PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 16307795

Rapid localized cell trapping on biodegradable polymers using cell surface derivatization and microfluidic networking.

Jason Sinclair·Aliasger K Salem
View original source ↗Export metadata ↓

Abstract

Spatial control over cell attachment is essential for controlling cell behavior and engineering cell-based sensor arrays. Here we report on a patterning procedure that can be utilized on a wide range of adherent and non-adherent cell types without the need to identify the exact peptide sequence or extracellular matrix (ECM) necessary for optimal cell attachment. This is achieved by converting native sialic residues present on the surface of most cells into non-native aldehydes using a mild sodium periodate treatment. The aldehyde groups are then reacted with biotin hydrazide to produce biotinylated cells. Avidin is patterned onto the surface of a biotinylated biodegradable block copolymer, polylactide-poly(ethylene glycol)-biotin (PLA-PEG-biotin) by microfluidic networking using a PDMS stamp. The biotinylated cells then bind specifically to the patterned avidin regions. The PEG that is presented from the PLA-PEG-biotin copolymer in the regions without avidin immobilization minimizes cell binding in the non-patterned regions.

Explore related subjects

AvidinBiodegradation, EnvironmentalBiosensing TechniquesCell AdhesionCell MembraneDimethylpolysiloxanesFibroblastsHumansMicrofluidicsNylonsPolyestersPolyethylene GlycolsJournal ArticleResearch Support, N.I.H., ExtramuralResearch Support, Non-U.S. Gov'tResearch Support, U.S. Gov't, Non-P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jason Sinclair, Aliasger K Salem. 2005-11-22. Rapid localized cell trapping on biodegradable polymers using cell surface derivatization and microfluidic networking.. https://doi.org/10.1016/j.biomaterials.2005.10.036

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Design of polymeric stabilizers for size-controlled synthesis of monodisperse gold nanoparticles in water.

A new methodology is described for the one-step aqueous preparation of highly monodisperse gold nanoparticles with diameters below 5 nm using thioether- and thiol-functionalized polymer ligands. The particle size and size distribution was controlled by subtle variation of the polymer structure. It was shown that poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA) were the most effective stabilizing polymers in the group studied and that relatively low molar mass ligands (approximately 2500 g/mol) gave rise to the narrowest particle size distributions. Particle uniformity and colloidal stability to changes in ionic strength and pH were strongly affected by the hydrophobicity of the ligand end group. "Multidentate" thiol-terminated ligands were produced by employing dithiols and tetrathiols as chain-transfer agents, and these ligands gave rise to particles with unprecedented control over particle size and enhanced colloidal stability. It was found throughout that dynamic light scattering (DLS) is a very useful corroboratory technique for characterization of these gold nanoparticles in addition to optical spectroscopy and TEM.

Avidin↗
PubMed2007

Evaluation of the analytical performances of avidin-modified carbon sensors based on a mediated horseradish peroxidase enzyme label and their application to the amperometric detection of nucleic acids.

In this study, neutravidin-coated screen-printed carbon sensors were fully characterized and further used for the amperometric detection of specific DNA sequences of human cytomegalovirus (HCMV DNA). For this purpose, we took advantage of an earlier established relationship between the amount of HRP affinity immobilized on the surface of the electrode and the steady-state current recorded in the presence of H(2)O(2) as substrate and the single electron donor [Os(III)(bpy)(2)pyCl](2+) as cosubstrate. After incubating a saturating concentration of biotinylated horseradish peroxidase (Bio-HRP) onto the neutravidin-modified sensors, a surface concentration of active HRP of 3.6 pmol cm(-2) was calculated from the measurement of the electrocatalytic plateau current value. This result indicates that monolayers of neutravidin were adsorbed on the screen-printed carbon sensors. These neutravidin-covered platforms were then used to immobilize biotinylated nucleic acid targets. After hybridization with a complementary digoxigenin-labeled detection probe, the extent of hybrids formed was determined with an anti-digoxigenin HRP conjugate. The biosensor assay was applied to the detection of a synthetic oligonucleotide target, and then to the determination of an amplified viral DNA sequence. Monolayers of HRP-labeled oligonucleotide hybrids were immobilized onto the sensing surface whereas one third of the surface was covered with HCMV DNA hybrids. On the other hand, detection limits of 200 pM and 1 nM were obtained for the short oligonucleotide and the longer DNA targets, respectively. Finally, we demonstrated that the sensitivity of the electrochemical assay could be significantly improved by using high concentrations of the reduced form of the mediator [Os(II)(bpy)(2)pyCl](+), thus allowing one to detect as low as 30 pM of amplified HCMV DNA fragment.

Avidin↗
PubMed2007

Electrode surface confinement of self-assembled enzyme aggregates using magnetic nanoparticles and its application in bioelectrocatalysis.

Self-assembled enzyme aggregates, prepared from magnetic iron oxide nanoparticles, avidin, and a biotinylated redox enzyme, were shown particularly useful for the simple, fast, and efficient construction of highly enzyme-loaded electrodes with the help of a magnet. The approach was illustrated in the case of the bioelectrocatalytic oxidation of NADH by a diaphorase oxidoreductase in the presence of a ferrocene mediator. Two different self-assembling procedures were tested, taking advantage of the spontaneous aggregation of the nanoparticles in the presence of avidin and also of the multivalency binding of biotinylated diaphorase toward avidin. Activities of the bound and unbound diaphorase were systematically controlled allowing determination of the number of active biotinylated diaphorase per nanoparticle incorporated within each magnetic enzyme aggregate. An active enzyme loading capacity of up to 2.35 nmol mg-1 was found for the best nanostructured enzyme assembly, which is 200 times better than for commercialized magnetic micrometer-sized beads coated with streptavidin and saturated with diaphorase. With the help of a permanent magnet, the magnetic enzyme aggregates were finally magnetically collected as a film on the surface of a small screen-printed carbon electrode and the catalytic currents recorded by cyclic voltammetry. From the analysis of the steady-state catalytic current responses and the kinetic rate constants of biotinylated diaphorase, it was possible to determine the enzyme concentration within the magnetic films. Owing to the high enzyme loading in the aggregates of nanoparticles (i.e., 130 microM), the catalytic current responses were definitely higher than the ones measured at an electrode coated with a closed-packed monolayer of diaphorase or at an electrode covered with a film of magnetic micrometer-sized streptavidin beads saturated with diaphorase.

Avidin↗