Polymethyl methacrylate microspheres in collagen.

Eckart Haneke

doi:10.1016/j.sder.2004.08.002

Home/Archive/PubMed

PubMed · 15745230

Polymethyl methacrylate microspheres in collagen.

Eckart Haneke

View original source ↗Export metadata ↓

Abstract

Artecoll was developed about 20 years ago and underwent a number of production changes until it recently became FDA approved under the new name of Artefill. This product contains 20% polymethyl methacrylate (PMMA) microspheres with a diameter of 30 to 40 microm, which are suspended in a 3.5% atelo-collagen solution. The PMMA microspheres are now purified and no longer have an electrostatic charge, which in part was the cause for the early granulomatous reactions. Further, PMMA has long been known as bone cement and has been used in cosmetic surgery with a very good safety record. PMMA microspheres are biologically inert and nondegradable. The treatment results are therefore permanent and technical errors as well as incorrect injections will last. Due to the early record of granuloma formation, there is still a debate as to whether this product-as well as all other permanent fillers-should be injected for cosmetic reasons or not. With proper indications, excellent injection techniques, and realistic expectations as to what can be expected, this product has now proved to be one of the superior permanent filler substances.

Explore related subjects

Biocompatible Materials Cicatrix Collagen Cosmetic Techniques Face Humans Microspheres Polymethyl Methacrylate Prostheses and Implants Skin Aging Journal Article Review

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Eckart Haneke. 2004. Polymethyl methacrylate microspheres in collagen.. https://doi.org/10.1016/j.sder.2004.08.002

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Development of a 3D cell culture system for investigating cell interactions with electrospun fibers.

There are many variables to be considered in studying how cells interact with 3D scaffolds used in tissue engineering. In this study we investigated the influence of the fiber diameter and interfiber spaces of 3D electrospun fiber scaffolds on the behavior of human dermal fibroblasts. Fibers of two dissimilar model materials, polystyrene and poly-L-lactic acid, with a broad range of diameters were constructed in a specifically developed 3D cell culture system. When fibroblasts were introduced to freestanding fibers, and encouraged to "walk the plank," a minimum fiber diameter of 10 microm was observed for cell adhesion and migration, irrespective of fiber material chemistry. A distance between fibers of up to 200 microm was also observed to be the maximum gap that could be bridged by cell aggregates--a behavior not seen in conventional 2D culture. This approach has identified some basic micro-architectural parameters for electrospun scaffold design and some key differences in fibroblast growth in 3D. We suggest the findings will be of value for optimizing the integration of cells in these scaffolds for skin tissue engineering.

Biocompatible Materials↗

PubMed2007

Improved catalytic properties of immobilized lipases by the presence of very low concentrations of detergents in the reaction medium.

The addition of a very small concentration of a detergent (in many instances under the critical micellar concentration (cmc)) has been found to greatly increase the activity of immobilized lipases, using those from Pseudomonas fluorescens (PFL) and Candida antarctica (isoform B) as model enzymes. However, the detergents may also have a negative effect on enzyme activity; in fact, for all enzyme preparations and substrates the activity/detergent concentration curve reached a maximum value and started to decrease, in many instances even under the initial value. The concentration and nature of the detergent (SDS, CTAB, Triton X-100, or X-45) that permitted the maximum hyperactivation was different depending on the substrate. The best hyperactivation values promoted by the presence of detergent were over a 20-fold factor. The presence of detergents permitted the inhibition of lipases by irreversible covalent inhibitors (e.g., 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride) (AEBSF) while the enzyme, in the absence of detergent, is not inhibited by these irreversible inhibitors. This suggested that the main effect of the detergents is to shift the conformational equilibrium of lipases toward the open form. Moreover, the presence of detergents also permitted to improve the enantioselectivity exhibited by the immobilized lipases in some cases. For example, the enantioselectivity of PFL-glyoxyl agarose increased from 40 to more than 100 in the hydrolysis of (+/-)-2-hydroxy-4-phenylbutyric acid ethyl ester by using 0.1% CTAB.

Biocompatible Materials↗

PubMed2007

Development of wollastonite-poly(ethylmethacrylate co-vinylpyrrolidone) based materials for multifunctional devices.

The manufacturing of a composite made of a synthetic bioactive ceramic, pseudowollastonite (psW), and a bioresorbable copolymer ethylmethacrylate-vinylpyrrolidone (EMA/VP) is presented in this article. psW porous blocks were produced by dipping an open porous polyurethane foam in a psW containing slurry. A 40/60 wt % EMA/VP monomers mixture was poured on the blocks, and free radical polymerization initiated by azobis(isobutyronitrile) at 50 degrees C. Disks of 1 mm height were obtained by cutting the composite with a diamond saw, and bioresorption and bioactivity of the specimens were tested by immersion of the disks into SBF. A ceramic/polymer weight ratio of 72/28, greater than the usually achievable ratio by polymeric solidification of slurries of monomers charged with a powdered solid component, has been obtained. The system is bioactive and does not change the pH of the medium during the degradation test.

Biocompatible Materials↗