PubMed Health⌕ Search

PubMed · 14575949

De-icers derived from corn steep water.

Abstract

Corn steep water (CSW) and other byproducts derived from fermentations and sugar productions are presently forming the base of compositions for de-icing and anti-icing materials. Since the de-icing and anti-icing values are in part a colligative property, increase in the molar concentration of ionic species has been frequently necessary to decrease further the freezing point of this byproducts stream. In the present study this has been achieved by the generation of biodegradable organic acid salts in situ, without the use of chloride or other inorganic salts, by the alkaline degradation of reducing sugars added to corn steep water, which alone is not an efficient de-icer. Reducing sugars, such as glucose, react with alkali metal hydroxides to produce principally hydroxy carboxylic acids that react with the alkali metal hydroxide to form a mixture of organic acid salts. The ionic strength of the resulting solution is increased since each sugar molecule produces nearly two acid molecules upon degradation. The ionic strength necessary to achieve the desired freezing point depression is determined by the amount and concentration of the alkali metal hydroxide used, with the necessary counter anions being derived from the degradation of the reducing sugar. The amount of the sugar used is that required to result in a near to neutral final solution. The well-known anti-corrosive property of CSW is used in the de-icer preparations, either by conducting the alkaline degradation of the sugar in this medium, or by using water for the degradation of the sugar followed by dilution of the resulting solution with CSW to adjust the viscosity of the final solution to meet the requirements for spraying. The monovalent metal hydroxides are more efficient in producing de-icer solutions than the divalent metal hydroxides.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Byung Yun Yang, Rex Montgomery. 2003. De-icers derived from corn steep water.. https://doi.org/10.1016/s0960-8524(03)00134-2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Glucose recovery with bare and hydrogel-coated microdialysis probes: experiment and simulation of temporal effects.

In vitro microdialysis glucose sampling was used to test the transient and steady-state suitability of antifouling hydrogel coatings, composed of 2-hydroxyethyl methacrylate, vinylpyrrolidinone, and poly(ethylene glycol). The in vitro glucose diffusion coefficients of bare microdialysis membranes and hydrogel coatings were determined experimentally to be 1.1 x 10-6 and 3.2 x 10-6 cm2/s, respectively. These values were used to numerically simulate the effect of the hydrogel on glucose transport across the microdialysis membrane using a convection-diffusion transport model. The times for dialysate at the exit of the bare and hydrogel-coated microdialysis probes to reach 95% of steady state were calculated to be 20 and 66 s, respectively. However, the experimental data showed that 95% of steady-state glucose recoveries were reached after 4-5 min. Numerical simulations incorporating the Taylor dispersion in the outlet tubing showed the time difference was caused almost completely by convective transport in the outlet tubing with negligible contribution from analyte profile broadening. These data indicated that the hydrogel coatings imposed 44% reduction in glucose permeability and consequently 26% reduction in the percent recovery. The effect of hydrogel coatings on the time to reach the steady-state recovery was insignificant compared with the time required for convection of glucose in the outlet tubing.

Glucose↗

Modulation of glucose transport in skeletal muscle by reactive oxygen species.

Glucose transport is an essential physiological process that is characteristic of all eukaryotic cells, including skeletal muscle. In skeletal muscle, glucose transport is mediated by the GLUT-4 protein under conditions of increased carbohydrate utilization. The three major physiological stimuli of glucose transport in muscle are insulin, exercise/contraction, and hypoxia. Here, the role of reactive oxygen species (ROS) in modulating glucose transport in skeletal muscle is reviewed. Convincing evidence for ROS involvement in insulin- and hypoxia-mediated transport in muscle is lacking. Recent experiments, based on pharmacological and genetic approaches, support a role for ROS in contraction-mediated glucose transport. During contraction, endogenously produced ROS appear to mediate their effects on glucose transport via AMP-activated protein kinase.

Glucose↗

Glucose-specific poly(allylamine) hydrogels--a reassessment.

Polymer hydrogels synthesized by crosslinking poly(allylamine hydrochloride) with (+/-)-epichlorohydrin in the presence of d-glucose-6-phosphate monobarium salt do not show imprinting on the molecular level. A series of hydrogels was prepared using the following five templates: d-glucose-6-phosphate monobarium salt, d-glucose, l-glucose, barium hydrogen phosphate (BaHPO(4)), and d-gluconamide; a hydrogel was also prepared in the absence of a template. For all six hydrogels, batch binding studies were conducted with d-glucose, l-glucose, d-fructose, and d-gluconamide. The extent of analyte sugar binding was determined using (1)H NMR. Each hydrogel shows approximately the same relative binding affinity for the different sugar derivatives, and none displays selectivity for either glucose enantiomer. The results of the binding studies correlate with the octanol-water partition coefficients of the sugars, indicative that differential solubilities in the bulk polymer account for the binding affinities observed. Thus, in contrast to templated hydrogels prepared using methacrylate- or acrylamide-based reagents, true imprinting does not occur in this novel, crosslinked-poly(allylamine hydrochloride) system.

Glucose↗