of knee kinematics while providing greater three-dimensional detail. MR imaging allows excellent non-invasive evaluation of knee joint kinematics with weight bearing. This tool may potentially be used for assessing knee kinematics in patients with knee pathology.

Biomechanical Phenomena↗

PubMed2003

Magnetic resonance imaging of patellofemoral kinematics with weight-bearing.

BACKGROUND: Previous studies of the patellofemoral joint have been limited by the use of invasive techniques, measurements under non-weight-bearing conditions, cadaveric specimens, or computerized models. It has been shown that soft tissue and bone can be accurately quantified with magnetic resonance imaging. The present study was designed to define the relationship between the patellofemoral contact area and patellofemoral kinematics in vivo. METHODS: Ten subjects with clinically normal knee joints were scanned with high-resolution magnetic resonance imaging while they pushed a constant weight (133 N) on the foot-plate of a custom-designed load-bearing apparatus. Images were obtained at five positions of flexion between -10 degrees and 60 degrees. Three-dimensional reconstructions were used to measure the patellofemoral cartilage contact area, patellar centroid, patellar medial and inferior translation, patellar medial and inferior tilt, and patellar varus-valgus rotation. All translation and area measurements were normalized on the basis of the interepicondylar distance. Random-effects models of quadratic regressions were used to evaluate the data. RESULTS: The mean contact area ranged from 126 mm(2) in extension to 560 mm(2) at 60 degrees of flexion. The patella translated inferiorly to a maximum distance of 34 mm at 60 degrees of flexion and translated medially to a maximum distance of 3.2 mm at 30 degrees of flexion before returning to nearly 0 mm at 60 degrees of flexion. The patella tilted inferiorly to a mean of nearly 35 degrees at 60 degrees of flexion and medially to a maximum of 4.2 degrees at 30 degrees of flexion. By 60 degrees of flexion, the centroid of the contact area had shifted to an inferior and posterior maximum of 20 and 10 mm, respectively. CONCLUSIONS: We found that lateral patellar subluxation and tilt occurred in these normal knees at full extension and the patella was reduced into the trochlear groove at 30 degrees of flexion. Therefore, we believe that lateral patellar tilt and subluxation observed during arthroscopy of the extended knee may not represent a pathological condition.

Adult↗

PubMedDate not supplied

An in vitro and in vivo analysis of fibrin glue use to control bone morphogenetic protein diffusion and bone morphogenetic protein-stimulated bone growth.

BACKGROUND CONTEXT: Recombinant human bone morphogenetic protein-2 (rh-BMP2) has become popular for augmenting spine fusion in the lumbar and cervical spine. Concerns exist, however, over bone morphogenetic protein (BMP)-stimulated soft-tissue swelling and bone growth stimulation in areas where bone is not desired, especially as the material "leaks" into such spaces. The most detrimental effects of such leakage might be airway compromise, while heterotopic bone formation into the spinal canal has been reported in animal and human studies. Fibrin glue has been used as a carrier of many osteoinductive materials; however, its efficacy at modulating the clinical effects of BMP are not known. The amorphous nature of fibrin glue makes it a candidate to control diffusion of BMP and possibly limit bone formation by limiting BMP diffusion to areas where such bone is not desired. PURPOSE: To evaluate the use of fibrin glue to limit BMP diffusion and BMP-stimulated bone growth. STUDY DESIGN/SETTING: This is an in vitro basic science study and an in vivo prospective randomized animal study. STUDY SAMPLE: Eighteen Lewis rats. OUTCOME MEASURES: In vitro study: Enzyme-linked immunosorbent assay measurement of rh-BMP2 concentration in saline. In vivo study: At day 60, rats were evaluated for neurologic deficits before sacrifice. Spines were harvested, and the following studies were performed: 1) manual testing for fusion and bone growth; 2) X-ray evaluation; 3) Micro-computed tomography (micro-CT) scans. METHODS: In vitro study: Collagen sponges soaked with BMP at two different concentrations were incubated in saline solution with and without encapsulation by fibrin glue. Saline BMP concentrations were measured at consecutive time points. In vivo study: A rat fusion model using rh-BMP2 for fusion has been developed and tested with resultant100% fusion in over 100 rats. Lewis rats were divided into two groups and treated as follows: I: Exposure of L4-L5 transverse processes, decortication, and placement of BMP sponge in the lateral intertransverse space. II: Exposure and decortication as above and placement of fibrin glue before BMP sponge placement. RESULTS: In vitro study: Peak rh-BMP2 concentrations in saline were 20% and 45% of the maximum possible for fibrin glue encapsulated sponges and controls, respectively, with a more gradual increase to peak concentration in samples encapsulated in fibrin glue. In vivo study: No rats exhibited any neurologic deficits. X-rays revealed at least partial bone formation in all rats. Manual testing of intertransverse fusion spines revealed 100% fusion in rats treated with BMP only, whereas rats treated with fibrin glue before placement of BMP sponges revealed only one possible fusion. Posterior-lateral bone formation was present on X-ray in both groups, and micro-CT imaging revealed bridging bone from transverse processes to the BMP-stimulated bone in the control groups. In spines treated with fibrin glue before rh-BMP2 placement, bone formation could still be seen within the soft tissues; however, bridging bone connecting to the transverse processes was either significantly decreased or not present. CONCLUSIONS: Fibrin glue can limit rh-BMP2 diffusion. Also, because it limited bone formation at the transverse processes, it can be inferred that fibrin glue can limit bone formation when used to separate areas of desired bone formation from areas where bone formation is not desired.

Animals↗