PubMed Health⌕ Search

PubMed · 12741596

Microscale solid-phase extraction system for explosives.

Abstract

A simple, semi-automated, microcolumn solid-phase extraction (SPE) system is optimized for the extraction, preconcentration and HPLC analysis of seven different explosives and explosive derivatives contaminating seawater, river water and well water samples. The microcolumns were constructed from 1/16 in. O.D. PTFE tubing (1 in.=2.54 cm) packed with 0.5-1.5 mg of SPE material. LiChrolut EN or Porapak R. The extraction system consisted of two syringe pumps and several solenoid valves. Optimal detection limits were realized when the sample water flow-rate was maximally increased within the limits of the pump, 5-10 ml/min (despite exceeding the breakthrough threshold of the SPE microcolumn), and when the eluate volume collected from the column was minimized, <5 microl (despite very low recovery percentages).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Matthew Smith, Greg E Collins, Joseph Wang. 2003-04-04. Microscale solid-phase extraction system for explosives.. https://doi.org/10.1016/s0021-9673(03)00234-6

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Overexpression of dopa decarboxylase in peritoneal dissemination of gastric cancer and its potential as a novel marker for the detection of peritoneal micrometastases with real-time RT-PCR.

We previously performed a global analysis of the gene expression of gastric cancer cell lines established from metastases to the peritoneal cavity with the cDNA microarray method, which made it possible to analyse the expression of approximately 21168 genes for the identification of novel markers for the detection of micrometastases in the peritoneal cavity. One of the upregulated genes is dopa decarboxylase (DDC), which is responsible for the synthesis of the key neurotransmitters dopamine and serotonine. We have examined its potential as a novel marker for the detection of peritoneal micrometastases of gastric cancer.DDC mRNA in the peritoneal wash from 112 gastric cancer patients was quantified for comparison of carcinoembryonic antigen (CEA) mRNA by means of real-time reverse transcriptase-polymerase chain reaction (RT-PCR) with a fluorescently labelled probe to predict peritoneal recurrence. The quantity of DDC and CEA correlated with wall penetration. Real-time RT-PCR could quantitate 10-10(6) DDC-expressing gastric cancer cells per 10(7) mesothelial cells. The cutoff value was set at the upper limit of the quantitative value for noncancer patients, and those above this cutoff value constituted the micrometastasis (MM+) group. Of 15 cases with peritoneal dissemination, 13 were MM+DDC (87% sensitivity), and one of 48 t1 cases was MM+ (98% specificity). DDC levels in peritoneal washes from patients with synchronous peritoneal metastases were more than 50 times higher than in those from patients without metastasis (P<0.01). For 15 cases of peritoneal dissemination (seven cases were cytologically positive), DDC was positive in 13 cases (87% sensitivity), but CEA failed to detect micrometastases in four cases (73% sensitivity), indicating that DDC is in some cases superior to CEA for the detection of peritoneal micrometastases of gastric cancer in terms of sensitivity as well as specificity, especially for poorly differentiated adenocarcinomas. A combination of CEA and DDC improved the accuracy of diagnosis up to 94%. These results suggest that DDC is potentially a novel marker for peritoneal dissemination of gastric cancer and that quantitative RT-PCR of DDC is reliable and efficient for the selection of patients for adjuvant intraperitoneal chemotherapy to prevent peritoneal recurrence.

Automation↗

High-throughput protein analysis integrating bioinformatics and experimental assays.

The wealth of transcript information that has been made publicly available in recent years requires the development of high-throughput functional genomics and proteomics approaches for its analysis. Such approaches need suitable data integration procedures and a high level of automation in order to gain maximum benefit from the results generated. We have designed an automatic pipeline to analyse annotated open reading frames (ORFs) stemming from full-length cDNAs produced mainly by the German cDNA Consortium. The ORFs are cloned into expression vectors for use in large-scale assays such as the determination of subcellular protein localization or kinase reaction specificity. Additionally, all identified ORFs undergo exhaustive bioinformatic analysis such as similarity searches, protein domain architecture determination and prediction of physicochemical characteristics and secondary structure, using a wide variety of bioinformatic methods in combination with the most up-to-date public databases (e.g. PRINTS, BLOCKS, INTERPRO, PROSITE SWISSPROT). Data from experimental results and from the bioinformatic analysis are integrated and stored in a relational database (MS SQL-Server), which makes it possible for researchers to find answers to biological questions easily, thereby speeding up the selection of targets for further analysis. The designed pipeline constitutes a new automatic approach to obtaining and administrating relevant biological data from high-throughput investigations of cDNAs in order to systematically identify and characterize novel genes, as well as to comprehensively describe the function of the encoded proteins.

Automation↗

Full automation of derivatization--solid-phase microextraction-gas chromatography-mass spectrometry with a dual-arm system for the determination of organometallic compounds in aqueous samples.

The determination of organometallic compounds in aqueous samples by in-vial derivatization and headspace solid-phase microextraction (SPME)-gas chromatography (GC)-mass spectrometry (MS) has been fully automated using a Twin PAL dual-arm robotic system. Linearity, accuracy, sensitivity for a series of n-methyl, n-ethyl, and n-phenyl metal substituted chloride compounds of tin, lead, and mercury were investigated. The automated method was compared to similar manual methods and improved precision, speed and throughput was achieved. By originally programming the Twin PAL dual-arm system with the supplier's software (Cycle Composer, Version 1.5.0) the arms on the robot were only able to work in sequence. However, in order to have a flexible system and exploit time efficiently the robotic arms must work simultaneously. This was accomplished by programming the robot with the new software package called Cruise Control 4-2 for Twin PALs. Compared to Cycle Composer, Cruise Control 4-2 enhanced the speed and throughput of the automated system further. In addition, with a built-in crash prevention protocol and an improved user interface a more user-friendly system was obtained.

Automation↗