Producing "self-plasticizing" ion-selective membranes.

Abstract

Polymer membranes have been explored for the analysis of ions that do not require plasticizers and with photocurable properties. This work was focused on investigating the viability of the methacrylic-acrylic copolymers as new self-plasticizing membrane matrixes for ion-selective electrodes or other ion-sensor applications. Copolymers with glass transition temperatures ranging from -20 to -44 degrees C could be prepared without added plasticizer and were found to be functional as ion-selective membranes. Both free-radical solution polymerization and photopolymerization could be used, and "self-plasticizing" behavior of copolymers was observed with a high alkylacrylate (R = C4) content. This was found to be compatible with most commercially available ionophores, and sensors for potassium, sodium, calcium and pH were fabricated entirely by photocure procedures; single-step procedures for the immobilization of benzo-15-crown-5 ionophore on these self-plasticizing copolymer matrixes were also developed. Even though the ionophore was immobilized, potentiometric studies revealed that the ionophore remained functional, and thus, these copolymers have the advantage of suffering neither leaching of ionophore nor plasticizers. All these sensors exhibited a Nernstian or near Nernstian response with selectivity comparable to plasticized PVC membranes or other plasticized and photocurable polymer membranes. The long-term response of the potassium sensor with immobilized ionophore and the sodium sensor showed little deterioration for as long as one month and three months, respectively, under continuous use.