PubMed Health⌕ Search

Biomedical subjects

Zhenxin Wang

Publications and source records attributed to Zhenxin Wang.

15 recordsLinked to original sources
PubMed2007

Design of polymeric stabilizers for size-controlled synthesis of monodisperse gold nanoparticles in water.

A new methodology is described for the one-step aqueous preparation of highly monodisperse gold nanoparticles with diameters below 5 nm using thioether- and thiol-functionalized polymer ligands. The particle size and size distribution was controlled by subtle variation of the polymer structure. It was shown that poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA) were the most effective stabilizing polymers in the group studied and that relatively low molar mass ligands (approximately 2500 g/mol) gave rise to the narrowest particle size distributions. Particle uniformity and colloidal stability to changes in ionic strength and pH were strongly affected by the hydrophobicity of the ligand end group. "Multidentate" thiol-terminated ligands were produced by employing dithiols and tetrathiols as chain-transfer agents, and these ligands gave rise to particles with unprecedented control over particle size and enhanced colloidal stability. It was found throughout that dynamic light scattering (DLS) is a very useful corroboratory technique for characterization of these gold nanoparticles in addition to optical spectroscopy and TEM.

Avidin↗
PubMed2007

Microarray-based kinase inhibition assay by gold nanoparticle probes.

We report on the development of a new class of kinase microarray for the detection of kinase inhibition based on marking peptide phosphorylation/biotinylation events by attachment of gold nanoparticles followed by silver deposition for signal enhancement. The alpha-catalytic subunit of cyclic adenosine 5'-monophosphate-dependent protein kinase (PKA), and its well-known substrate, kemptide, were used for the purpose of monitoring phosphorylation and inhibition. As expected, highly selective inhibition of PKA is demonstrated with the four inhibitors: H89, HA1077, mallotoxin, and KN62. Furthermore, an inhibition assay demonstrates the ability to detect kinase inhibition as well as derive IC50 (half-maximal inhibitory concentration) plots.

Animals↗
PubMed2006

Formation of spherical nanostructures by the controlled aggregation of gold colloids.

Stable suspensions of size-uniform spherical assemblies of 5-8 nm gold colloids in toluene are readily obtained by cross linking the colloidal particles using alkanedithiols within a defined range of gold-dithiol molar ratios. The assemblies are very stable and remain suspended in toluene for several months without significant aggregation. These porous gold spheres can be further organized into hierarchically assembled relatively linear chains by the addition of ethanol.

Gold Colloid↗
PubMed2006

Kinase-catalyzed modification of gold nanoparticles: a new approach to colorimetric kinase activity screening.

Peptide-stabilized gold nanoparticles have been enzymatically biotinylated by a kinase-catalyzed reaction using biotin-ATP as a cosubstrate. Upon mixing with avidin-modified particles, solutions of biotinylated particles change color from red to blue, indicating aggregation of particles. On the basis of this reaction, we have developed a simple colorimetric test to monitor kinase inhibitor activity.

Avidin↗
PubMed2005

Spectrometric and voltammetric investigation of interaction of neutral red with calf thymus DNA: pH effect.

The interaction of neutral red (NR) with calf thymus DNA (CT DNA) was investigated by spectrometric (UV-vis, circular dichroism and fluorescence) and voltammetric techniques. It was shown that the interaction of NR with DNA depended on the values of R (R is defined as the ratio of the concentration of NR to that of CT DNA) and pH of the solution. NR intercalated into CT DNA base pairs at lower R value (R < 2.4) and following by NR aggregating along the helical surface of DNA at higher R value (R > 2.4) in pH 6.0 solution. Interestingly, we found that at lower R value, NR intercalated into CT DNA with its long axis perpendicular or parallel to the dyad axis of DNA in the solution of pH 6.0. While in pH 7.0 solution, NR bound with CT DNA through intercalation and electrostatic interactions. The electrochemical inactive complexes, NR-2CT DNA, 3NR-CT DNA, and NR-CT DNA were formed when NR interacted with nucleic acids in pH 6.0 and 7.2 solutions, respectively. The corresponding intrinsic binding constants for these complexes were obtained by UV-vis and fluorescence spectrometric methods, respectively. The CD spectra showed that the conformation of CT DNA was converted from right-handed B-DNA to left-handed Z-DNA due to the aggregating of NR along the surface of DNA in pH 6.0 solution, whereas a conversion from B-DNA to C-DNA was induced due to the interaction of DNA with NR in pH 7.2 solution. Finally, two binding modes of NR with CT DNA in aqueous with different values of pH were shown in the scheme.

Animals↗
PubMed2005

Microarray-based detection of protein binding and functionality by gold nanoparticle probes.

We report a microarray format for the detection of proteins and protein functionality (kinase activity) based on marking either specific antibody-protein binding or peptide phosphorylation events by attachment of gold nanoparticles followed by silver deposition for signal enhancement. The attachment of the gold nanoparticles is achieved by standard avidin-biotin chemistry. The detection principle is resonance light scattering. Highly selective recognition of standard proteins (proteins A and G) down to 1 pg/mL for proteins in solution and 10 fg for proteins on the microarray spots is demonstrated. Enzyme activity of the kinase (PKA) is detected with high specificity down to a limit of 1 fg for an established peptide substrate (kemptide) on the microarray spots. Kinase inhibition by the inhibitor (H89) is shown, demonstrating the potential for high-throughput screening for inhibitors.

Gold↗
PubMed2004

An evanescent-field-driven self-assembled molecular photoswitch for macrocycle coordination and release.

Two self-assembled monolayer (SAM) films containing the photoswitchable 4-pyridylazophenoxy chromophore have been deposited onto a gold-coated glass substrate. One film contains the chromophore as a single component, 1 SAM, and the other is doped with a nonphotoactive component as a 1:1 mixture, 2 SAM. The reversible photoswitching performances of 1 SAM and 2 SAM via the evanescence field using light of appropriate wavelengths have been investigated by UV spectroscopic and electrochemical monitoring. In principle, the trans-form SAMs present a coordinating surface, the "on" state, that can be switched "off" in the cis form. This has been illustrated by immersing both the as-deposited (trans form) SAMs and the photoswitched (predominantly cis form) SAMs into solutions of cobalt and zinc tetraphenylporphyrin (CoTPP and ZnTPP, respectively) and an octaoctyl-substituted cobalt phthalocyanine. In a further phase of this study, the remote control of binding events at the surface of the SAMs has been demonstrated through evanescent-field-driven photoswitching of trans-form SAMs coordinated at the surfaces with examples of these metallomacrocycles. This photoswitching was undertaken with the constructs immersed in neat toluene, and the macrocycles were released from the surface into the solvent. The release was measured by spectroscopic monitoring of the material remaining on the constructs. The study was extended to develop an in situ release/coordination cycle. Thus, irradiation of a construct of ZnTPP bound to the surface of trans-form 2 SAM using waveguided light at 365 nm releases the macrocycle into a toluene solution of ZnTPP. Further irradiation of the SAM, now in its cis form, with waveguided 439 nm light regenerates the trans form, which recoordinates ZnTPP from the solution. The results demonstrate the potential for using waveguided light to control molecular events within and at the surfaces of SAM constructs.

Electrochemistry↗
PubMed2003

A temperature-dependent interaction of neutral red with calf thymus DNA.

Neutral red (NR) is used as a probe to study the temperature and concentration dependent interaction of a cationic dye with nucleic acid. A temperature-dependent interaction of NR with calf thymus DNA (CT DNA) has been studied by differential pulse voltammetry (DPV), UV-Visible absorption, circular dichroism (CD) and fluorescence spectroscopy. The experimental results of increasing peak current, changes in the UV-Visible absorption and fluorescence spectra of NR and decreasing the induced circular dichroism (ICD) intensity show that (i) the binding mode of NR molecules is changed from intercalating into DNA base pairs to aggregating along the DNA double helix and (ii) the orientation of NR chromophore in DNA double helix is also changed with the temperature.

Animals↗
PubMed2003

Layer-by-layer assembly of multilayer films composed of avidin and biotin-labeled antibody for immunosensing.

Protein multilayers composed of avidin and biotin-labeled antibody (bio-Ab) were prepared on gold surface by layer-by-layer assembly technology using the high specific binding constant (K(a): approximately 10(15) M(-1)) between avidin and biotin. The assembly process of the multilayer films was monitored by using real-time BIA technique based on surface plasmon resonance (SPR). The multilayer films were also characterized by electrochemical impedance spectroscopy (EIS) and reflection absorption Fourier transform infrared spectroscopy (FTIR). The results indicate that the growth of the multilayer is uniform. From response of SPR for each layer, the stoichiometry S for the interaction between avidin and bio-Ab is calculated to be 0.37 in the multilayer whereas 0.82 in the first layer. The protein mass concentration for each layer was also obtained. The schematic figure for the multilayer assembly was proposed according to the layer mass concentration and S value. The utility of the mutilayer films for immunosensing has been investigated via their subsequent interaction with hIgG. The binding ability of the multilayer increased for one to three layers of antibody, and then reach saturation after the fourth layer. These layer-by-layer constructed antibody multilayers enhance the binding ability than covalently immobilized monolayer antibody. This technology can be also used for construction of other thin films for immunosensing and biosensor.

Animals↗
PubMedDate not supplied

The peptide route to multifunctional gold nanoparticles.

Extremely stable, peptide-capped gold nanoparticles with two different biomolecular recognition motifs expressed on their surface have been prepared, and their specific and selective binding to artificial, DNA-modified target particles and to DNA and protein microarrays has been demonstrated. Stabilization and biofunctionalization has been achieved in a single preparative step starting with citrate-stabilized gold hydrosols and a derivatization cocktail of peptide-capping ligands, which carry the functionalities of choice.

Base Sequence↗