PubMed Health⌕ Search

PubMed · 16186166

Development of a biologically relevant dermal sampler.

Abstract

There are currently no appropriate methods for measuring dermal exposure to volatile agents. To address this we have produced a prototype Institute of Occupational Medicine (IOM) dermal sampler consisting of an adsorbent sandwiched between a permeable membrane and an impervious backing. The concentration of solvent on the membrane surface may be estimated from the mass collected on the adsorbent and the known permeation rate through the membrane. We have developed the prototype IOM dermal sampler for measurement of toluene exposures. Evaluation of the prototype sampler was undertaken in two stages: laboratory performance in controlled exposure situations and two short-field evaluations, which included simultaneous measurement of inhalation exposure. In all cases we compared the prototype IOM dermal sampler with activated charcoal cloth (ACC). Laboratory trials were split into spray, pour and immersion tests. The data from these suggest that the sampler responds to concentration rather than the mass on the surface of the sampler. The field study showed that the prototype sampler was suitable for measuring dermal exposure. However, the mean permeation rate of the best membrane was 78 000 mug cm(-2) h(-1), which is higher than the permeation rate through skin. This high permeation rate created difficulties throughout the study, particularly as it allowed the adsorbent to become rapidly saturated. The prototype IOM dermal sampler is the first practical dermal exposure sampler to mimic uptake through the skin. The sampler gave reproducible results in the laboratory and field trials. Future work is required to identify a less permeable membrane, which has characteristics closer to that of human skin. Additionally, a higher capacity adsorbent would be desirable. We have demonstrated a major difference when calculating the total contribution to body burden via the dermal exposure pathway using the prototype IOM dermal sampler and ACC patches, 1.5% of the total body burden compared with 95%. The prototype IOM dermal sampler provides a more biologically relevant exposure metric than the alternatives.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

F E Lindsay, S Semple, A Robertson, J W Cherrie. 2005-09-26. Development of a biologically relevant dermal sampler.. https://doi.org/10.1093/annhyg%2Fmei037

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Exposure to mercury in the mine of Almaden.

OBJECTIVES: To describe the process for obtaining mercury and the historical exposure of Almadén miners to mercury. METHODS: Information on every workplace and historical data on production, technological changes in the productive process and biological and environmental values of mercury was collected. A job-exposure matrix was built with these values and the exposure to inorganic mercury was estimated quantitatively as mug/l of urine mercury. A cumulative exposure index was calculated for every worker by adding the estimates for every year in the different workplaces. RESULTS: In the mine, the highest exposures occurred during drilling, with values up to 2.26 mg/m3 in air, 2194 microg/l in urine and 374 microg/l in blood. Furnace operation and cleaning were the tasks with the highest values in metallurgy, peaking up to 3.37 mg/m3. The filling of bottles with mercury by free fall gave values within a range of 1.13-2.43 mg/m3 in air; these values dropped to 0.32-0.83 mg/m3 after introducing a new ventilation system. The toxicity effects of high doses of inorganic mercury on the central nervous and urinary systems have been known for decades. CONCLUSIONS: The exposure of the workers in Almadén mines to mercury has been very high. The extremely high content cinnabar ore of the mine explains the increased concentrations of mercury in air at the work places. This, together with inadequate working conditions, explains the high mercury levels found in blood and urine during the study period.

Air Pollutants, Occupational↗

Influence of start-up on PCDD/F emission of incinerators.

This study aims to evaluate the influence of start-up on polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) concentration in the stack flue gas of incinerators and its contributing PCDD/F emission. The PCDD/F emission of the first sample among three consecutive stack flue gas samples of five intermittent incinerators, which sampled at a stable combustion condition after start-up, is 2-3 times higher than the mean of the others. For verifying the PCDD/F characteristics of incinerators during start-up, one continuous MSWI was investigated for two years. The elevated PCDD/F emissions of the MSWI during start-up could reach 96.9 ng I-TEQN m(-3) and still maintained a high PCDD/F emission (40 times higher than the Taiwan emission limit) even 18 h after the injection of activated carbon, indicating the memory effect. Taking the MSWI for example, which consists of four incinerators, the estimated annual PCDD/F emission from normal operational conditions was 0.112 g I-TEQ. However, one start-up procedure can generate approximately 60% of the PCDD/F emissions for one whole year of normal operations. And the PCDD/F emission, which is the result of the start-ups of four incinerators, was at least two times larger than that of a whole year's normal operations, without consideration for the PCDD/F emission contributed by the long lasting memory effect.

Air Pollutants, Occupational↗