PubMed Health⌕ Search

PubMed · 10825879

Packable composites: overview and technical considerations.

Abstract

OBJECTIVE: New composites, called packable or condensable composites, are being promoted as amalgam alternatives. The purposes of this review article are to identify these products, define new terminology associated with them, summarize the advertised properties for the materials, discuss the ideal properties for packable composites, review the properties of the major products, and critically evaluate the proposed handling procedures for these materials. REVIEW: The term packable is preferable to condensable for describing this new class of materials. All materials should be considered amalgam alternatives, not amalgam substitutes. The compositions and physical properties reported by manufacturers reveal that none of the materials represents a remarkable improvement over the properties of more traditional universal composites. The designs of Solitaire (Heraeus Kulzer), ALERT (Jeneric-Pentron), and SureFil (Dentsply/Caulk) are discussed in detail. The distinguishing characteristics of all packable compositions are less stickiness or stiffer viscosity than conventional composites, which allow them to be placed in a manner that somewhat resembles amalgam placement. CONCLUSIONS: Packable composites may allow more convenient placement in posterior sites and may offer some technique advantages over conventional composites. However, there is no evidence that their clinical properties are consistently better than those of conventional universal composites. CLINICAL SIGNIFICANCE: Packable composites may be selected as alternatives to amalgam or conventional universal composites, but they are not equal to or better than dental amalgam in all respects. Also, in most cases, mechanical properties of packable composites are not substantially better than those of most conventional universal composites.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

K F Leinfelder, S C Bayne, E J Swift. 1999. Packable composites: overview and technical considerations.. https://doi.org/10.1111/j.1708-8240.1999.tb00405.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Modified dissolved organic matter fractionation technique for natural water.

A technique to fractionate dissolved organic materials (DOMs) from low DOM water (<5mg/l) was developed by using triple columns of DAX-8 adsorption resin, one column of AG-MP-50 cationic resin, and another column of WA 10 weak anionic resin in sequence. The procedure was then applied to fractionate water samples obtained at various sampling locations throughout two surface water treatment plants (WTPs) in central New Jersey to study its effectiveness, DOM occurrence, and variation along treatment units. The treatment plants utilize different treatment methods, hence producing variability in DOM fractions suitable for examining the procedure's effectiveness. This procedure was compared with current fractionation protocols and proved to be accurate in fractionation of low DOM water.

Composite Resins↗

Measurement of the optical density of packable composites: comparison between direct and indirect digital systems.

The aim of this study was to measure the optical density of four packable composite resins with widths of 1, 2, 3 and 4 mm, by means of Digora (direct) and DentScan DentView (indirect) digital imaging systems, in order to compare both methods. Twenty acrylic plates, with the proposed thicknesses, were used, each one containing a sample of each resin. Each acrylic plate was radiographed three times, under a standardized technique. For the Digora system, an optical plate was used under each resin sample, and, for the DentScan DentView system, occlusal films were employed, totalizing 60 exposures for each system. Optical plates and films were scanned and three consecutive optical readouts were carried out, totalizing 1,440 readouts. The results were submitted to statistical analysis and revealed that the average optical density of the four resins always increased as thickness increased. Regarding the comparisons between the composite resins, in both analysis the resin with the greater optical density was Surefil followed by Prodigy Condensable, Alert and Solitaire . The correlations between the results of Digora and DentScan DentView were significant for the different thicknesses and materials. The observed tendency is that as the values obtained with the Digora system increase, so do the values obtained with DentScan DentView . While thickness increased, the values of optical density in both Digora and DentScan DentView tended to approach each other. The Digora system presented smaller amplitude between the results obtained in adjacent thicknesses.

Composite Resins↗