PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 4081758

Radioactivity connected with coal burning.

R Borio·G Campos Venuti·S Risica·S Simula
View original source ↗Export metadata ↓

Abstract

The enhanced environmental radioactivity resulting from the operation of a 72 MWe brown coal-fired power plant in central Italy is considered. A source-related control procedure is suggested. The calculated values for the atmospheric dispersion of radioactive effluents and the results of some measurements on brown coals, ash, environmental samples and gamma-exposure levels performed at representative points are reported.

Explore related subjects

CoalCoal MiningEnvironmental PollutionHumansItalyMicroclimatePower PlantsRadioisotopesJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R Borio, G Campos Venuti, S Risica, S Simula. 1985. Radioactivity connected with coal burning.. https://doi.org/10.1016/0048-9697(85)90203-7

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Simulating the transformation of heavy metals during coal or sewage sludge combustion.

A mathematical model (FPM) is presented to predict the transformation of heavy metals in the downstream of combustor or incinerator. The model accounts for the transformation of heavy metals through the combined effect of condensation, nucleation, coagulation, external force and thermophoresis force. The calculation of heavy metals is embodied in the post-processor appended to Fluent soft. Before the simulation, velocity, temperature, PbCl2 concentration and other initial parameters are obtained by experiment. In addition, the transformation of PbCl2 is also experimentally studied. The comparison of experimental and predicted results indicate that the fine particle model (FPM) is valid for predicting the transformation of heavy metals in the downstream of incinerator or combustor.

Coal↗
PubMed2006

Environmental impact of a coal combustion-desulphurisation plant: abatement capacity of desulphurisation process and environmental characterisation of combustion by-products.

The fate of trace elements in a combustion power plant equipped with a wet limestone flue gas desulphurisation (FGD) installation was studied in order to evaluate its emission abatement capacity. With this aim representative samples of feed coal, boiler slag, fly ash, limestone, FGD gypsum and FGD process water and wastewater were analysed for major and trace elements using the following techniques: inductively coupled plasma-mass spectrometry (ICP-MS), inductively coupled plasma-atomic emission spectrometry (ICP-AES), ion chromatography (IC), ion selective electrode (ISE) and atomic absorption spectroscopy (AAS). Mass balances were established allowing to determine the element partitioning behaviour. It was found that, together with S, Hg, Cl, F, Se and As were those elements entering in the FGD plant primarily as gaseous species. The abatement capacity of the FGD plant for such elements offered values ranged from 96% to 100% for As, Cl, F, S and Se, and about 60% for Hg. The environmental characterisation of combustion by-products (boiler slag, fly ash and FGD gypsum) were also established according to the Council Decision 2003/33/EC on waste disposal. To this end, water leaching tests (EN-12457-4) were performed, analysing the elements with environmental concern by means of the aforementioned techniques. According to the leaching behaviour of combustion by-products studied, these could be disposed of in landfills for non-hazardous wastes.

Coal↗