PubMed Health⌕ Search

PubMed · 16035062

Complement inhibition reduces material-induced leukocyte activation with PEG modified polystyrene beads (Tentagel) but not polystyrene beads.

Abstract

With isolated leukocytes, inhibiting complement reduced material-induced leukocyte activation (CD11b) with polyethylene glycol modified polystyrene beads (PS-PEG), but not with polystyrene beads (PS). The PS-PEG beads (TentaGel) were complement activating as measured by SC5b-9 levels consistent with the sensitivity of these beads to leukocyte inhibition with complement inhibitors. Following contact with PS and PS-PEG beads, isolated leukocytes in plasma and in the absence in platelets were found to significantly upregulate CD11b, while TF expression and exposure of phosphatidylserine remained at background levels. Complement inhibition by means of sCR1 partially reduced CD11b upregulation on PS-PEG beads, but had no effect with PS beads. Pyridoxal-5-phosphate (P5P) was able to significantly reduce both CD11b upregulation and exposure of phosphatidylserine with PS-PEG beads, although it did not appear to inhibit SC5b-9 production. Pentamidine and NAAGA inhibited complement and were effective in reducing CD11b upregulation with both PS and PS-PEG. However, they also had an inhibitory effect on leukocyte signaling mechanisms, precluding their utility for further study in this context. Leukocyte adhesion occurred to similar extents on both PS and PS-PEG beads. While sCR1 and P5P blocked adhesion and activation (for adherent leukocytes) on PS-PEG beads, they had no effect on leukocytes adherent to PS beads. The role of complement in leukocyte activation and adhesion was found to be material-dependent. Thus, leukocyte-material compatibility may be resolved by complement inhibition in some but not all cases. For these other materials (example here was PS), other mechanisms, such as fibrinogen adsorption and direct leukocyte release, may need exploitation to minimize leukocyte activation and adhesion.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M B Gorbet, M V Sefton. 2005-09-15. Complement inhibition reduces material-induced leukocyte activation with PEG modified polystyrene beads (Tentagel) but not polystyrene beads.. https://doi.org/10.1002/jbm.a.30354

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Development of a 3D cell culture system for investigating cell interactions with electrospun fibers.

There are many variables to be considered in studying how cells interact with 3D scaffolds used in tissue engineering. In this study we investigated the influence of the fiber diameter and interfiber spaces of 3D electrospun fiber scaffolds on the behavior of human dermal fibroblasts. Fibers of two dissimilar model materials, polystyrene and poly-L-lactic acid, with a broad range of diameters were constructed in a specifically developed 3D cell culture system. When fibroblasts were introduced to freestanding fibers, and encouraged to "walk the plank," a minimum fiber diameter of 10 microm was observed for cell adhesion and migration, irrespective of fiber material chemistry. A distance between fibers of up to 200 microm was also observed to be the maximum gap that could be bridged by cell aggregates--a behavior not seen in conventional 2D culture. This approach has identified some basic micro-architectural parameters for electrospun scaffold design and some key differences in fibroblast growth in 3D. We suggest the findings will be of value for optimizing the integration of cells in these scaffolds for skin tissue engineering.

Biocompatible Materials↗

Improved catalytic properties of immobilized lipases by the presence of very low concentrations of detergents in the reaction medium.

The addition of a very small concentration of a detergent (in many instances under the critical micellar concentration (cmc)) has been found to greatly increase the activity of immobilized lipases, using those from Pseudomonas fluorescens (PFL) and Candida antarctica (isoform B) as model enzymes. However, the detergents may also have a negative effect on enzyme activity; in fact, for all enzyme preparations and substrates the activity/detergent concentration curve reached a maximum value and started to decrease, in many instances even under the initial value. The concentration and nature of the detergent (SDS, CTAB, Triton X-100, or X-45) that permitted the maximum hyperactivation was different depending on the substrate. The best hyperactivation values promoted by the presence of detergent were over a 20-fold factor. The presence of detergents permitted the inhibition of lipases by irreversible covalent inhibitors (e.g., 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride) (AEBSF) while the enzyme, in the absence of detergent, is not inhibited by these irreversible inhibitors. This suggested that the main effect of the detergents is to shift the conformational equilibrium of lipases toward the open form. Moreover, the presence of detergents also permitted to improve the enantioselectivity exhibited by the immobilized lipases in some cases. For example, the enantioselectivity of PFL-glyoxyl agarose increased from 40 to more than 100 in the hydrolysis of (+/-)-2-hydroxy-4-phenylbutyric acid ethyl ester by using 0.1% CTAB.

Biocompatible Materials↗

Development of wollastonite-poly(ethylmethacrylate co-vinylpyrrolidone) based materials for multifunctional devices.

The manufacturing of a composite made of a synthetic bioactive ceramic, pseudowollastonite (psW), and a bioresorbable copolymer ethylmethacrylate-vinylpyrrolidone (EMA/VP) is presented in this article. psW porous blocks were produced by dipping an open porous polyurethane foam in a psW containing slurry. A 40/60 wt % EMA/VP monomers mixture was poured on the blocks, and free radical polymerization initiated by azobis(isobutyronitrile) at 50 degrees C. Disks of 1 mm height were obtained by cutting the composite with a diamond saw, and bioresorption and bioactivity of the specimens were tested by immersion of the disks into SBF. A ceramic/polymer weight ratio of 72/28, greater than the usually achievable ratio by polymeric solidification of slurries of monomers charged with a powdered solid component, has been obtained. The system is bioactive and does not change the pH of the medium during the degradation test.

Biocompatible Materials↗