PubMed HealthSearch

PubMed · 1746341

Water diffusivity in starch-based systems.

Abstract

The objective of this study was to investigate the influence of structure, and component interactions, on the sorption and transport properties of water in starch-based systems. We compared the effective diffusivity (Deff) of water in two starches, with differing amylose-amylopectin ratios, using either kinetics of water adsorption or analysis of drying curves (water desorption) to estimate Deff. The effect of incorporating small sugar molecules into the granular or gelatinized starch matrices on Deff was measured by drying curve analysis. To investigate the possible mechanisms of water transport, the porosity and microscopic appearance of the samples at different stages of drying were determined. In a complementary study, sorption isotherms and the number of accessible "binding" sites in the starch and starch-sugar systems were determined using gravimetric analysis and inverse gas chromatography (IGC) 'probe analysis'. In the case of the starch-sugar systems, the measurements were made after the components had been 'mechanically mixed', or after more intimate mixing had been achieved by a co-freeze-drying process. The Deff of the starches was found to depend, in a complex way, on the moisture content of the samples. At relatively high moisture contents, the predominant mode of water transport was by liquid diffusion. As the samples became drier, their porosity increased, and the predominant mode of moisture transport was by vapor phase diffusion. As the samples became very dry (less than 10% water content), Deff fell significantly. Incorporation of sugars, in general, led to a reduction of Deff, which was correlated with a corresponding fall in porosity. In agreement with the findings of other workers, for the starches studied, the value of Deff determined from water adsorption measurements was significantly less than Deff determined from water desorption (drying curve analysis). The form of the Deff versus moisture content relationship was, however, independent of the method of measurement (adsorption or desorption). The water sorption and IGC probe analysis results indicated that some physicochemical interaction was expedited by the freeze-drying process. This interaction was manifested by a reduction in water sorption at a given relative vapor pressure, and by major changes in the accessibility of the co-freeze-dried samples to organic probe molecules. Taken together, the results indicate that water transport (diffusion) in starches and in starch-sugar mixtures is dependent significantly on gross structural features (development of porosity during drying), but that specific molecular, physico-chemical interactions must also be considered.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R B Leslie, P J Carillo, T Y Chung, S G Gilbert, K Hayakawa, S Marousis, G D Saravacos, M Solberg. 1991. Water diffusivity in starch-based systems.. https://doi.org/10.1007/978-1-4899-0664-9_21

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption

"Paralogs", sorbent families for protein separations.

Novel peptide-based (paralog) sorbents are evaluated with respect to performance, reproducibility and reusability in a 96-well test plate screening format, and to utility in protein separations. The results demonstrate that this approach to constructing sorbents provides a new and generally applicable set of tools for separating proteins.

Adsorption