PubMed Health⌕ Search

PubMed · 3548593

Comparison of two biological aerosol sampling methods.

Abstract

Two biological aerosol samplers, the Andersen two-stage microbial impactor and the May three-stage glass impinger, were examined to determine the benefits and effectiveness of the May sampler compared with the Andersen sampler, one of the most widely accepted samplers. Side-by-side samples were collected during simulated wastewater spray irrigation dispersion studies. Escherichia coli colony counts and air concentrations were statistically treated to determine the dependability of the May results with respect to the Andersen results. After data pairs containing potentially overloaded Andersen counts were eliminated, a linear regression of the remaining data was performed. It indicates that although the May sampler reports 82% of the Andersen sampler value, the correlation between the two samplers is good with an r2 value of 0.84. This comparison indicates that although there are differences between the two samplers, they do give comparable results and that when both are used in a sampling program, they tend to complement each other.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

N J Zimmerman, P C Reist, A G Turner. 1987. Comparison of two biological aerosol sampling methods.. https://doi.org/10.1128/aem.53.1.99-104.1987

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Invisible Threats, Relentless Hunters: Biosurveillance of Airborne Plant Pathogens.

Airborne dispersal enables plant pathogens to travel across fields, regions, and continents, fueling rapid epidemics and emerging disease threats. Biosurveillance, the systematic monitoring of airborne inoculum, offers the opportunity to detect pathogens before symptoms appear and informs timely, risk-based management. Recent advances in air sampling, molecular diagnostics, metagenomics, and imaging technologies have expanded the scale and resolution of pathogen monitoring, from single-species qPCR assays to community-level aerobiome surveys. Integration of biosurveillance data with decision-support systems, remote sensing, and artificial intelligence is transforming early-warning capabilities and providing novel insights into pathogen ecology, evolution, and fungicide resistance. Yet major challenges remain, including assay standardization, data interpretation, and translation into actionable tools for growers. This review synthesizes current approaches, highlights case studies in which biosurveillance has advanced disease management, and outlines future directions toward coordinated surveillance networks and precision agriculture applications.

Air Microbiology↗

Air-liquid interface biofilms of Bacillus cereus: formation, sporulation, and dispersion.

Biofilm formation by Bacillus cereus was assessed using 56 strains of B. cereus, including the two sequenced strains, ATCC 14579 and ATCC 10987. Biofilm production in microtiter plates was found to be strongly dependent on incubation time, temperature, and medium, as well as the strain used, with some strains showing biofilm formation within 24 h and subsequent dispersion within the next 24 h. A selection of strains was used for quantitative analysis of biofilm formation on stainless steel coupons. Thick biofilms of B. cereus developed at the air-liquid interface, while the amount of biofilm formed was much lower in submerged systems. This suggests that B. cereus biofilms may develop particularly in industrial storage and piping systems that are partly filled during operation or where residual liquid has remained after a production cycle. Moreover, depending on the strain and culture conditions, spores constituted up to 90% of the total biofilm counts. This indicates that B. cereus biofilms can act as a nidus for spore formation and subsequently can release their spores into food production environments.

Air Microbiology↗

Characterization of airborne molds, endotoxins, and glucans in homes in New Orleans after Hurricanes Katrina and Rita.

In August and September 2005, Hurricanes Katrina and Rita caused breeches in the New Orleans, LA, levee system, resulting in catastrophic flooding. The city remained flooded for several weeks, leading to extraordinary mold growth in homes. To characterize the potential risks of mold exposures, we measured airborne molds and markers of molds and bacteria in New Orleans area homes. In October 2005, we collected air samples from 5 mildly water-damaged houses, 15 moderately to heavily water-damaged houses, and 11 outdoor locations. The air filters were analyzed for culturable fungi, spores, (1-->3,1-->6)-beta-D-glucans, and endotoxins. Culturable fungi were significantly higher in the moderately/heavily water-damaged houses (geometric mean=67,000 CFU/m3) than in the mildly water-damaged houses (geometric mean=3,700 CFU/m3) (P=0.02). The predominant molds found were Aspergillus niger, Penicillium spp., Trichoderma, and Paecilomyces. The indoor and outdoor geometric means for endotoxins were 22.3 endotoxin units (EU)/m3 and 10.5 EU/m3, respectively, and for (1-->3,1-->6)-beta-D-glucans were 1.7 microg/m3 and 0.9 microg/m3, respectively. In the moderately/heavily water-damaged houses, the geometric means were 31.3 EU/m3 for endotoxins and 1.8 microg/m3 for (1-->3,1-->6)-beta-D-glucans. Molds, endotoxins, and fungal glucans were detected in the environment after Hurricanes Katrina and Rita in New Orleans at concentrations that have been associated with health effects. The species and concentrations were different from those previously reported for non-water-damaged buildings in the southeastern United States.

Air Microbiology↗