PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 12109551

Interdigital transducer analysis using equivalent PSpice model.

M Ljrbańczyk·Z Waltar·W Jakubik
View original source ↗Export metadata ↓

Abstract

Interdigital transducers generating surface acoustic waves have found numerous applications. The present paper deals with an equivalent model of a single interdigital transducer as well as an SAW filter complying with the PSpice programme for the analysis of electronic systems. The suggested model makes it possible to take into account such effects as interelectrode reflections, losses along the acoustic path and the electromagnetic coupling between the transducers. The obtained results of the analysis of an interdigital transducer comply with the results obtained basing on an admittance model and delta-function model. The final aim is to model an SAW oscillator.

Explore related subjects

AcousticsElectronicsTransducersJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M Ljrbańczyk, Z Waltar, W Jakubik. 2002. Interdigital transducer analysis using equivalent PSpice model.. https://doi.org/10.1016/s0041-624x(02)00265-2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2003

Sensitivity of the acoustic waveguide biosensor to protein binding as a function of the waveguide properties.

The aim of this work is to study the effect of operating frequency, piezoelectric substrate and waveguide layer thickness on the sensitivity of the acoustic waveguide sensor during the specific binding of an antibody by a protein. Shear horizontal (SH) wave devices consisting of (a) a LiTaO3 substrate operating at 104 MHz, (b) a quartz substrate operating at 108 MHz and (c) a quartz substrate operating at 155 MHz were coated with a photoresist polymer layer in order to produce acoustic waveguide devices supporting a Love wave. The effect of the thickness of the polymer layer on the Love wave was assessed by measuring the amplitude and phase of the wave before and after coating. The sensitivity of the above three biosensors was compared during the detection of the specific binding of different concentrations of Immunoglobulin G in the range of 0.7-667 nM to a protein A modified surface. Results indicate that the thickness of the polymer guiding layer is critical for obtaining the maximum sensitivity for a given geometry but a trade-off has to be made between the theoretically determined optimum thickness for waveguiding and the device insertion loss. It was also found that increasing the frequency of operation results in a further increase in the device sensitivity to protein detection.

Acoustics↗
PubMed2003

Study of the diffusion of some emulsions in the human skin by pulsed photoacoustic spectroscopy.

We previously used pulsed photoacoustic spectroscopy (PPAS) to quantify sunscreen diffusion into human skin, and suggested a methodology to evaluate the time and the depth diffusion profile. These results were obtained by the analysis of the photoacoustic maximum response signal Pmax decrease, the time delay tmax and the Fourier transform representation of the photoacoustic signal. In this study we present the results obtained for diffusion of four typical emulsions used in sunscreen compositions that show, for the first time, a particular behaviour for one of these emulsions due to a chemical reaction inside the skin during the diffusion process. This result provides a particularly interesting technique through the PPAS, to evaluate in situ the eventual chemical reactions that can occur during drug diffusion into human skin.

Acoustics↗