Basic assessment of paced activation sequence mapping: implications for practical use.

Abstract

Some experiences support the use of atrial paced activation sequence mapping, but there is no systematic study assessing its spatial resolution, reproducibility, and influence of pacing parameters. The aim of this study was to evaluate these issues by using a 24-pole catheter positioned at the atrial aspect of the tricuspid and mitral annuli in 15 patients. Bipolar pacing was performed at two sites (right and left atria), 2 cycle lengths (300 and 500 ms) and two outputs (twice and tenfold the late diastolic threshold voltage for 2-ms pulses). The elapsed time between the atrial activation at the two dipoles adjacent to the pacing dipole (activation time [AT]) was measured during each pacing sequence. Changes in cycle length did not modify the AT. The increase in voltage slightly modified the AT (maximum -2 ms at the RA; 95% CI -3 to -1 ms) due to a greater shortening of the conduction time to the dipole located next to the anode. The 95% limits of the intraobserver and interobserver agreements in the AT measurement were -2 to 3 ms and -3 to 3 ms, respectively. The spatial resolution was studied in ten patients by measuring the AT during pacing from each dipole of a 20-pole catheter with a 1-3-1 mm interelectrode distance. The mean AT change was 10 +/- 4 ms per 6 mm of pacing site displacement (95% CI 8-11 ms, range 2.5-20 ms). In conclusion, paced atrial activation sequence analysis is reproducible, accurate, and relatively independent of pacing parameters.