PubMed · 17197396
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
Jeremy Shulman. 2007. Occlusal discrepancies.. https://doi.org/10.14219/jada.archive.2007.0008
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Explore the source record for details and available documents.
Because loading during chewing is not totally predictable and jaw-closing muscles are strong and act over short distances, feedback from oral receptors is important in the control of mastication. Information on such feedback can be obtained by studying reflexes in jaw muscle EMGs. This review will deal with the contribution of reflex mechanisms to modifying motor neuron activity during chewing, and the dependency of reflex sensitivity on motor task, phase of movement, and site of stimulation.
OBJECTIVE: To confirm the clinical applicability of a novel ZrSiO(4) (zircon) based shrinkage-free ceramic material, the flexural strength, fracture toughness and chemical solubility were tested. In addition, the fracture load of full crowns made from this material was tested after cyclic thermomechanical loading. METHODS: Flexural strength of 12 specimens was measured using a biaxial bending test. Fracture toughness was measured using 10 slotted box shaped specimens. The specimens were fractured using a universal testing machine; fracture loads were recorded. A chemical solubility test was performed in accordance with ISO norm 6872. Additionally, 32 ZrSiO(4) all-ceramic crowns were fabricated on extracted caries-free human molars. Sixteen Empress 2 and 16 PFM crowns served as a reference control. After artificial aging of 1.2 million cycles in the chewing simulator, the survival rate of the crowns was determined. The fracture load of all surviving specimens was obtained by loading the crowns until fracture in a universal testing machine. RESULTS: A flexural strength of 328MPa was found. The fracture toughness of the ZrSiO(4) ceramic was 5.16MPam(0.5). The chemical solubility amounted to 7.2microg/cm(2). All specimens survived the chewing simulation (survival rate: 100%); no crowns had to be re-cemented. A mean fracture strength of 1790N was found for Everest HPC for Empress 2 crowns, 1715N for Empress 2 crowns and 2416N for PFM crowns. Fracture loads of PFM crowns were significantly higher than for Empress 2 crowns (P=0.032) as well as ZrSiO(4)-crowns (P=0.007). There was no significant difference between ZrSiO(4)-crowns and Empress 2 crowns (P=0.743). SIGNIFICANCE: At the present stage, Everest HPC can be recommended for the fabrication of single crowns as an alternative to conventional PFM and other all-ceramic crowns, because its fracture strength exceeds average masticatory forces in the posterior region.