PubMed Health⌕ Search

PubMed · 10147081

Deposition patterns with Turbuhaler.

Abstract

The degree of lung deposition is an important factor in the evaluation of different inhalation flow driven dry powder inhalers. A number of studies using radioactive and non-radioactive methods have been performed with Turbuhaler to assess lung deposition under different conditions. Mean total lung deposition of terbutaline sulfate or budesonide via Turbuhaler in healthy volunteers ranged from 21-32% of the dose when a normal inhalation flow (60L/min) was used. At a low flow (30L/min) a mean 15% of the dose was deposited in the lungs, a similar value as for a well-performed inhalation via a pressurized metered dose inhaler. Regional deposition of inhaled drug can be expressed as the ratio between the amount of drug deposited in the more peripheral parts of the lung relative to the more central parts. In a comparative study, budesonide and terbutaline sulfate were given by inhalation via Turbuhaler to healthy volunteers. The ratio of peripheral to central deposition was 2.03 for terbutaline and 1.72 for budesonide. Thus, both the water-soluble terbutaline sulfate and the non-water soluble budesonide seemed to behave in the same way when inhaled via Turbuhaler. In conclusion, Turbuhaler delivers over 20% of a metered dose to the lungs when inhaled at a normal inhalation flow rate. The regional deposition pattern in the lungs was the same for terbutaline sulfate and budesonide, in spite of differences in water solubility.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

L Borgström. 1994. Deposition patterns with Turbuhaler.. https://doi.org/10.1089/jam.1994.7.suppl_1.s-49

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Physical stability enhancement of theophylline via cocrystallization.

The crystal form adopted by the respiratory drug theophylline was modified using a crystal engineering strategy in order to search for a solid material with improved physical stability. Cocrystals, also referred to as crystalline molecular complexes, were prepared with theophylline and one of several dicarboxylic acids. Four cocrystals of theophylline are reported, one each with oxalic, malonic, maleic and glutaric acids. Crystal structures were obtained for each cocrystal material, allowing an examination of the hydrogen bonding and crystal packing features. The cocrystal design scheme was partly based upon a series of recently reported cocrystals of the molecular analogue, caffeine, and comparisons in packing features are drawn between the two cocrystal series. The theophylline cocrystals were subjected to relative humidity challenges in order to assess their stability in relation to crystalline theophylline anhydrate and the equivalent caffeine cocrystals. None of the cocrystals in this study converted into a hydrated cocrystal upon storage at high relative humidity. Furthermore, the theophylline:oxalic acid cocrystal demonstrated superior humidity stability to theophylline anhydrate under the conditions examined, while the other cocrystals appeared to offer comparable stability to that of theophylline anhydrate. The results demonstrate the feasibility of pharmaceutical cocrystal design based upon the crystallization preferences of a molecular analogue, and furthermore show that avoidance of hydrate formation and improvement in physical stability is possible via pharmaceutical cocrystallization.

Bronchodilator Agents↗

The effect of carrier surface treatment on drug particle detachment from crystalline carriers in adhesive mixtures for inhalation.

In this study, the effect of lactose carrier surface treatment on drug particle detachment during inhalation has been investigated. Crystals of marketed brands of alpha lactose monohydrate brands normally exhibit a certain surface rugosity and contain natural fines and impurities on their surface, which influence the drug-to-carrier interaction in adhesive mixtures for inhalation. Submersion treatment may change these surface characteristics. Two different sieve fractions (63-90 and 250-355microm) were submerged in mixtures of ethanol and water (96 and 80% v/v, respectively). Microscopic observation and laser diffraction analysis revealed that neither the shape nor the size of the carrier particles was changed by the submersion treatment. However, the specific surface area and the amount of impurities appeared to decrease substantially after submersion, and the magnitude of the decrease was different for the different ethanol-water mixtures. The reduction in specific surface area was attributed particularly to the removal of the adhering lactose fines from the carrier surface. Mixtures with budesonide (in a wide range of carrier payloads) were prepared before and after treatment. Drug particle detachment from the various mixtures was studied with a sieve test and with a cascade impactor analysis at 30 and 60l/min. Two different types of inhalers were used, one generating lift- and drag-forces (ISF inhaler) and one generating inertial forces (test inhaler), respectively. The cascade impactor and sieve test experiments showed that an increase in carrier surface smoothness results in a reduced drug particle detachment during inhalation, which was independent of the type of inhaler used. This reduction could be attributed to the removal of the adhering lactose fines which may provide shelter for the drug particles from press-on forces during mixing.

Bronchodilator Agents↗