Fibronectin preadsorbed on hydroxyapatite together with rough surface structure increases osteoblasts' adhesion "in vitro": the theoretical usefulness of fibronectin preadsorption on hydroxyapatite to increase permanent stability and longevity in spine implants.

Despina Deligianni; Panagiotis Korovessis; Marie Christine Porte-Derrieu; Joel Amedee

Home/Archive/PubMed

PubMed · 15905771

Fibronectin preadsorbed on hydroxyapatite together with rough surface structure increases osteoblasts' adhesion "in vitro": the theoretical usefulness of fibronectin preadsorption on hydroxyapatite to increase permanent stability and longevity in spine implants.

Despina Deligianni·Panagiotis Korovessis·Marie Christine Porte-Derrieu·Joel Amedee

View original source ↗Export metadata ↓

Abstract

OBJECTIVE: The aim of this study was to investigate the contribution of fibronectin (FN) preadsorption to enhance osteoblast adhesion and strength on hydroxyapatite (HA) used either as osteoconductive bone substitute or precoating of pedicle screws and cages in spine surgery. METHODS: HA substrata with two different surface roughness values (rough HA180 and smooth HA1200) were produced, and human osteoblasts were seeded after culturing on them. Prior to osteoblast seeding, the HA substrata were immersed in FN solution. Osteoblast attachment on each of the two HA substrata was evaluated by recording the number of cells, whereas osteoblast adhesion strength was determined by measuring the shear stress required to detach the cells from the HA substrates. RESULTS: FN preadsorption increased the number of attached osteoblasts on smooth and rough HA substratum at 40% and 62%, respectively, whereas it increased osteoblast attachment strength on the smooth and rough substratum at 165% and 73%, respectively. CONCLUSIONS: This study showed that FN preadsorption and rough HA surface texture synergistically increased "in vitro" both the number and the adhesion strength of human osteoblasts. Further studies in primates and humans should be carried out to disclose the clinical relevance (increase implant's stability and longevity) of the above-mentioned observations.

Explore related subjects

Adsorption Aged Bone Screws Cell Adhesion Cells, Cultured Coated Materials, Biocompatible Durapatite Equipment Design Fibronectins Humans Internal Fixators Middle Aged Osteoblasts Spine Evaluation Study Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Despina Deligianni, Panagiotis Korovessis, Marie Christine Porte-Derrieu, Joel Amedee. 2005. Fibronectin preadsorbed on hydroxyapatite together with rough surface structure increases osteoblasts' adhesion "in vitro": the theoretical usefulness of fibronectin preadsorption on hydroxyapatite to increase permanent stability and longevity in spine implants.. https://pubmed.ncbi.nlm.nih.gov/15905771/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption↗

PubMed2007

Dual radiolabeling to study protein adsorption competition in relation with hemocompatibility.

Human fibrinogen (Fg) and albumin (HSA) were labeled with (3)H and (14)C, respectively. Dual counting allowed the adsorbed amount of the two proteins to be determined simultaneously. Single adsorption, adsorption of the two proteins in competition, but also exchange (substitution by molecules of the same nature) and displacement (desorption under the action of the other protein) experiments were performed on two model surfaces, glass and polystyrene (PS), as well as on pure polyvinylchloride (PVC-s) and on PVC from blood bag (PVC-b). As expected, the adsorbed amount of a single protein is higher on a hydrophobic compared to a hydrophilic surface. When the two proteins are adsorbed in competition, they are found in equal proportion on glass, while HSA is twice more abundant than Fg on PS and PVC-s and about six times more abundant on PVC-b. This trend is related to an increase of the water contact angle of the substrates. For PVC-b, the contact angle is affected by the presence of aliphatic components exposed at the extreme surface, as determined by angle-resolved X-ray photoelectron spectroscopy. In exchange and displacement experiments, the first adsorbed molecules remain dominating on PS while they can be removed from glass. Given the known importance of HSA and Fg adsorption for the fate of materials placed in contact with blood, the method described in this paper may be used as a first approach to orient the design of surfaces with improved hemocompatibility.

Adsorption↗

PubMed2007

Effective immobilization of subunit protein in mesoporous silica modified with ethanol.

Ethoxylated FSM-type mesoporous silica (folded-sheet mesoporous material) with a pore diameter of 6.2 nm (FSM6.2) remarkably enhances rigidly of the structure in aqueous solutions. The esterified material could be used successfully as an adsorbent to accommodate subunit protein, methemoglobin (Fe(3+)). Furthermore, methemoglobin (Fe(3+)) in the pores of ethoxy-FSM is maintained a peroxidase activity similar to the native, indicating methemoglobin retains its fore subunit structure in the pores of FSM6.2.

Adsorption↗