PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 10260620

Conventional tomography with a digital vascular imaging system.

M W Vannier·R G Jost·J Barbier·B L McClennen
View original source ↗Export metadata ↓

Abstract

Digital conventional tomography may be performed using a digital vascular imaging (DVI) system. Digital synthesis and removal of blur from multiple tomographic sections were accomplished by computer with a single motion of the source-receptor (x-ray tube-image intensifier) complex. Tomographic application of a DVI system was evaluated by phantom simulations.

Explore related subjects

Radiographic Image EnhancementTomography, X-Ray ComputedJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M W Vannier, R G Jost, J Barbier, B L McClennen. Conventional tomography with a digital vascular imaging system.. https://pubmed.ncbi.nlm.nih.gov/10260620/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2005

Performance comparison of an active matrix flat panel imager, computed radiography system, and a screen-film system at four standard radiation qualities.

Four standard radiation qualities (from RQA 3 to RQA 9) were used to compare the imaging performance of a computed radiography (CR) system (general purpose and high resolution phosphor plates of a Kodak CR 9000 system), a selenium-based direct flat panel detector (Kodak Direct View DR 9000), and a conventional screen-film system (Kodak T-MAT L/RA film with a 3M Trimax Regular screen of speed 400) in conventional radiography. Reference exposure levels were chosen according to the manufacturer's recommendations to be representative of clinical practice (exposure index of 1700 for digital systems and a film optical density of 1.4). With the exception of the RQA 3 beam quality, the exposure levels needed to produce a mean digital signal of 1700 were higher than those needed to obtain a mean film optical density of 1.4. In spite of intense developments in the field of digital detectors, screen-film systems are still very efficient detectors for most of the beam qualities used in radiology. An important outcome of this study is the behavior of the detective quantum efficiency of the digital radiography (DR) system as a function of beam energy. The practice of users to increase beam energy when switching from a screen-film system to a CR system, in order to improve the compromise between patient dose and image quality, might not be appropriate when switching from screen-film to selenium-based DR systems.

Radiographic Image Enhancement↗