PubMed Health⌕ Search

PubMed · 12593939

Differentiated thermal crystallization from amorphous chenodeoxycholic acid between the ground specimens derived from the polymorphs.

Abstract

Crystallization behavior of amorphous chenodeoxycholic acid (CDCA) was studied using X-ray diffraction (XRD), infrared (IR) spectroscopy and differential scanning calorimetry (DSC). The two polymorphs of CDCA, form I (mp 166 degrees C) and form III (mp 119 degrees C), were ground with a vibrational mill. The ground samples of both crystal forms showed halo X-ray diffraction patterns. DSC curves of the amorphous samples derived from the form I and form III showed exothermic peaks due to the crystallization to the form I at 120 and 147 degrees C, respectively. When the ground form III was mixed with the ground form I, the crystallization temperature shifted to a lower temperature as the content of the ground form I increased. In the case of co-ground sample of form I and form III, the crystallization to form I crystals proceeded by two different modes. These results indicate that the physicochemical state was different among the ground samples of the form I and form III, and that the crystal nuclei played an important role on the crystallization process of the amorphous CDCA.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Toshio Oguchi, Nahomi Sasaki, Tetuya Hara, Yuichi Tozuka, Keiji Yamamoto. 2003-03-06. Differentiated thermal crystallization from amorphous chenodeoxycholic acid between the ground specimens derived from the polymorphs.. https://doi.org/10.1016/s0378-5173(02)00675-0

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Relationship between blood compatibility and water structure--comparative study between 2-methoxyethylacrylate- and 2-methoxyethylmethacrylate-based random copolymers.

We have proposed that the excellent blood compatibility of poly(2-methoxyethylacrylate (MEA)) is caused by freezing bound water contained in it on the basis of results on platelet activation (Tanaka and Mochizuki, J Biomed Mater Res A 2004; 68:684-695). To clarify the applicability of this mechanism to other indexes for blood compatibility, the relationship between complement activation and water structure was investigated by using two copolymers, poly(MEA-2-hydroxyethylmethacrylate (HEMA)) and poly(2-methoxyethylmethacrylate (MEMA)-HEMA), where HEMA content was varied from 25 to 90 mol %. ESCA analysis revealed that the surface compositions of these copolymers (dry state) agreed with the compositions determined by (1)H NMR. However, analysis by water contact angle (wet state) showed that their surfaces were quite different. The contact angle of poly(MEMA-HEMA) depended on the monomer composition, whereas the angle of poly(MEA-HEMA) was close to that of polyHEMA regardless of the monomer composition. The effect of HEMA content in the copolymers on complement activation (production of C3a) was investigated in an in vitro test. The activation by poly(MEMA-HEMA) was enhanced according to the HEMA content, while the activation by poly(MEA-HEMA) with 0-40 mol % of HEMA was weak and did not depend on the HEMA content. These properties are discussed from the viewpoints of the water structure observed by DSC and the surface structure.

Calorimetry, Differential Scanning↗

Shape dependence in the formation of condensed phases exhibited by disubstituted sucrose esters.

We report on the self-organizing properties of sucrose esters that are di-(1',6', 1',6, and 6,6')-substituted with aliphatic chains of identical or different chain lengths and levels of saturation. For the materials possessing two saturated aliphatic chains, the compounds exhibited thermotropic lamellar smectic A phases. A remarkable new phase transition was observed for the di-octadecanoyl homologue in which one smectic A phase transformed into another with a continuous change in layer spacing, but with a discontinuous change in the correlation length. The incorporation of long cis-unsaturated chains led to increased cross-sectional areas of the chains relative to the sucrose head groups and, hence, columnar phases were observed.

Calorimetry, Differential Scanning↗

Photoluminescence and conductivity of self-assembled pi-pi stacks of perylene bisimide dyes.

The self-assembly of a new, highly fluorescent perylene bisimide dye 2 into pi stacks, both in solution and condensed phase, has been studied in detail by NMR spectroscopy, vapor pressure osmometry (VPO), UV/Vis and fluorescence spectroscopy, differential scanning calorimetry (DSC), optical polarizing microscopy (OPM) and X-ray diffraction. The NMR and VPO measurements revealed the formation of extended pi-pi stacks of the dye molecules in solution. The aggregate size determined from VPO and DOSY NMR measurements agree well with that obtained from the concentration and temperature-dependent UV/Vis spectral data by employing the isodesmic model (equal K model). In the condensed state, dye 2 possesses a hexagonal columnar liquid crystalline (LC) phase as confirmed by X-ray diffraction analysis. The columnar stacking of this dye has been further explored by atomic force microscopy (AFM). Well-resolved columnar nanostructures of the compound are observed on graphite surface. A color-tunable luminescence from green to red has been observed upon aggregation which is accompanied by an increase of the fluorescence lifetime and depolarization. The observed absorption properties can be explained in terms of molecular exciton theory. The charge transport properties of dye 2 have been investigated by pulse radiolysis-time resolved microwave conductivity measurements and a 1D charge carrier mobility up to 0.42 cm(2) V(-1) s(-1) is obtained. Considering the promising self-assembly, semiconducting, and luminescence properties of this dye, it might serve as a useful functional material for nano(opto)electronics.

Calorimetry, Differential Scanning↗