PubMed HealthSearch

PubMed · 2360714

Regenerable fiber-optic-based immunosensor.

Abstract

An immunosensor is described that is based on fluorescently labeled F(ab') anti-human serum albumin antibody fragments covalently immobilized to the distal end of a fiber-optic probe. When human serum albumin is present, it is bound to the sensor and shields the fluorescent label from the solvent water, and a significant increase in the label fluorescence results. The sensor can be regenerated by simply immersing the sensing tip in chaotropic media. Under these conditions the antigen-antibody complex is selectively disrupted without adversely affecting the sensor. In the present configuration, the same sensor can be recycled over 50 times before the immunosurface inactivates significantly. With proper storage the sensor can last for up to 4 months.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

F V Bright, T A Betts, K S Litwiler. 1990-05-15. Regenerable fiber-optic-based immunosensor.. https://doi.org/10.1021/ac00209a019

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Effect of aging the hollow cathode by sputtering on the analytical precision of the hollow cathode discharge emission source.

Sputtering changes the analytical performance of the hollow cathode as an emission source. Proper conditioning (aging) of the hollow with sputtering greatly improves precision. Conditioning decreases the blank emission signal and changes the shape of the hollow. Micrographs which show the evolution of the bottom of the hollow into a stable bulb shape are presented. The blank emission signal decreases with aging of the hollow and approaches a constant value when the hollow is properly conditioned. A short-term stability (n = 5) of approximately 1.8% RSD has been observed frequently. An average long-term stability over several days (n = 45) of 4.5% for Li and 3.5% for Na in the emission signal from microsamples (less than 50 nL) deposited in the hollow cathode discharge source is reported here. Instrumentation, operation, and sample preparation procedures are described.

Electrodes