PubMed Health⌕ Search

PubMed · 12906277

Nutrient removal from wastewaters using high performance materials.

Abstract

Return side streams from anaerobic digesters and dewatering facilities at wastewater treatment plants (WWTPs) contribute a significant proportion of the total nitrogen load on a mainstream process. Similarly, significant phosphate loads are also recirculated in biological nutrient removal (BNR) wastewater treatment plants. Ion exchange using a new material, known by the name MesoLite, shows strong potential for the removal of ammonia from these side streams and an opportunity to concurrently reduce phosphate levels. A pilot plant was designed and operated for several months on an ammonia rich centrate from a dewatering centrifuge at the Oxley Creek WWTP, Brisbane, Australia. The system operated with a detention time in the order of one hour and was operated for between 12 and 24 hours prior to regeneration with a sodium rich solution. The same pilot plant was used to demonstrate removal of phosphate from an abattoir wastewater stream at similar flow rates. Using MesoLite materials, >90% reduction of ammonia was achieved in the centrate side stream. A full-scale process would reduce the total nitrogen load at the Oxley Creek WWTP by at least 18%. This reduction in nitrogen load consequently improves the TKN/COD ratio of the influent and enhances the nitrogen removal performance of the biological nutrient removal process.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

I D R Mackinnon, K Barr, E Miller, S Hunter, T Pinel. 2003. Nutrient removal from wastewaters using high performance materials.. https://pubmed.ncbi.nlm.nih.gov/12906277/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Suppression of subcritical crack growth in a leucite-reinforced dental glass by ion exchange.

Glass-ceramic materials are frequently used in prosthetic dentistry because of their excellent esthetics. Problematic aspects of glass ceramics are their limited strength, the scatter in their strength data, and their time-dependent strength decrease due to subcritical crack growth effects. The short-term strength level can be significantly increased by an ion-exchange process in a potassium salt. A dual ion-exchange process in KNO3/NaNO3 can additionally improve the scatter-in-strength. The objective of the present study was to examine the effect of a single and a dual ion-exchange process on the characteristic time-dependent strength decrease of a leucite-reinforced dental glass. The parameters of subcritical crack growth were evaluated by using the constant stress rate flexural strength test. Both ion-exchange processes showed a pronounced effect on the subcritical crack growth of the glass-ceramic material. The exponential crack parameter n was increased from 25 to 52 by the single-exchange and to 107 by the dual-exchange process, respectively. We conclude that the time-dependent strength decrease of a dental glass-ceramic material can be significantly limited by the ion-exchange process. This could improve the clinical reliability of dental restorations made from this class of materials.

Aluminum Silicates↗

A novel technique for rapid extraction of volatile organohalogen compounds from low permeability media.

A new method for rapid extraction of Volatile Organic Compounds (VOC) from low permeability, unconsolidated geologic media such as clayey soil has been developed and tested using trichloroethylene (TCE) as the model compound. The technique is based on a combination of sonication and mechanical agitation of the samples. The sample vials, mounted in a special holder attached to an orbital shaker, were immersed in an ultrasonic bath during extraction. The extracts were analyzed by gas chromatography with electron capture detection (GC-ECD). The method was validated using clay samples from a TCE-contaminated industrial site by comparing TCE recoveries to those obtained by the standard methanol extraction. In all cases, the recoveries obtained with the new method were the same or better than the recoveries obtained with the reference method. The extraction time was shortened from 5 days with the standard method to less than 2 h with the new method. The new technique makes it possible to analyze a large number of samples in a short time, without the need for sample preservation and prolonged storage. It has good potential for on-site analysis to facilitate decisions while field investigations are in progress.

Aluminum Silicates↗