PubMed · 16732227
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
D Sarll. 2006-05-27. Snow-white teeth.. https://doi.org/10.1038/sj.bdj.4813665
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
During archaeological investigation by Gifford of St Pancras Old Church burial ground, on the eastern edge of Somers Town, London, in advance of construction of the new London terminus for the Channel Tunnel Rail Link, a full porcelain denture was discovered. The high quality porcelain dentures, manufactured in the late eighteenth century French style, may have been brought with their owner, Archbishop Arthur Richard Dillon, on his journey into exile. There is evidence of prolonged use, not only for cosmetic or vocal functions but also in mastication. The dentures are unique archaeological artefacts and represent a pivotal time in dental history, with the adoption of new materials and methods of manufacture. They reflect a period of significant social and economic change for the upper echelons of French society. This paper outlines the development of porcelain dentures, discusses the prosthesis, their owner, and a possible provenance.
The aim of this study was to compare the effects of various porcelain surface-conditioning techniques, used either alone or in combination, on the shear bond strength (SBS) of ceramic brackets cured with a light emitting diode (LED). Thirty glazed porcelain facets were randomly divided into three groups of 10. In group I, the porcelain surfaces were etched with 9.6 per cent hydrofluoric acid (HFA) for 2 minutes before silane application, in group II, the porcelain surfaces were sandblasted with aluminium oxide particles, etched with 9.6 per cent HFA for 2 minutes, and silane applied, and in group III, the porcelain surfaces were sandblasted with aluminium oxide particles before silane application. Spirit ceramic brackets were bonded with a light-cured composite resin (Light Bond) and a LED. All specimens were stored in distilled water at 37 degrees C for 24 hours and thermocycled. Bond strength was determined in shear mode at a crosshead speed of 0.5 mm/minute until fracture occurred. Analysis of variance indicated a significant difference between groups (P < 0.001). The lowest SBS was found in group III (5.46 +/- 1.34, P < 0.001). No significant difference was found between group I (11.38 +/- 1.65) and group II (10.45 +/- 1.15; P > 0.05). Surface treatment with HFA and a silane coupling agent produced the highest bond strength. Sandblasting before HFA and silane application did not significantly increase bond strength. Silane application to sandblasted porcelain provided poor results in vitro and clinical trials are needed to determine its reliability for bonding ceramic brackets to ceramic crowns.
Porcelain laminate veneers (PLVs) have been used for over two decades to treat esthetic and/or functional problems, particularly in the anterior sector. A range of dental ceramic materials are presently available on the market for these treatments, though with very different characteristics in terms of the composition, optic properties and manufacturing processes involved. As a result, selection of the material best suited for the management of each individual patient may prove complicated. The present study proposes a simple system for selecting the most appropriate ceramic material, based on the two variables that most influence the esthetic outcome: the intrinsic characteristics of the substrate tooth, and the characteristics of the ceramic material in terms of resistance and optic properties.