Volatile organic compound emissions from latex paint--Part 1. Chamber experiments and source model development.

Abstract

Latex paints are widely used in residential and commercial indoor environments. The surface areas covered by the paints in these environments are relatively large. Thus, latex paints have the potential for having a major impact on indoor air quality (IAQ). A study was undertaken to develop methods for evaluating the impact of latex paint emission on IAQ. Small chamber experiments using stainless steel and painted and unpainted gypsum board substrates were conducted to determine the emission characteristics of latex paint. The emissions from the stainless steel were relatively short lived (3 to 4 days), whereas the emissions from gypsum board lasted for over 200 days. Because gypsum board is a common substrate for latex paint, all emission models were developed for the gypsum board substrates. The data from the small chamber tests led to the development of two empirical and two mass-transfer-based source emission models. Approximately 100 to 200 days of data were required to estimate the parameters required for the empirical models. Only 8 days of data were required to estimate the parameters for the mass-transfer-based models. The final models use paint formulation and mass transfer correlations to predict the emissions of the major individual volatile organic compounds emitted by latex paint.