Microenvironment design considerations for cellular scale studies.

Glenn M Walker; Henry C Zeringue; David J Beebe

doi:10.1039/b311214d

Home/Archive/PubMed

PubMed · 15052346

Microenvironment design considerations for cellular scale studies.

Glenn M Walker·Henry C Zeringue·David J Beebe

View original source ↗Export metadata ↓

Abstract

In vivo cellular microenvironments are not well-mimicked in present in vitro cell culture systems. Microtechnology, and microfluidics in particular, provides the tools to create in vivo-like cellular microenvironments in vitro. Features of in vitro cellular microenvironments are discussed and compared to macroscale cell culture environments; the concept of an effective culture volume (ECV) is introduced to facilitate the comparison. Current research using microtechnology to investigate in vitro cellular microenvironments is presented and areas where more research is needed in characterizing the in vitro microenvironment are outlined.

Explore related subjects

Adsorption Animals Biocompatible Materials Bioreactors Cell Adhesion Cell Culture Techniques Cells, Cultured Diffusion Equipment Design Microfluidics Stress, Mechanical Journal Article Review

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Glenn M Walker, Henry C Zeringue, David J Beebe. 2004-02-10. Microenvironment design considerations for cellular scale studies.. https://doi.org/10.1039/b311214d

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption↗

PubMed2005

Sorption of Cesium on smectite-rich clays from the Bohemian Massif (Czech Republic) and their mixtures with sand.

Sorption is an important process for the transport of radionuclides through backfill materials in a radioactive waste underground repository. Within this study, sorption of Cs on selected Czech clay materials and their mixtures with sand was investigated by batch tests. The experiments were performed under oxic conditions at 25 degrees C. Synthetic groundwater as a liquid phase and unconditioned clays (as they were provided by their producer) were used to reach the natural conditions as close as possible. Distribution ratios (Rds) of Cs for all selected clays rise with increase of the clay fraction in clay/sand mixtures in agreement with previous works studying sorption behaviour of such mixtures. The rise of Rds is from 10(2) cm3 g(-1) for mixtures with 80% of sand to 10(3) cm3 g(-1) for pure clays. There are significant differences between natural and technologically modified clays.

Adsorption↗

PubMed2005

Sorption and desorption of radioselenium on calcareous soil and its solid components studied by batch and column experiments.

The effect of different calcareous soil solid components on the sorption and desorption of radioselenium was investigated by using a selective extraction method. The distribution coefficients, the breakthrough curves and the displacement curves were experimentally determined by batch and column experiments. The experiments were carried out at pH 7.8 +/- 0.2, T=20 +/- 1 degrees C and in the presence of 0.001 M CaCl2. It is found that all sorption isotherms are linear, the sorption-desorption hysteresis for untreated and treated soils to remove organic matter, CaCO3 and organic matter plus CaCO3 is obvious; and the retention of radioselenium can probably be attributed to clay and oxides. The contributions of organic matter and CaCO3 to the sorption of radioselenium are significant, and the interaction effects among organic matter, CaCO3 and other components play an important role in the sorption of radioselenium in calcareous soil. The content of interlaminary space of compacted soil plays an important role in the sorption of radioselenium in compacted soil. The presence of CaCO3 retards the transport of radioselenium in soils, CaCO3 is an important trap of radioselenium. It is very difficult for the effluent concentration to reach the influent concentration, although radioselenium is very quickly detected in the effluent solution. The breakthrough curves (BTCs) can be simulated by a one-dimensional convection-dispersion transport model.

Adsorption↗