PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 15627264

Odorant-specific requirements for arrestin function in Drosophila olfaction.

C Elaine Merrill·Tracy M Sherertz·William B Walker·L J Zwiebel
View original source ↗Export metadata ↓

Abstract

The ability to modulate olfactory sensitivity is necessary to detect chemical gradients and discriminate among a multitude of odor stimuli. Desensitization of odorant receptors has been postulated to occur when arrestins prevent the activation of downstream second messengers. A paucity of in vivo data on olfactory desensitization prompts use of Drosophila melanogaster genetics to investigate arrestins' role in regulating olfactory signaling pathways. Physiological analysis of peripheral olfactory sensitivity reveals decreased responsiveness to a host of chemically distinct odorants in flies deficient for arrestin1 (arr1), arrestin2 (arr2), or both. These phenotypes are manifest in odorant- and dose- dependent fashions. Additionally, mutants display altered adaptive properties under a prolonged exposure paradigm. Behaviorally, arr1 mutants are impaired in olfactory-based orientation towards attractive odor sources. As the olfactory deficits vary according to chemical identity and concentration, they indicate that a spectrum of arrestin activity is essential for odor processing depending upon the particular olfactory pathway involved. Arrestin mutant phenotypes are hypothesized to be a consequence of down-regulation of olfactory signaling to avoid cellular excitotoxicity. Importantly, phenotypic rescue of olfactory defects in arr1(1) mutants is achieved through transgenic expression of wild-type arr1. Taken together, these data clearly indicate that arrestins are required in a stimulus-specific manner for wild type olfactory function and add another level of complexity to peripheral odor coding mechanisms that ultimately impact olfactory behavior.

Explore related subjects

AcetatesAcetoneAnimalsAnimals, Genetically ModifiedArrestinsBehavior, AnimalButanolsDose-Response Relationship, DrugDrosophilaDrosophila ProteinsElectrophysiologyKineticsLocomotionMutationOdorantsOlfactory PathwaysOlfactory Receptor NeuronsPhosphoproteinsReceptors, OdorantSmellStimulation, ChemicalTime FactorsComparative StudyJournal ArticleResearch Support, U.S. Gov't, P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

C Elaine Merrill, Tracy M Sherertz, William B Walker, L J Zwiebel. 2005. Odorant-specific requirements for arrestin function in Drosophila olfaction.. https://doi.org/10.1002/neu.20113

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Neural network prediction of thermophilic (65 degrees C) sulfidogenic fluidized-bed reactor performance for the treatment of metal-containing wastewater.

The performance of a fluidized-bed reactor (FBR) based sulfate reducing bioprocess was predicted using artificial neural network (ANN). The FBR was operated at high (65 degrees C) temperature and it was fed with iron (40-90 mg/L) and sulfate (1,000-1,500 mg/L) containing acidic (pH = 3.5-6) synthetic wastewater. Ethanol was supplemented as carbon and electron source for sulfate reducing bacteria (SRB). The wastewater pH of 4.3-4.4 was neutralized by the alkalinity produced in acetate oxidation and the average effluent pH was 7.8 +/- 0.8. The oxidation of acetate is the rate-limiting step in the sulfidogenic ethanol oxidation by thermophilic SRB, which resulted in acetate accumulation. Sulfate reduction and acetate oxidation rates showed variation depending on the operational conditions with the maximum rates of 1 g/L/d (0.2 g/g volatile solids (VS)/d) and 0.3 g/L/d (0.06 g/g VS/d), respectively. This study presents an ANN model predicting the performance of the reactor and determining the optimal architecture of this model; such as best back-propagation (BP) algorithm and neuron numbers. The Levenberg-Marquardt algorithm was selected as the best of 12 BP algorithms and optimal neuron number was determined as 20. The developed ANN model predicted acetate (R=0.91), sulfate (R=0.95), sulfide (R=0.97), and alkalinity (R=0.94) in the FBR effluent. Hence, the ANN based model can be used to predict the FBR performance, to control the operational conditions for improved process performance.

Acetates↗
PubMed2007

Short-term temperature effects on the anaerobic metabolism of glycogen accumulating organisms.

Proliferation of glycogen accumulating organisms (GAO) has been identified as a potential cause of enhanced biological phosphorus removal (EBPR) failure in wastewater treatment plants (WWTP). GAO compete for substrate with polyphosphate accumulating organisms (PAO) that are the microorganisms responsible for the phosphorus removal process. In the present article, the effects of temperature on the anaerobic metabolism of GAO were studied in a broad temperature range (from 10 to 40 degrees C). Additionally, maximum acetate uptake rate of PAO, between 20 and 40 degrees C, was also evaluated. It was found that GAO had clear advantages over PAO for substrate uptake at temperatures higher than 20 degrees C. Below 20 degrees C, maximum acetate uptake rates of both microorganisms were similar. However, lower maintenance requirements at temperature lower than 30 degrees C give PAO metabolic advantages in the PAO-GAO competition. Consequently, PAO could be considered to be psychrophilic microorganisms while GAO appear to be mesophilic. These findings contribute to understand the observed stability of the EBPR process in WWTP operated under cold weather conditions. They may also explain the proliferation of GAO in WWTP and thus, EBPR instability, observed in hot climate regions or when treating warm industrial effluents. It is suggested to take into account the observed temperature dependencies of PAO and GAO in order to extend the applicability of current activated sludge models to a wider temperature range.

Acetates↗
PubMed2007

Long-term performance of peat biofilters treating ethyl acetate, toluene, and its mixture in air.

Three laboratory-scale peat biofilters were operated at 90 s empty bed residence time (EBRT) for over a year. Biodegradation of ethyl acetate, toluene, or a 1:1 mixture were investigated. In first stage, inlet concentration was progressively increased from 0.4 to 4.5 g/m(3). The maximum elimination capacity (EC) found for ethyl acetate was 190 gC/m(3).h, and it was not affected by toluene. The maximum EC found for toluene as a sole contaminant was 150 gC/m(3).h, but the presence of ethyl acetate decreased the toluene maximum EC to 80 gC/m(3).h. From respirometry monitoring, values of 3.19 g CO(2)/gC and 3.06 g CO(2)/gC for pure ethyl acetate and pure toluene, respectively, were found, with overall yield coefficients of 0.13 g dry biomass produced per gram ethyl acetate consumed and 0.28 g dry biomass produced per gram toluene consumed. CO(2) production in the 1:1 mixture was successfully simulated. Dynamics of living and dead cells were monitored in four sections of the biofilters. Concentrations ranged between 2.6 x 10(9) and 3.0 x 10(10) cells per gram-dry peat for total bacteria, and 2.4 x 10(9)-1.9 x 10(10) cells per gram-dry peat for living bacteria. At high loads loss of bacterial density in the inlet zones, and increase in the dead cells percentages up to 60% was observed. In second stage, long-term performance at an inlet concentration of 1.5 g/m(3) was evaluated to show the process feasibility. Good agreement with previous data was obtained in terms of EC and CO(2) production. Restoration of living cells proportion was also observed.

Acetates↗