PubMed Health⌕ Search

PubMed · 14634640

Complex and oriented ZnO nanostructures.

Abstract

Extended and oriented nanostructures are desirable for many applications, but direct fabrication of complex nanostructures with controlled crystalline morphology, orientation and surface architectures remains a significant challenge. Here we report a low-temperature, environmentally benign, solution-based approach for the preparation of complex and oriented ZnO nanostructures, and the systematic modification of their crystal morphology. Using controlled seeded growth and citrate anions that selectively adsorb on ZnO basal planes as the structure-directing agent, we prepared large arrays of oriented ZnO nanorods with controlled aspect ratios, complex film morphologies made of oriented nanocolumns and nanoplates (remarkably similar to biomineral structures in red abalone shells) and complex bilayers showing in situ column-to-rod morphological transitions. The advantages of some of these ZnO structures for photocatalytic decompositions of volatile organic compounds were demonstrated. The novel ZnO nanostructures are expected to have great potential for sensing, catalysis, optical emission, piezoelectric transduction, and actuations.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Zhengrong R Tian, James A Voigt, Jun Liu, Bonnie McKenzie, Matthew J McDermott, Mark A Rodriguez, Hiromi Konishi, Huifang Xu. 2003-11-23. Complex and oriented ZnO nanostructures.. https://doi.org/10.1038/nmat1014

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

The effects of aneurysm on the biaxial mechanical behavior of human abdominal aorta.

The biomechanical response of normal and pathologic human abdominal aortic tissue to uniaxial loading conditions is insufficient for the characterization of its three-dimensional (3D) mechanical behavior. Planar biaxial mechanical evaluation allows for 3D constitutive modeling of nearly incompressible tissues, as well as the investigation of the nature of mechanical anisotropy. In the current study, 26 abdominal aortic aneurysm (AAA) tissue samples and 8 age-matched (> 60 years of age) nonaneurysmal abdominal aortic (AA) tissue samples were obtained and tested using a tension-controlled biaxial testing protocol. Graphical response functions (Sun et al., 2003. J. Biomech. Eng. 125, 372-380) were used as a guide to describe the pseudo-elastic response of AA and AAA. Based on the observed pseudo-elastic response, a four-parameter exponential strain energy function developed by Vito (1990. J. Biomech. Eng. 112, 153-159) was used from which both an individual specimen and group material parameter sets were determined for both AA and AAA. Peak Green strain values in the circumferential (Ethetatheta,max) and longitudinal (ELL,max) directions under an equibiaxial tension of 120 N/m were also compared. The strain energy function fit all of the individual specimens well with an average R2 of 0.95 +/- 0.02 and 0.90 +/- 0.02 (mean +/- SEM) for the AA and AAA groups, respectively. The average Ethetatheta,max at 200 N/m equibiaxial tension was found to be significantly smaller for AAAs as compared to AAs (0.07 +/- 0.01 versus 0.13 +/- 0.03, respectively; p < 0.01). There was also a pronounced increase in the circumferential stiffness for AAA tissue as compared to AA tissue, indicating a larger degree of anisotropy for this tissue as compared to age-matched AA tissue. We also observed that the four-parameter Fung-elastic model was not able to fit the AAA tissue mechanical response using physically realistic material parameter values. It was concluded that aneurysmal degeneration of the abdominal aorta is associated with an increase in mechanical anisotropy, with preferential stiffening in the circumferential direction.

Anisotropy↗

A constitutive model of the posterior cruciate ligament.

Further to our previous work on the development of a general constitutive framework for transversely isotropic viscohyperelasticity (Limbert, G, Middleton, J. A transversely isotropic viscohyperelastic material. Application to the modelling of biological soft connective tissues. Int J Solids Struct 2004;41(15):4237-60.), we propose a phenomenological constitutive law to describe the anisotropic viscohyperelastic behaviour of the human posterior cruciate ligament (PCL) at high strain rates. The mechanical formulation is based on the definition of a Helmholtz free energy function containing a hyperelastic and a viscous potential. The equations are valid for arbitrary kinematics and satisfy elemental thermodynamic principles. Identification of the constitutive model with experimental data obtained from human PCL specimens was performed and showed the ability of the model to capture accurately the mechanical characteristics of the PCL at various strain rates. Influence of the isotropic and directional viscous stress responses on the global mechanical response are discussed in connection with the modelling hypotheses. This work was motivated by the need to provide an accurate constitutive model of the PCL to be used in finite element analyses of human occupants in car crash simulations. Besides uniaxial tests along the natural fibre orientation of the PCL, additional tests such as equibiaxial, strip biaxial compression-tension and shear tests were also performed in order to assess the physical response of the model in different loading situations. It was found that the model performed as well in these conditions.

Anisotropy↗

Optical recognition of surface chirality at Au(hkl) single crystalline surfaces by second harmonic generation rotational anisotropy.

Two-dimensional chirality at naturally chiral gold single crystalline surfaces was detected and characterized using optical second harmonic generation (SHG) measurements. SHG rotational anisotropy (SH-RA) patterns at Au(643)S and Au(643)R surfaces were mirror symmetric to each other. Systematic SH-RA measurements at chiral Au(hkl) surfaces with the same step and kink structures but different (111) terrace widths showed a linear correlation between surface step density and SH-RA fitting parameters arising from defects. These results indicate that SH-RA measurements provide information not only on surface chirality but also on density of surface defects.

Anisotropy↗